PDA

View Full Version : danger ranger build



RangerDangerV2
04-23-2012, 11:42 PM
Well I wish I would have taken some more pictures today but I was movin quick to get some work done...

http://i1161.photobucket.com/albums/q513/bumpin101/P1240006.jpg

it's not much but it is a start, still LOTS of work to do but it is going along smoothly...

Bettr n' Revrse
04-23-2012, 11:59 PM
http://thingist.com/user_uploads/3213623821591170754.jpg
;)

VisceralSound
04-24-2012, 12:01 AM
Are you changing what woofer is going in there? or are you still using that 18?

*tuned

RangerDangerV2
04-24-2012, 12:02 AM
aww.. thanks bnr...

murph
04-24-2012, 12:02 AM
Really squeezing it in there, bet that wangs.

RangerDangerV2
04-24-2012, 12:02 AM
Are you changing what woofer is going in there? or are you still using that 18?

*tuned

havent ever put that 18 in anything nor has it ever seen power.... that is what this build is for...

RangerDangerV2
04-24-2012, 12:04 AM
Really squeezing it in there, bet that wangs.

ya its a pretty tight fit...

RangerDangerV2
05-24-2012, 07:34 PM
today I ordered my deh p8400 bh, 100 of knu kca, 100 sq feet of audio technix 60 mil deadner, firewall bushings, krystal rca kables, xs xp950, fuses and a few fuse holders... last thing to buy is the alt and few other odds and ends... will post picks next week with everything installed.

RangerDangerV2
05-28-2012, 09:06 PM
got my knu krystal rcas and my knu cca power wire in today.... dayum! is that shiz flexible.

Bettr n' Revrse
05-28-2012, 09:20 PM
got my knu krystal rcas and my knu cca power wire in today.... dayum! is that shiz flexible.

You got CCA for an SAZ 3500???

RangerDangerV2
05-28-2012, 09:24 PM
You got CCA for an SAZ 3500???

this is how I saw it... either way I am going to need two runs of wire... being that with 1 run of ofc I can only draw 300 amps... but with two runs of cca I can draw 500 amps, 2 runs of cca is cheaper than 2 runs of ofc. I dont need 2 runs of ofc because I wont be drawing 600 amps.

Bettr n' Revrse
05-28-2012, 09:29 PM
I suppose...

splwj47
05-28-2012, 09:33 PM
this is how I saw it... either way I am going to need two runs of wire... being that with 1 run of ofc I can only draw 300 amps... but with two runs of cca I can draw 500 amps, 2 runs of cca is cheaper than 2 runs of ofc. I dont need 2 runs of ofc because I wont be drawing 600 amps.

so what the hÉll you waiting for get that wire and rcas installed!!!!

RangerDangerV2
05-28-2012, 09:39 PM
so what the hÉll you waiting for get that wire and rcas installed!!!!

firewall bushings and flex loom.

---------- Post added at 08:39 PM ---------- Previous post was at 08:39 PM ----------

and a headunit.

myjaja
05-28-2012, 09:44 PM
Awesome man, looks good.. Gonna probably be doing a good 142 outlaw and be vibrating a couple of coins in your cup holder. :naughty:

RangerDangerV2
05-28-2012, 09:49 PM
Awesome man, looks good.. Gonna probably be doing a good 142 outlaw and be vibrating a couple of coins in your cup holder. :naughty:

you must be joking...

RangerDangerV2
05-31-2012, 09:12 PM
laying down deadner as we speak... pics later.

RangerDangerV2
05-31-2012, 11:47 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG078.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG077.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG076.jpg

I got the first layer of deadner down, found a lace to run power and ground wire, and of course added some vinyl.

RangerDangerV2
06-03-2012, 12:25 AM
got the 3rd layer of deadner down tonight, power wires hidden, and routed the rca's.... tomorrow I will machine some dual inputs, and install the hu...

mazdakid
06-03-2012, 12:29 AM
What you using for the dual inputs? What you making them on?

RangerDangerV2
06-03-2012, 12:30 AM
What you using for the dual inputs? What you making them on?

aluminum, drill press.

mazdakid
06-03-2012, 12:32 AM
Cool. I work at a machine shop. Kinda nice for some ca stuff.

RangerDangerV2
06-03-2012, 12:36 AM
Cool. I work at a machine shop. Kinda nice for some ca stuff.

nice... Ive used cnc and cad before but sadly I dont have a mill at my house.... but my dad does custom fab work so I have quite the assortment of tools.

RangerDangerV2
06-05-2012, 07:34 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG080.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG082.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG083.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG084.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG085.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG086.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG087.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG088.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG089.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG090.jpg

RangerDangerV2
06-05-2012, 07:37 PM
the place where the wires go through the floor is covered in foam on both sides and sealed very well.. there is only a slight hump under the carpet where the wires come through the floor, now their are 3 layers of deadener on the roof and the box is completely finished...

RangerDangerV2
06-05-2012, 07:58 PM
still lots to do but its getting there...

mazdakid
06-05-2012, 08:05 PM
Looks like you need to sharpen your chisel for your sub cutout lol.
Hurry up and get it playing.

RangerDangerV2
06-05-2012, 08:08 PM
Looks like you need to sharpen your chisel for your sub cutout lol.
Hurry up and get it playing.

like an idiot I didnt cut the hole before I glued the thing together so I had to use a sawzall to cut through the double baffle... lulz I need to find more cable lugs and buy my alt on thursday and then it will be done...

Imtjnotu
06-05-2012, 08:10 PM
running a clorox cap under the seat huh

mazdakid
06-05-2012, 08:12 PM
**** id hate to have to use a sawzall for a cutout.
My jigsaw blades make it through a double baffle no problem.

RangerDangerV2
06-05-2012, 08:12 PM
running a clorox cap under the seat huh

maybe...:uhoh:

RangerDangerV2
06-05-2012, 08:13 PM
**** id hate to have to use a sawzall for a cutout.
My jigsaw blades make it through a double baffle no problem.

didnt have my beastly milwakee at the time so I had to use a pos black and decker.... Im sure I will make another couple of boxes though...

RangerDangerV2
06-06-2012, 10:32 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG091.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG092.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG093.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG094.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG095.jpg

mazdakid
06-06-2012, 10:39 PM
Does it play?

