PDA

View Full Version : Recommend a good box for me to build tonight!



rdlyn13000
05-11-2012, 06:10 PM
I have 2-12" W7 going in a caddy. I have a sheet of mdf and a case of beer sitting here. I want to build a quick box that will hit loud and low out of the free box plans thread

http://www.caraudio.com/forums/enclosure-design-construction-help/137804-free-box-plans.html

JL says they need 1.75 cubic feet each in a ported enclosure, which of these would be a good quick box for me to build tonight? The opening of the trunk is 40" wide at the top for about 18" out then 34" wide at the bottom of the trunk if that makes sense. Inside the trunk I can go 40 wide and 32 deep with 15.5" clearance to the bottom of the 6x9s but maybe up to 18" or so if it stops before the 6x9. Any help is appreciated!!

rdlyn13000
05-11-2012, 06:20 PM
Is this one any good ya think??

ImageShack® - Online Photo and Video Hosting (http://imageshack.us/photo/my-images/77/43cubes32hz52sqin9ip.png/)

ssteele18
05-11-2012, 08:39 PM
I have 2-12" W7 going in a caddy. I have a sheet of mdf and a case of beer sitting here. I want to build a quick box that will hit loud and low out of the free box plans thread

http://www.caraudio.com/forums/enclosure-design-construction-help/137804-free-box-plans.html

JL says they need 1.75 cubic feet each in a ported enclosure, which of these would be a good quick box for me to build tonight? The opening of the trunk is 40" wide at the top for about 18" out then 34" wide at the bottom of the trunk if that makes sense. Inside the trunk I can go 40 wide and 32 deep with 15.5" clearance to the bottom of the 6x9s but maybe up to 18" or so if it stops before the 6x9. Any help is appreciated!!

Well for one, I would suggest NOT drinking the case of beer until after you're done cutting...

rdlyn13000
05-11-2012, 09:12 PM
Lol, box is already cut, just cracked first beer. Point was it's Friday night and I want to build something...