PDA

View Full Version : bassracin wall...



RangerDangerV2
05-16-2012, 07:18 PM
whatcha think.... 12 cu ft net tuned to 43hz with 5 6 inch aeros

http://i1161.photobucket.com/albums/q513/bumpin101/Capture.png

its for 2 apxx 18s on 10k
opinions???

Kangaroux
05-16-2012, 07:28 PM
Just do a slot port instead of that many aero's. Why not do a port on the driver side if the meter is on the passenger side?

RangerDangerV2
05-16-2012, 07:30 PM
Just do a slot port instead of that many aero's. Why not do a port on the driver side if the meter is on the passenger side?

i tried but the slot port took up a lot of room...

basscort2009
05-16-2012, 07:32 PM
slot port sir. angle the subs to squeez as tight and to the passenger side as possible. one on top of the other or at least as close to straight up and down as you can. then do your slot port on the driver side

bhsdriller
05-16-2012, 07:40 PM
yeah, for anything dbdrag you want it like they're saying...subs on passenger side/slot port on drive. I don't see the aeros on the bottom working too well

RangerDangerV2
05-16-2012, 07:47 PM
thanks guys!! Ill have a new wall up in a few minutes...

RangerDangerV2
05-16-2012, 08:02 PM
http://i1161.photobucket.com/albums/q513/bumpin101/Capture-1.png

this one is tuned to about 46.... 276 square inches of port...

RangerDangerV2
05-16-2012, 08:16 PM
opinions??? looking for a 160

CAT MAN
05-16-2012, 08:35 PM
opinions??? looking for a 160

more port higher tuning.

RangerDangerV2
05-16-2012, 08:38 PM
more port higher tuning.

well shes still my daily driver and I will be playing music and demoing... 46 is about as high as I would like to go... I need at least a 155. think its possible??

CAT MAN
05-16-2012, 08:39 PM
well shes still my daily driver and I will be playing music and demoing... 46 is about as high as I would like to go... I need at least a 155. think its possible??

55 yes 60 no.

RangerDangerV2
05-16-2012, 08:42 PM
well see what it will do.... I think that that much cone area is gonna put up some impressive numbers in a small cab... This build is gonna be a while though, I need to get my first build done lol

SourDeez
05-16-2012, 08:51 PM
I would like to hear this when its done

pro-rabbit
05-16-2012, 09:03 PM
well shes still my daily driver and I will be playing music and demoing... 46 is about as high as I would like to go... I need at least a 155. think its possible??

There is more to it then just the enclosure at that point. I would say do a removable port for daily though. That way you have an SPL setup and daily with out much hassle.

RangerDangerV2
05-16-2012, 09:04 PM
I would like to hear this when its done

well when I save up another 4k it will be done.... Im guessing beginning next summer when it is completely done... Im gonna have 6 xs d3100s, my 300 amp e.a. alt, and 2 saz 3500s... if you compete im sure that you will see me.

RangerDangerV2
05-16-2012, 09:05 PM
There is more to it then just the enclosure at that point. I would say do a removable port for daily though. That way you have an SPL setup and daily with out much hassle.

how would that work with the angle??? i have seen removeable ports but they were all straight with no 90 degree bend...

pro-rabbit
05-16-2012, 09:10 PM
how would that work with the angle??? i have seen removeable ports but they were all straight with no 90 degree bend...

Depends on how you want to do it really. Several ways to do it though. You can build the SPL port and then make the daily port just slide in. Or you can build a giant whole in the enclosure and make it to where you can bolt in one or the other. All up to you really.

RangerDangerV2
05-16-2012, 09:12 PM
that is a great idea pro-rabbit thanks man! I really want to get into the competition scene and I figured why not start when Im young... and I think that this setup is gonna be perfect for what I want.... now if I could just finish my current setup lulz

RangerDangerV2
05-17-2012, 06:46 PM
http://i1161.photobucket.com/albums/q513/bumpin101/Capture-2.png

new design... the opening for the removeable ports is 12 inches so the max port area will be a little under 400 sq inches. I will be making a port for 65hz and a port for 43 hz.
Buck still dont think that I can get a 160 with 400sq. inches of port??

NT_Hardcore
05-17-2012, 06:53 PM
so this is for bass race? why is the goal a 55 or 60? take into account that you will need to have a good song for bass race if that is the intension.

RangerDangerV2
05-17-2012, 07:01 PM
so this is for bass race? why is the goal a 55 or 60? take into account that you will need to have a good song for bass race if that is the intension.
bassrace and db drag... thats why I have 2 different ports.

RangerDangerV2
05-17-2012, 08:00 PM
opinions on new design plz...

Buck
05-17-2012, 08:11 PM
I'm not 100% sure what exactly has been talked about, but I think testing is going to be best for you. That box, make the ports interchangeable and play with it a lot.

RangerDangerV2
05-17-2012, 08:13 PM
I'm not 100% sure what exactly has been talked about, but I think testing is going to be best for you. That box, make the ports interchangeable and play with it a lot.

ya I here ya there, experimentation is like 90% of this stuff... but anyway this wall is for 2 apxx18s on 2 saz 3500s...