PDA

View Full Version : Box Design



malandrin4o8
04-17-2012, 03:44 PM
I need help on a box design. I've done several sealed but none ported. I have a 15" Kicker L7 2008 model year dual 4ohm. powered by a Hifonics Brutus 1200.1 d. It's goin in a 94 Honda Accord sedan. Currently I have a sealed box 32wx16hx16d but it was a pain to put in. so i want a ported box. i have 32Wx14Hx27d to work with. I want a sub up port back type of box. I listen to mostly rap, hip hop and spanish music so idk whats a good tuning frequency. Im willing to pay through paypal. Thanks

Buck
04-17-2012, 05:17 PM
:wave:

I just did a L7 15 in a Charger.

http://i1269.photobucket.com/albums/jj589/buckboxdesigns/12%20Gauge%20Audio%20Designs/12gchargerL715portedxray.png

malandrin4o8
04-17-2012, 05:23 PM
Is it possible do the port horizontal?

Buck
04-17-2012, 05:24 PM
Yes but usually the results aren't quite as well. Depends on how it's done.

malandrin4o8
04-17-2012, 05:29 PM
So would port facing foward be better in my case since if its facing back the port will be directly in front of a metal panel

Buck
04-17-2012, 05:58 PM
You will want it firing rear.

malandrin4o8
04-17-2012, 07:48 PM
Ok, I see you do box designs how would i go about getting one from you?

Buck
04-17-2012, 09:33 PM
You can email me at [email protected] It's in my signature if you can see it.

Kangaroux
04-17-2012, 09:38 PM
Is it possible do the port horizontal?

The only times a horizontal port would be necessary is if you are making a large box that needs a lot of port area (most boxes that are 10+ cubes utilize this)