RangerDangerV2
06-06-2012, 10:53 PM
Does it play?

waiting on fuses and an alternator. but I dont expect it to play well with others...

RangerDangerV2
06-06-2012, 11:47 PM
nobody cares about my 100+ hours of work.... :crying:

Falcons
06-06-2012, 11:52 PM
nobody cares about my 100+ hours of work.... :crying:

i do i do!

RangerDangerV2
06-06-2012, 11:56 PM
i do i do!

:blush:

mylows10
06-06-2012, 11:56 PM
sonoma or s10 ?

Falcons
06-06-2012, 11:57 PM
:blush:

:o~~~~~<=======3

RangerDangerV2
06-06-2012, 11:59 PM
sonoma or s10 ?
s10

mylows10
06-07-2012, 12:03 AM
cool i miss mine . i ran dual alts on mine.still have the smaller one for sale or trade too.i know alot about these

rdlyn13000
06-07-2012, 12:03 AM
Looks good man! I wanna hear it! What part of MN are you in? Im in ---------------------------------------------->

mylows10
06-07-2012, 12:04 AM
i also have the dual inputs for sale too

RangerDangerV2
06-07-2012, 12:13 AM
cool i miss mine . i ran dual alts on mine.still have the smaller one for sale or trade too.i know alot about these

dude, Its a ranger... I thought you were kidding about the s10 or sonoma thing.... pm me about those dual inputs.

---------- Post added at 11:13 PM ---------- Previous post was at 11:13 PM ----------


Looks good man! I wanna hear it! What part of MN are you in? Im in ---------------------------------------------->

mora, but I frequently visit moose lake and duluth...

mylows10
06-07-2012, 12:15 AM
i thought so ,they are hard to get loud . sending pm

rdlyn13000
06-07-2012, 12:16 AM
dude, Its a ranger... I thought you were kidding about the s10 or sonoma thing.... pm me about those dual inputs.

---------- Post added at 11:13 PM ---------- Previous post was at 11:13 PM ----------




mora, but I frequently visit moose lake and duluth...

Your a little ways away, I have a cabin in Willow River! Might have to hit ya up next time I head that way...

ace_800
06-07-2012, 12:17 AM
Looks good man, bet it will be louder than the 6.5's, lol. Just got my custom 10 finished today of the exile 2400. Mucho louder.

RangerDangerV2
06-07-2012, 12:20 AM
goal for this bish is 150 but my guess is a 46 @33...

ace_800
06-07-2012, 12:27 AM
goal for this bish is 150 but my guess is a 46 @33...

My goal was to just break 130 lol. Should be close to 140 now.

RangerDangerV2
06-07-2012, 12:30 AM
My goal was to just break 130 lol. Should be close to 140 now.

I think with a few boxes and lots of tweaking I could probably get 152 tops...

DB-Audio
06-07-2012, 07:13 AM
nice build so far man

RangerDangerV2
06-07-2012, 11:48 AM
nice build so far man

not bad for a punk kid ehh?? :naughty:

04murdalanche
06-07-2012, 12:06 PM
mora, but I frequently visit moose lake and duluth...


my grandparents live in duluth.. talk about a small world. will definitely hit you up the next time i roll up there, should be around the 4th of july.

tylork92
06-07-2012, 12:54 PM
looks good man. Fitting batteries and amps and everything in a ranger is a PIA. I just finished a decent build in my 93 ranger. ill make a build log soon.

RangerDangerV2
06-07-2012, 02:13 PM
my grandparents live in duluth.. talk about a small world. will definitely hit you up the next time i roll up there, should be around the 4th of july.
cool man! i got it playing now at around 2k (just a guess) and this motha fuqqa is LOUD and LOW im running the stock alt with out the big three but in a week or two I will have my dc power alt....

04murdalanche
06-07-2012, 03:28 PM
cool man! i got it playing now at around 2k (just a guess) and this motha fuqqa is LOUD and LOW im running the stock alt with out the big three but in a week or two I will have my dc power alt....

nice, i just got my DC xp 270, havent put it in yet but its beefy as fuuuuccc.

nice build man i wish i had an ext cab.

splwj47
06-07-2012, 03:33 PM
cool man! i got it playing now at around 2k (just a guess) and this motha fuqqa is LOUD and LOW im running the stock alt with out the big three but in a week or two I will have my dc power alt....

wheres the vids brah?

RangerDangerV2
06-07-2012, 03:45 PM
wheres the vids brah?

all I have is a sh1tty camera right now... my cannons are at my other house...

RangerDangerV2
06-07-2012, 03:47 PM
nice, i just got my DC xp 270, havent put it in yet but its beefy as fuuuuccc.

nice build man i wish i had an ext cab.

they are pricey but very worth it from what I heard... supposedly they can do 250 at idle and 300 by 1500 rpms....

04murdalanche
06-07-2012, 03:59 PM
they are pricey but very worth it from what I heard... supposedly they can do 250 at idle and 300 by 1500 rpms....

i got mine cheap on here for 370. thank the lord, but yeah theres vids of em puttin out 210 at idle all day long, they put out full output and a little more by 1400 or so

VisceralSound
06-07-2012, 04:17 PM
Show some numbers of it currently just got reference sake, I did a 142 give it a few db's (forgot the exact number, he has yet to post them on facebook) @40hz off stock alt and no big 3.

RangerDangerV2
06-07-2012, 04:20 PM
I dont have a meter at my house right now but if I had to guess off of roughly 2k I would have to say 143@ around 30hz...

RangerDangerV2
06-08-2012, 02:59 AM
did some demos today... this bish pulls hairtricks no problem but that is to be expected... the box is a little peaky but it just MURDERS the lows. I cant wait to get some real power to it... on 2k it only has about a 1/2" of excursion if that.

VisceralSound
06-08-2012, 03:04 AM
I dont have a meter at my house right now but if I had to guess off of roughly 2k I would have to say 143@ around 30hz...
Do what I do, go to local car competitions, you should come with me to the show in Winona in August. The event holder is AWESOME.

RangerDangerV2
06-08-2012, 03:06 AM
Do what I do, go to local car competitions, you should come with me to the show in Winona in August. The event holder is AWESOME.

my team has a meter but I just dont feel like driving an hour to use it... Ill be there for sure.

