PDA

View Full Version : Dayton 5 1/4's



scotts16
03-25-2004, 07:52 PM
I found out that I can put 5 1/4 in my doors so I started looking around. On Parts Express I came across the Dayton Aluminum 5 1/4's. They are cheap and have a fairly small mounting depth. Has anybody used these and what do you think of them?

Link (http://www.partsexpress.com/pe/pshowdetl.cfm?&PartNumber=295-330&DID=7)

Scott

Moe Lester
03-26-2004, 01:04 AM
They have a very low RMS rating, they are 8 ohms, and the frequency range is not what you would want for a speaker to listen to. with that you would need to buy a set of tweeters and possibly crossovers. They dont cost very much at all, I personally wouldnt expect them to be anywhere near good.