PDA

View Full Version : How do you connect a 7 band eq to the farenheit 8.3 touchscreen deck



wmblocke
05-05-2012, 02:22 PM
How do you connect a 7 band eq to the farenheit 8.3 touchscreen deck threw the decks already speaker pre amp speaker wire set up? Nitro/ p tek 7 band with 3 pre set to the farenheit 8.3 motorized touchscreen. Or should I forget the eq and flow threw the deck, (my amp pushes 2000 watts).

pickup1
05-05-2012, 02:49 PM
speaker and pre amp are 2 diff.things...are you going to use speakers leads or rcas to run this?
if rcas,run the front,or rear,from the radio,to the input of the eq and run your other rcas to the eq.

>>SQL<<
05-05-2012, 02:54 PM
what amp do you have that pushes 2,000 watts?

pickup1
05-05-2012, 03:19 PM
what amp do you have that pushes 2,000 watts?

boss hi current!

Louisiana_CRX
05-05-2012, 03:52 PM
How do you connect a 7 band eq to the farenheit 8.3 touchscreen deck threw the decks already speaker pre amp speaker wire set up? Nitro/ p tek 7 band with 3 pre set to the farenheit 8.3 motorized touchscreen. Or should I forget the eq and flow threw the deck, (my amp pushes 2000 watts).

Does the amp push 2000 real watts or 2000 lightning strike watts :confused: How much power do your woofers put out ? What brand amp is it ? That might help knowing the answer to some of these questions on what would be your best options

wmblocke
05-05-2012, 03:57 PM
Im running the acoustic demon series,... Thank you again, I thought I might of had to splice. That was very helpful.

Louisiana_CRX
05-05-2012, 04:04 PM
Im running the acoustic demon series,... Thank you again, I thought I might of had to splice. That was very helpful.

No you shouldn't have to splice anything it should all connect with RCA interconnects