VisceralSound
06-08-2012, 03:11 AM
my team has a meter but I just dont feel like driving an hour to use it... Ill be there for sure.

Yeah an hours a pain, which part of MN are you in again?

RangerDangerV2
06-08-2012, 03:21 AM
Yeah an hours a pain, which part of MN are you in again?

mora

VisceralSound
06-08-2012, 03:22 AM
mora
North north eh? How was the winter for you? IIRC the northern side of MN got more snow then us Rochester folk :p

RangerDangerV2
06-08-2012, 03:53 AM
not good at all... didnt even start my sled.

VisceralSound
06-08-2012, 04:11 AM
not good at all... didnt even start my sled.

Yeah we had like 3 or 4 weeks of REAL winter? not even? haha then the occasional show fall here and there, I didn't mind it one bit.

The_Grimy_One
06-08-2012, 04:45 AM
Not gonna lie! This Schit looks clean!

05fronty
06-08-2012, 08:48 AM
how close is that port to the roof?

RangerDangerV2
06-08-2012, 11:17 AM
how close is that port to the roof?
I was wondering if somebody was going to say something as I was worried about the ports being to close.... but they are 13 inches away and I havent experienced any problems so far...

RangerDangerV2
06-08-2012, 03:11 PM
just ordered a dc power 300 amp spx alt....

RangerDangerV2
06-08-2012, 03:37 PM
http://i1161.photobucket.com/albums/q513/bumpin101/th_MOV032.jpg (http://s1161.photobucket.com/albums/q513/bumpin101/?action=view&current=MOV032.mp4)

RangerDangerV2
06-08-2012, 04:05 PM
holla I got vids up fools

RangerDangerV2
06-08-2012, 04:50 PM
click on the picture

RangerDangerV2
06-08-2012, 06:50 PM
pretty happy with the box so far... been doing a lot of demos. The box seems to play very very well form 18-40hz but after that it is a very steep dropoff... this thing really shines at 22hz though, my truck is being torn apart and Im not even at full power yet...

wenn_du_weinst
06-08-2012, 06:53 PM
sounds like you need to tune higher.

Bettr n' Revrse
06-08-2012, 06:55 PM
sounds like you need to tune higher.

Thats what I was thinking...

RangerDangerV2
06-08-2012, 08:24 PM
sounds like you need to tune higher.

right now Im tuned to 33 and I really like how low it gets... but Ill experiment with tuning, its pretty simple with the aeros...

myjaja
06-11-2012, 08:33 PM
http://i1161.photobucket.com/albums/q513/bumpin101/th_MOV032.jpg (http://s1161.photobucket.com/albums/q513/bumpin101/?action=view&current=MOV032.mp4)


Awesome man, looks good.. Gonna probably be doing a good 142 outlaw and be vibrating a couple of coins in your cup holder.:naughty:

:naughty:

RangerDangerV2
06-11-2012, 08:45 PM
:naughty:

Its more like a 145 outlaw... on 1500 watts foo, soon to be 3500.

RangerDangerV2
06-11-2012, 08:48 PM
I honestly dont know what it meters at...nor do I really care because this is a demo vehicle... all I know is that this bish is loud and low... like hard to breath loud.

RangerDangerV2
06-19-2012, 09:41 PM
wtf!! just redid some math on by current enclosure, I mustve messed up before, my 18 is in 5.7 cu ft and its tuned to 40... I may be louder than I thought... the meter will tell.

NoLoud4U
06-19-2012, 09:59 PM
That's not doing a hairtrick... Sorry but that's vibrating a shirt.

RangerDangerV2
06-19-2012, 10:13 PM
That's not doing a hairtrick... Sorry but that's vibrating a shirt.

sorry its not up to your standards? but it does do a hairtrick and Im not even running full power yet... jeez sorry I can t have as nice of a system as you bro.

mazdakid
06-19-2012, 10:21 PM
I like your door speakers in the video. When you gonna turn the sub on?

RangerDangerV2
06-19-2012, 10:23 PM
I like your door speakers in the video. When you gonna turn the sub on?

as soon as this comes in
DPA Series Amplifiers (http://www.dualav.com/mobileaudio/dpa.php)

NoLoud4U
06-19-2012, 10:23 PM
sorry its not up to your standards? but it does do a hairtrick and Im not even running full power yet... jeez sorry I can t have as nice of a system as you bro.

It's cool. I can't do one. But you said it can do hair tricks and if that vid shows anything it shows it's nowhere close to doing a hair trick.

RangerDangerV2
06-19-2012, 10:25 PM
It's cool. I can't do one. But you said it can do hair tricks and if that vid shows anything it shows it's nowhere close to doing a hair trick.

yes because videos taken with phones show everything. when my alt comes in a week and a half and my sub starts to move more than a 1/2"... ill get back to you.

NoLoud4U
06-19-2012, 10:32 PM
yes because videos taken with phones show everything. when my alt comes in a week and a half and my sub starts to move more than a 1/2"... ill get back to you.

It shows it's not close to a hair trick. That shirt would be stepping out the windows. Even going full power it's not going to add that much. It will help but its not going to do what your thinking.

RangerDangerV2
06-19-2012, 10:33 PM
It shows it's not close to a hair trick. That shirt would be stepping out the windows. Even going full power it's not going to add that much. It will help but its not going to do what your thinking.

did I also mention that that was with both windows open...

NoLoud4U
06-19-2012, 10:36 PM
did I also mention that that was with both windows open...

Ok...

RangerDangerV2
06-19-2012, 10:38 PM
Ok...

you are obviously to simple to understand. pressure builds up on the side that the window is closed up on... that pressure is forced out of the open window resulting in almost twice as much airflow out the open window. when the two windows are open the pressure is released equally out of the two.

NoLoud4U
06-19-2012, 10:43 PM
you are obviously to simple to understand. pressure builds up on the side that the window is closed up on... that pressure is forced out of the open window resulting in almost twice as much airflow out the open window. when the two windows are open the pressure is released equally out of the two.

Listen man. My old setup would not even think about moving hair. But with both windows done it would move a shirt more then that. I'll see if I can find the vid

RangerDangerV2
06-19-2012, 10:47 PM
Listen man. My old setup would not even think about moving hair. But with both windows done it would move a shirt more then that. I'll see if I can find the vid

no, you listen, this is my system and my vehicle, you cannot even say anything because you have never heard or felt it. I am the only person who truly knows what it is capable of. and I know that it can move hair, not very much right now but like I said I am not even close to full power of full excursion. and that shirt was moving 3 or four inches, just watch the name josh and you will see what I am talking about.

