PDA

View Full Version : spray on bedliner



splwj47
06-08-2012, 01:51 PM
so i have seen a few boxes done with spray on bedliner, and i like the look of it and am thinking about doing it to my box. where doe you guys get spray on bedliner from? what are some good brands to use?

RangerDangerV2
06-08-2012, 02:06 PM
3m stuff is good... I think you can get it at auto parts stores..

splwj47
06-08-2012, 02:07 PM
do they make stuff that comes in a spray can or is it all just come in a paint can and u have to use a paint gun to spray it?

RangerDangerV2
06-08-2012, 02:09 PM
they make the stuff in a can... thats what I use.

BrownVanMan
06-08-2012, 02:10 PM
i get the dupli color stuff from oriely. i used 1 can on all 4 15 inch wheels and got1 solid and 1 iffy coat on my box. the box was for an 8 so it was a bit small. i recomend getting some 99c black paint to spray underneath and then sand quick just so you dont use as much of the expensive bedliner.

snoopdan
06-08-2012, 02:12 PM
Don't skimp with the walmart spray ****. Go to a real shop that has a bedlining setup. Its a hot coat epoxy process thats at 150 degrees but by time it gets on the surface of the box its cold and there permenantly. I did my entire wall inside and out with the stuff and it will hold water now. Well worth the cost.

Here is a fart box I did in 2007

http://i81.photobucket.com/albums/j211/snoopdan1/finishedboxs.jpg

splwj47
06-08-2012, 02:17 PM
pic doesnt work

---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------

im gonna pic up a can at piston ring and see how it works its cheap enough to give it a try anyways

QuietEclipse29
06-08-2012, 02:21 PM
Stuff called Raptor Upol Bedliner works great.

splwj47
06-08-2012, 06:53 PM
Don't skimp with the walmart spray ****. Go to a real shop that has a bedlining setup. Its a hot coat epoxy process thats at 150 degrees but by time it gets on the surface of the box its cold and there permenantly. I did my entire wall inside and out with the stuff and it will hold water now. Well worth the cost.

Here is a fart box I did in 2007

http://i81.photobucket.com/albums/j211/snoopdan1/finishedboxs.jpg

hey snoop how much did it cost you to have it done, the stuff i bought is alright but it isnt very gritty.

snoopdan
06-08-2012, 06:57 PM
hey snoop how much did it cost you to have it done, the stuff i bought is alright but it isnt very gritty.

paid a bedliner shop $50 ....Well worth it, I had that box for about 5 years and not one scratch on it. I threw it around all the time just to see if it would crack/peal and nope, not one bit!

N8er
06-11-2012, 05:22 PM
Wow that bed liner looks awesome. I'm still trying to decide on my new box finish, and this is definitely on the top of my list now.

RAM_Designs
06-11-2012, 09:09 PM
I've used the roll-on Duplicolor stuff from Wal-Mart...works well, resists chipping and peeling of MDF at the corners/edges.

goingdef
06-11-2012, 09:22 PM
The 3m stuff isn't bad this is two cans and one can of the cheapest flat black they had first(wal-mart) just to stop the bedliner from soaking in so bad.
http://i186.photobucket.com/albums/x81/animalnut1310/P5260056.jpg