NoLoud4U
06-19-2012, 10:47 PM
YouTube - A little flex (http://m.youtube.com/watch?v=rYL4fORjdaY)

kushy_dreams
06-19-2012, 10:47 PM
Thats about what my system does to a shirt and mine meters in the low 40s on music or tones. Very impressive low end extension if the enclosure is indeed tuned to 40hz, though your claimed steep roll off above 40 seems kind of odd if the tuning is 40.

Falcons
06-19-2012, 10:48 PM
cant we all just get along?

RangerDangerV2
06-19-2012, 10:49 PM
Thats about what my system does to a shirt and mine meters in the low 40s on music or tones. Very impressive low end extension if the enclosure is indeed tuned to 40hz, though your claimed steep roll off above 40 seems kind of odd if the tuning is 40.

sorry that was based off of a goofy song, I played a 50hz tone and it hurt if that means anything...

NoLoud4U
06-19-2012, 10:49 PM
no, you listen, this is my system and my vehicle, you cannot even say anything because you have never heard or felt it. I am the only person who truly knows what it is capable of. and I know that it can move hair, not very much right now but like I said I am not even close to full power of full excursion. and that shirt was moving 3 or four inches, just watch the name josh and you will see what I am talking about.
It's a sweet setup no doubt. But don't say it's doing what it's not to make your dong feel bigger. Trust me, I know what its like to pour everything into something and it not turn out like expected. I'm sure you will get what you want out of it with more time.

NoLoud4U
06-19-2012, 10:50 PM
sorry that was based off of a goofy song, I played a 50hz tone and it hurt if that means anything...

My tweeters hurt:)

NoLoud4U
06-19-2012, 10:53 PM
And didn't you say you had tire flex a few days back?

RangerDangerV2
06-19-2012, 10:55 PM
And didn't you say you had tire flex a few days back?

front tires vibrate yes. so do the doors and the back window and the windshield and the hood and the roof.

---------- Post added at 09:55 PM ---------- Previous post was at 09:55 PM ----------


It's a sweet setup no doubt. But don't say it's doing what it's not to make your dong feel bigger. Trust me, I know what its like to pour everything into something and it not turn out like expected. I'm sure you will get what you want out of it with more time.

like I said Ill, get back to you.

RangerDangerV2
06-19-2012, 10:58 PM
DCtC... dude im not mad at what you are saying I am just frustrated that you are saying things about my equipment when you have never even been around my truck... it does a hair trick... not a massive end all be all of hair tricks but there is movement of hair...

kushy_dreams
06-20-2012, 12:04 AM
geez give the kid a break whats the big deal

kushy_dreams
06-20-2012, 12:05 AM
geez give the kid a break whats the big deal

RangerDangerV2
06-20-2012, 12:09 AM
geez give the kid a break whats the big deal

idk man... I was super excited about this build and it took me about 8 months to acquire all of this equipment and knowledge and now people are hatin on it.... haters gonna hate... yall just need to wait till i get my four ns 15s walled in the danger ranger off of 10k. haters gonna hate.

splwj47
06-20-2012, 12:32 AM
idk man... I was super excited about this build and it took me about 8 months to acquire all of this equipment and knowledge and now people are hatin on it.... haters gonna hate... yall just need to wait till i get my four ns 15s walled in the danger ranger off of 10k. haters gonna hate.

stick with atomic bro

RangerDangerV2
06-20-2012, 12:50 AM
stick with atomic bro
why?

splwj47
06-20-2012, 01:26 AM
why?

everyone runs sundown, be a little original. dont be a wagon jumper.

RangerDangerV2
06-20-2012, 01:31 AM
everyone runs sundown, be a little original. dont be a wagon jumper.

I was just thinking nightshades because they like small boxes... but.. I am going to wall off the ranger with 2 apxx 18s next spring/summer... on 10k

RangerDangerV2
07-05-2012, 03:54 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG113.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG112.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG111.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG109.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG108.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG107.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG106.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG105.jpg

SourDeez
07-05-2012, 03:57 PM
I wouldn't even ash my blunt in that car

RangerDangerV2
07-05-2012, 04:04 PM
thanks bruh

RangerDangerV2
07-29-2012, 10:39 PM
new plans bishes. 153 here I come. updates when errthang comes together... need to get the monies from selling all of my old equipment first...

RangerDangerV2
08-07-2012, 09:42 AM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG134.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG128.jpg
hmm... what could I be doing that I would need to line my truck with 2x4s???

mazdakid
08-07-2012, 09:49 AM
why is 153 your goal now?
what were you at before?

RangerDangerV2
08-07-2012, 09:52 AM
why is 153 your goal now?
what were you at before?

thats what I need to show somebody whats up.... but with what my new plans are my team and I are hoping for a 55... then later on i will be upgrading power and we will see what will happen...

RangerDangerV2
08-07-2012, 10:37 AM
so the plan now is 4 dc lvl 4 15s walled on my 3500... later on Im going with lvl5s and a dc 10k... I would like to see a 57 on music out of that setup... but we will see once its all said and done.

pro-rabbit
08-07-2012, 10:46 AM
57's might be a bit much to ask to be honest. There is more to it then just cramming subs and power in the truck to get numbers.

I would venture to say using cheaper subs and less power would get you more knowledge on how much effeciency plays a huge roll as does tuning and small things like seat position, visor position..glove box....seat belts...stock or aftermarket steering wheel....I have had window tint affect my score before lol

RangerDangerV2
08-07-2012, 10:56 AM
first off... I am not designing the wall. and I get the lvl4s for 200 a piece, cheap enough for me. and I only have the single 3500 right now. late on I WILL be upgrading.

RangerDangerV2
08-07-2012, 10:59 AM
57's might be a bit much to ask to be honest. There is more to it then just cramming subs and power in the truck to get numbers.

I would venture to say using cheaper subs and less power would get you more knowledge on how much effeciency plays a huge roll as does tuning and small things like seat position, visor position..glove box....seat belts...stock or aftermarket steering wheel....I have had window tint affect my score before lol
and I think it is quite hilarious that you automatically think that I dont know any of this... just because Im 17 doesnt mean that I dont know anything.

Serpent710
08-07-2012, 11:04 AM
and I think it is quite hilarious that you automatically think that I dont know any of this... just because Im 17 doesnt mean that I dont know anything.

he was giving his opinion and stating facts from experience... be appreciative, just cause you "know everything" doesen't mean other people do

RangerDangerV2
08-07-2012, 11:08 AM
he was giving his opinion and stating facts from experience... be appreciative, just cause you "know everything" doesen't mean other people do
how about you just shut the fvck up??

dbeez
08-07-2012, 11:08 AM
Your gonna learn the hard way as my buddy has you have a lot more to learn grasshopper

RangerDangerV2
08-07-2012, 11:09 AM
Your gonna learn the hard way as my buddy has you have a lot more to learn grasshopper

im not designing the wall...

Serpent710
08-07-2012, 11:16 AM
how about you just shut the fvck up??

:respekt: design the wall yourself since you know it all brah

dbeez
08-07-2012, 11:16 AM
im not designing the wall...

Doesn't matter best of luck though I really for you hit that 57 first burp but I see a 54-55 coming for a while.

RangerDangerV2
08-07-2012, 11:20 AM
Doesn't matter best of luck though I really for you hit that 57 first burp but I see a 54-55 coming for a while.

I think burping a 57 on 10k is very possible... I think with just my 3500 I can be doing 53ish on music... but its not being built for numbers, just a demo machine.

dbeez
08-07-2012, 11:25 AM
My buddy burped his first ever 56 2 weeks ago and he has mire power and stronger motored subs than you will.

xSPLoder
08-07-2012, 11:26 AM
57's might be a bit much to ask to be honest. There is more to it then just cramming subs and power in the truck to get numbers.

I would venture to say using cheaper subs and less power would get you more knowledge on how much effeciency plays a huge roll as does tuning and small things like seat position, visor position..glove box....seat belts...stock or aftermarket steering wheel....I have had window tint affect my score before lol

Cavities FTW! My center counsel up gains 1/10db for real

xSPLoder
08-07-2012, 11:27 AM
so the plan now is 4 dc lvl 4 15s walled on my 3500... later on Im going with lvl5s and a dc 10k... I would like to see a 57 on music out of that setup... but we will see once its all said and done.

Have fun with the 57 bro. Not hating on you but I call the subs blow before reaching a 50. That's just DC subs for ya

pro-rabbit
08-07-2012, 11:41 AM
and I think it is quite hilarious that you automatically think that I dont know any of this... just because Im 17 doesnt mean that I dont know anything.

I think it is funny you take offense to it. Perhaps you are the best of all and need no help because the planets will simply align for you, I'm sorry I will simply bow out from offering truthful advice that if applied will help you more then posting on this forum will.



On a side note..can we make a betting pool on the numbers he will do? I know what I got my money on. I see a 151-152 on the current power and no more then a 153-154 with his max power...

Those are burps not music.

wickedwitt
08-07-2012, 11:51 AM
I think it is funny you take offense to it. Perhaps you are the best of all and need no help because the planets will simply align for you, I'm sorry I will simply bow out from offering truthful advice that if applied will help you more then posting on this forum will.



On a side note..can we make a betting pool on the numbers he will do? I know what I got my money on. I see a 151-152 on the current power and no more then a 153-154 with his max power...

Those are burps not music.
I tried joking with the guy earlier in another thread and he jumped all over it. Typical teenager behaviour, seeing everything as a threat. I sure hope this does better than a 151 in such a small cab, but never know.

Serpent710
08-07-2012, 11:52 AM
I tried joking with the guy earlier in another thread and he jumped all over it. Typical teenager behaviour, seeing everything as a threat. I sure hope this does better than a 151 in such a small cab, but never know.

cant give advice to someone who knows it all lol

pro-rabbit
08-07-2012, 11:57 AM
I tried joking with the guy earlier in another thread and he jumped all over it. Typical teenager behaviour, seeing everything as a threat. I sure hope this does better than a 151 in such a small cab, but never know.

Small cabs can make walls difficult to work with some times. Not only that but he is limited in volume as well and mounting area for subs/port so it would be interesting to see how the design comes out and what all they do for the wall in general. I hope for his ego sake he is louder, but unless he has a supper secret friend that builds word record trucks building it I don't see it happening. Maybe after a few rebuilds or so..... geting past that low 150 mark is a pita for some people..getting past 155 is even worse for almost everyone.

This kid had a thread before that was just ripped apart for his words and claims and ever since then he has been a typical kid. Not sure what else to say really.

There is a reason that not everyone is loud wall or not.

wickedwitt
08-07-2012, 12:02 PM
Small cabs can make walls difficult to work with some times. Not only that but he is limited in volume as well and mounting area for subs/port so it would be interesting to see how the design comes out and what all they do for the wall in general. I hope for his ego sake he is louder, but unless he has a supper secret friend that builds word record trucks building it I don't see it happening. Maybe after a few rebuilds or so..... geting past that low 150 mark is a pita for some people..getting past 155 is even worse for almost everyone.

This kid had a thread before that was just ripped apart for his words and claims and ever since then he has been a typical kid. Not sure what else to say really.

There is a reason that not everyone is loud wall or not.

Definitely agree, but from the first pics it looks like he had room to build what most consider an ample box for 1 18. I was merely stating there was not much cabin to pressurize and according to his statements, he's going above and beyond with strengthening the cabin. Numbers are fickle and you are right, not everyone can get what they want out of a build. It just really ***** for people who have a few things going for them but still can't get decent numbers; then there are people who know their way around enclosures that can make a terrible set of variables still put up a good number.

To be honest, the best thing that can happen to him is to get terrible numbers so his ego dies off and he realizes there is much to learn in this industry. It is better in the long run for someone to learn this early in their career instead of being lucky and getting numbers out of that first big build. My truck is insanely loud, but puts up terrible numbers. I learned that day that competing was not in the books for me, and I would rather build demo/daily machines from there out. Best thing that ever happened to me for CA. I learned that I did not know everything there was to know about this game and started using my ears more and mouth less when around people that knew what they were talking about.

Serpent710
08-07-2012, 12:02 PM
Small cabs can make walls difficult to work with some times. Not only that but he is limited in volume as well and mounting area for subs/port so it would be interesting to see how the design comes out and what all they do for the wall in general. I hope for his ego sake he is louder, but unless he has a supper secret friend that builds word record trucks building it I don't see it happening. Maybe after a few rebuilds or so..... geting past that low 150 mark is a pita for some people..getting past 155 is even worse for almost everyone.

This kid had a thread before that was just ripped apart for his words and claims and ever since then he has been a typical kid. Not sure what else to say really.

There is a reason that not everyone is loud wall or not.

This, tried to ruin my reputation. therefore all respect is lost

RangerDangerV2
08-07-2012, 02:41 PM
lol... this has been fun... truth is im actually downsizing to 2 sa8's... lol i I thought I might troll a little after my week long ban... its all good guys. @pro-rabbit I respect your opinions very much and I hope that you didnt take too much offense to my trollin....

wickedwitt
08-07-2012, 02:43 PM
lol... this has been fun... truth is im actually downsizing to 2 sa8's... lol i I thought I might troll a little after my week long ban... its all good guys. @pro-rabbit I respect your opinions very much and I hope that you didnt take too much offense to my trollin....
http://i0.kym-cdn.com/entries/icons/original/000/000/554/facepalm.jpg

Hope you enjoy the small build. Probably catch some people off guard.

RangerDangerV2
08-07-2012, 02:45 PM
http://i0.kym-cdn.com/entries/icons/original/000/000/554/facepalm.jpg

Hope you enjoy the small build. Probably catch some people off guard.

actually I had an sa8 before... it was in 1.2 cu ft tuned to 28hz and I really enjoyed it... I think I may go with 1.5cu ft net total and see how that goes. tuning low. I moved the batts and amp back to make room for the bench it the back. thats what the 2x4s are for... its a bench that also serves as a bed.

xSPLoder
08-07-2012, 02:53 PM
lol... this has been fun... truth is im actually downsizing to 2 sa8's... lol i I thought I might troll a little after my week long ban... its all good guys. @pro-rabbit I respect your opinions very much and I hope that you didnt take too much offense to my trollin....

https://encrypted-tbn2.google.com/images?q=tbn:ANd9GcR7s8c_BwuHZYzQIny2858HZdPNTXDuE hffH_wGFXUOOEhaIQRUPQ

RangerDangerV2
08-07-2012, 02:55 PM
https://encrypted-tbn2.google.com/images?q=tbn:ANd9GcR7s8c_BwuHZYzQIny2858HZdPNTXDuE hffH_wGFXUOOEhaIQRUPQ
where on earth am I going to get brand new lvl 4s for 200 a piece?? come on seriously?

xSPLoder
08-07-2012, 02:59 PM
scrap yard?

RangerDangerV2
08-07-2012, 03:02 PM
scrap yard?

nah... thats where kickers come from bro. but honestly Im looking for a good balanced sql system... Im looking into selenium for my front stage... opinions?

pro-rabbit
08-07-2012, 03:07 PM
I think seleniums would be to harsh. When going for a good mix of SQ and loud don't use PA products.

wickedwitt
08-07-2012, 03:08 PM
nah... thats where kickers come from bro. but honestly Im looking for a good balanced sql system... Im looking into selenium for my front stage... opinions?
I'd put my scrap yard subs up against a lv 4 any day...

RangerDangerV2
08-07-2012, 03:09 PM
I think seleniums would be to harsh. When going for a good mix of SQ and loud don't use PA products.

hmm... what would you recommend? I dont want to break the bank but I would like a nice smooth and warm sounding front stage...

RangerDangerV2
08-07-2012, 03:11 PM
I'd put my scrap yard subs up against a lv 4 any day...

and I would put my atomic up against a solo x any day as well. actually... it is no longer mine so nevermind. I like lvl 4s though. my team owner has 4 lvl4 18 m1s and they get down.. he has them in a 4th order and hes doing 155@20 something.... so they get down. and they are on 2 3.5ks strapped... sometimes they get a little smelly but they are m1s...

pro-rabbit
08-07-2012, 03:11 PM
hmm... what would you recommend? I dont want to break the bank but I would like a nice smooth and warm sounding front stage...

I would stick with components. Focus more on going active with a good EQ/Processor. It is not always about spending a ton of money on high end product. It is more about spending money in the right areas.

wickedwitt
08-07-2012, 03:12 PM
Atomic's are efficient, one of the most efficient woofers I've ever seen. They just don't get down for a daily sub though. Not for my liking at least.

Oh well, I'm moving to something that should walk over all of them.

RangerDangerV2
08-07-2012, 03:13 PM
I would stick with components. Focus more on going active with a good EQ/Processor. It is not always about spending a ton of money on high end product. It is more about spending money in the right areas.

I see... I think I may upgrade the hu as well...

RangerDangerV2
08-07-2012, 03:14 PM
Atomic's are efficient, one of the most efficient woofers I've ever seen. They just don't get down for a daily sub though. Not for my liking at least.

Oh well, I'm moving to something that should walk over all of them.

I liked mine for daily... I just had box issues.. I think if I ever did wall a vehicle I would go with their ELE series... good dailys from what I have heard. and they can get loud.

skylineTT
08-07-2012, 03:21 PM
last 2 pages. dafuqz

xSPLoder
08-07-2012, 03:31 PM
nah... thats where kickers come from bro. but honestly Im looking for a good balanced sql system... Im looking into selenium for my front stage... opinions?

i just picked up a new pair of american bass 5.25's to give them a try. I've hear them before with a super bullet tweeter and they sound crisp and ear piercing lol im going to built custom mdf rings for them but want to keep them hidden still in my explorer that naturally takes 5x7's or 6x8's. You should look into them. they are good for the price too

dbeez
08-07-2012, 03:47 PM
i just picked up a new pair of american bass 5.25's to give them a try. I've hear them before with a super bullet tweeter and they sound crisp and ear piercing lol im going to built custom mdf rings for them but want to keep them hidden still in my explorer that naturally takes 5x7's or 6x8's. You should look into them. they are good for the price too

The ab sq speakers have zero and I mean zero midbass I didn't like that at all.

xSPLoder
08-07-2012, 03:54 PM
The ab sq speakers have zero and I mean zero midbass I didn't like that at all.

american bass also makes a mid ranged bullet speaker too in 6.5 that's geared towards midbass

pro-rabbit
08-07-2012, 03:56 PM
american bass also makes a mid ranged bullet speaker too in 6.5 that's geared towards midbass

SQ and PA products do not work together.

NoLoud4U
08-07-2012, 03:58 PM
SQ and PA products do not work together.

Agreed

xSPLoder
08-07-2012, 04:04 PM
SQ and PA products do not work together.

ahh, as you can tell im no SQ guy. LOL im just adding those things I mentioned to be able to hear the words to songs again along with heavy bass hahaha. Well ranger, no suggestions from me then. Good luck

pro-rabbit
08-07-2012, 04:05 PM
PA speakers are great for getting loud that is for sure.

RangerDangerV2
08-07-2012, 04:13 PM
hmm... Im looking at I.D. and cdt.. they both seem promising.

RangerDangerV2
08-07-2012, 04:16 PM
now that I think about it... maybe I should wall the ranger...:rolleyes: I think a 53 ish on music would be possible... Ive seen 151 with 2 zv1s and a 3500. in the same truck.

mazdakid
08-07-2012, 04:22 PM
where on earth am I going to get brand new lvl 4s for 200 a piece?? come on seriously?

got one from rusty for 180 about 2 years ago. junk subs
not brand new but used motor and brand new recone.

RangerDangerV2
08-07-2012, 04:24 PM
got one from rusty for 180 about 2 years ago. junk subs

I like them.

RangerDangerV2
08-07-2012, 04:38 PM
ok ok... I am walling the ranger... but instead of the lvl4s im looking into atomic apocalypse 15s... 1500 rms.. they can build them with a softer suspension. for now they will all be on my 3500... I would like to see a 53 on music but I need to see my wall design before I can give out any guesses. but it is going to be built strictly for demos, tuned low. I am adding a stripper pole and mad bracing just to be on the safe side.... opinions?

RangerDangerV2
08-08-2012, 08:58 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG134.jpg

mazdakid
08-08-2012, 09:06 PM
good luck.
im ready to go big and get out of a trunk again.

RangerDangerV2
08-08-2012, 09:08 PM
good luck.
im ready to go big and get out of a trunk again.

thanks. its not going to be too big of a build but I think it will be a nice demo machine.

sleazebagger
08-10-2012, 09:38 AM
Nice work man, looking forward to the next stage.

RangerDangerV2
08-13-2012, 11:57 AM
http://i.imgur.com/oYgts.png
12.4 cu ft tuned to 34 with 192sq inches of port.

RangerDangerV2
08-13-2012, 12:10 PM
forgot to add... designed by pro-rabbit ;

sleazebagger
08-13-2012, 12:15 PM
http://i.imgur.com/oYgts.png
12.4 cu ft tuned to 34 with 192sq inches of port.

nice...

thats about what I need:)

RangerDangerV2
08-13-2012, 12:17 PM
it should get stupid low...

RangerDangerV2
08-21-2012, 08:48 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG144.jpg
http://i1161.photobucket.com/albums/q513/bumpin101/IMG143.jpg

NoLoud4U
08-21-2012, 09:12 PM
Why are you putting them so far back?

RangerDangerV2
08-21-2012, 09:18 PM
Why are you putting them so far back?

because I have to sit almost all the way forward. I would put them more towards the front but my knee is hitting the optimal part of the door...

RangerDangerV2
08-21-2012, 09:30 PM
so I know that putting my mids there is going to mess with sound imaging and what not... but there is a space issue that I have to deal with and I already explained that... but the good part is that I demo with either one or both doors open... being that its a small truck it has massive gains when a door is open... (my old setup gained 4dbs just from opening the door, and that was 4 dbs going from the window open to the door open...) well will see how it works though. worst case scenario, I hate it, rip it out, and put the stock panels back in.

NoLoud4U
08-21-2012, 09:43 PM
because I have to sit almost all the way forward. I would put them more towards the front but my knee is hitting the optimal part of the door...

You seem to have some skills, putem in the kick or something

RangerDangerV2
08-21-2012, 09:47 PM
You seem to have some skills, putem in the kick or something

I would if I have room.... thats the only bad part of sitting so far forward. its not uncomfortable because I normally sit like that but the problem is my long azz legs get in the way lol. I dont think it will be too bad because they are right at my side... i will be putting tweets in front of me somewhere I just dont know exactly where yet. the good thing is, all of it is removeable and I can change the positioning to my liking, as long as the space permits lmao

RangerDangerV2
08-21-2012, 09:54 PM
oh yeah... this is my final design of my wall. 12.xxx cu ft tuned to 34.xxxhz... for 2 AA chaos 18s on 4k. I may pull the baffle out in the future and throw 10 10's in there... thats later on though.
http://i1161.photobucket.com/albums/q513/bumpin101/wall.png

NoLoud4U
08-21-2012, 10:08 PM
I would if I have room.... thats the only bad part of sitting so far forward. its not uncomfortable because I normally sit like that but the problem is my long azz legs get in the way lol. I dont think it will be too bad because they are right at my side... i will be putting tweets in front of me somewhere I just dont know exactly where yet. the good thing is, all of it is removeable and I can change the positioning to my liking, as long as the space permits lmao

Be careful with mid tweeter separation. You might need to add a small mid range close to the tweeter. In the pillar or something.

RangerDangerV2
08-21-2012, 10:10 PM
Be careful with mid tweeter separation. You might need to add a small mid range close to the tweeter. In the pillar or something.

thanks for the help! ive never built a front stage before... but like I said im going to do some experimenting to see what I want. I may put a super tweet right in there with the mids... sq and imaging isnt really a big deal for me being that my lower frequencies cover up my mids and highs... if you catch my drift lol.

RangerDangerV2
08-24-2012, 03:04 PM
well if some of you were wondering why I havent started building... its because money is hella tight this month. next month I will start and hopefully finish by the end of sep. good thing school is starting because I have access to panel saws and large table saws. Im really excited to get this wall going.... but on a lighter note I installed my volt meter in my a pillar. looks pretty seqqsy. I just have to glass around it and wrap the pillars inn vinyl. pics will be posted when done.

pro-rabbit
08-24-2012, 03:18 PM
Is this done yet?



:sneaky:

RangerDangerV2
09-16-2012, 09:43 PM
http://i1161.photobucket.com/albums/q513/bumpin101/IMG149.jpg

RangerDangerV2
09-16-2012, 10:43 PM
nobody kerrs....

04murdalanche
09-18-2012, 02:45 AM
moar!

CAT MAN
09-18-2012, 02:53 AM
gap city bish gap gap city bish

Villeza1
09-18-2012, 03:37 AM
GO GO RANGERDANGER! (Old School Power Ranger's Theme song)

RangerDanger

mlstrass
09-18-2012, 05:05 AM
my doors have the mids back like that and tweets in the A pillars. Sounds good actually, so you should be fine...

Bettr n' Revrse
09-18-2012, 05:58 AM
Mehhhh

Bettr n' Revrse
09-18-2012, 06:03 AM
Why are you even attempting a good sound stage when your walling two 18's?

RangerDangerV2
09-18-2012, 06:01 PM
so I did the third baffle on the sides, closed up the gaps and what not. now I just need a gallon of resin or so and I can do the front baffles. I know that it looks really really ugly now but when it is done it will be very clean.

---------- Post added at 05:01 PM ---------- Previous post was at 05:01 PM ----------


Why are you even attempting a good sound stage when your walling two 18's?

who said good? I just want one that keeps up.

Jerhemy
09-18-2012, 06:29 PM
moar pics please. can't wait to see the end result

kushy_dreams
09-18-2012, 07:06 PM
Are you trying to be like LACRX byt starting a build thread, never finishing it while posting insipid pics along the way?

RangerDangerV2
09-18-2012, 07:33 PM
Are you trying to be like LACRX byt starting a build thread, never finishing it while posting insipid pics along the way?

no, just been really busy lately... thus the lack of me being on here. not too much time to work on the wall either. ill try to get more pics when I have some more done but it may be a little while.

RangerDangerV2
10-03-2012, 11:19 PM
halfway there...
http://i1161.photobucket.com/albums/q513/bumpin101/IMG150.jpg

RangerDangerV2
10-03-2012, 11:35 PM
flame on.

PapaGeno21
10-05-2012, 02:56 PM
That's a big box... **** that's going to pound.

RangerDangerV2
10-15-2012, 09:18 PM
rip the wall out because it was not legal for mwspl. now im working on the enclosure for 4 sa12's. I would give specs but seeing that I'm a competitor now... I must keep my secrets. I will tell you however that it is below the window line and that it is behind the b pillar. excited to see what numbers it will pull sealed up.

CAT MAN
10-15-2012, 10:05 PM
I would give specs but seeing that I'm a competitor now... I must keep my secrets.

Funny thing is. People that are like you and think they are secrets or dont give out tips are the ones in 2nd place.

RangerDangerV2
10-15-2012, 10:12 PM
Funny thing is. People that are like you and think they are secrets or dont give out tips are the ones in 2nd place.

it's going to be my first year so I dont really want to give out much yet...

CAT MAN
10-15-2012, 10:14 PM
well i hate to burst your bubble but at that level i dont think you know any "secrets" along with the fact that every car/truck is different no matter what. but have fun!

RangerDangerV2
10-15-2012, 10:23 PM
well i hate to burst your bubble but at that level i dont think you know any "secrets" along with the fact that every car/truck is different no matter what. but have fun!

you just have no clue tony. like I have said multiple times, you underestimate me quite a bit. You have no clue what I am capable of, who I learn from, or what I know. Heck, how do you even know that my real name is jake?
and yes I do know some secrets for MY vehicle. and as far as me not posting my specs, that is for my own reason and I do not see how they are important at all. I love how you automatically think that you are the master of all that is woofer. to be honest, you are quite a jerk. and go ahead with the obligatory butthurt and u mad bro posts.

CAT MAN
10-15-2012, 10:28 PM
you just have no clue tony. like I have said multiple times, you underestimate me quite a bit. You have no clue what I am capable of, who I learn from, or what I know. Heck, how do you even know that my real name is jake?
and yes I do know some secrets for MY vehicle. and as far as me not posting my specs, that is for my own reason and I do not see how they are important at all. I love how you automatically think that you are the master of all that is woofer. to be honest, you are quite a jerk. and go ahead with the obligatory butthurt and u mad bro posts.
Jake Seifert iirc
i dont care what you know or think you know. There are no secrets. Ive learned from terry,curtis,marcus,BW,singer,sears,ellis(loudest ranger@32hz), tade i can keep going. And want to know something ironic? all their "secrets" were just the same old things. All im doing is point out the obvious. I can care less what people think of me. You guys thinking you know something someone else doesnt and getting butthurt when they call you out.


:wave: later

RangerDangerV2
10-15-2012, 10:32 PM
Jake Seifert iirc
i dont care what you know or think you know. There are no secrets. Ive learned from terry,curtis,marcus,BW,singer,sears,ellis(loudest ranger@32hz), tade i can keep going. And want to know something ironic? all their "secrets" were just the same old things. All im doing is point out the obvious. I can care less what people think of me. You guys thinking you know something someone else doesnt and getting butthurt when they call you out.


:wave: later

too bad anton miller will kill you in any trunk class. because you cant get loud in the trunk at all.

CAT MAN
10-15-2012, 10:33 PM
:crying:
too bad anton miller will kill you in any trunk class. because you cant get loud in the trunk at all.

ill bull a brocks in a second if you are willing to put money down on it.

RangerDangerV2
10-15-2012, 10:36 PM
:crying:

ill bull a brocks in a second if you are willing to put money down on it.

yeah whatever. everyone knows that you got all of your info from anton.

CAT MAN
10-15-2012, 10:38 PM
yeah whatever. everyone knows that you got all of your info from anton.

straight from the spl dust factory :wave:

RangerDangerV2
10-15-2012, 10:41 PM
straight from the spl dust factory :wave:

lol this fake argument was fun tony. we will have to do this again sometime.... :cuddle:

mazdakid
10-15-2012, 10:47 PM
You two noobs done fighting now?

CAT MAN
10-15-2012, 10:47 PM
You two noobs done fighting now?

just pointing things out.

RangerDangerV2
10-15-2012, 10:49 PM
just pointing things out.

booty call later?