PDA

View Full Version : Cyn's - - - 007 Impala Build Log...



cyn
04-11-2012, 02:17 AM
Okay... This will get updated as I start putting things into the car this week/weekend. I will atleast get the HU, Massive Components In.. RCA's / Power/Ground Wires in and possibly the Big 3 on this.
I will more than likely throw my old 1.7cu box in with my skar till I get a box designed for my AA 15. And Hopefully I will get some Deadner sometime in the very near future...


some pics below of all said Equipment and some extra stuff I have laying around..

http://db.tt/rUarX1dD

http://db.tt/iEWEsH7c

VisceralSound
04-11-2012, 02:35 AM
Looks good, that Rockford 2 channel I'm guessing the 300.2 is a little power hungry.

cyn
04-11-2012, 02:37 AM
Looks good, that Rockford 2 channel I'm guessing the 300.2 is a little power hungry.

actually its a 300.1 and does put out some power over 300 for sure and eats some power for what it is

VisceralSound
04-11-2012, 02:42 AM
actually its a 300.1 and does put out some power over 300 for sure and eats some power for what it is

Oh okay, yeah I borrow a friends ****** P300.2 and for what it did for a 300watt for my type r it rocked it but again like said it did **** a butt ton of power, and what also ****** was its an 8gauge input and I had 4gauge.

glwb

ek9cv5
04-11-2012, 02:07 PM
Nice equipment

Falcons
04-11-2012, 02:10 PM
lets go! get some more pics up!!!!

cyn
04-11-2012, 02:19 PM
Im out of town atm.. Will get some of the inside of the car sometime before i start installing tho.. Waiting on my install kit yo come in also for my hu and all my wiring harnesses.. and box design from RAM_Designs

cyn
04-12-2012, 08:53 PM
Okay... Another pic.. Just of the Stock HU as of now...
http://db.tt/t2kE4WtV

I'm still waiting on the Install Kits to come in... Should be monday or tuesday... Box Design to be finished for the AA 15",

What I'm planning on running when I start:
HU: Clarion CZ500
Sub: Ascendant Arsenal 15" 05 model
Amp: SoundStream DTR 1700.1 at 2ohms roughly 900-1100 watts / or US Acoustics USX800F at 8ohms roughly 600-700watts
Front Stage: Massive Audio SK6
Front Stage Amp: HU for now till I decide if i'm upgrading or not. or I might run the Eclipse 3640
Rear Stage: Stock : its rear stage
Box: 3.5cubes tuned to around 32hz unless it changes some depending on what Ram_Designs does
Stinger lvl3 RCA's for Sub - Front Stage
1/0 Welding cable for big 3 / battery to distro / distro to amps 4g / 8g

jmax313
04-13-2012, 07:17 AM
Nice!!

cyn
04-19-2012, 08:50 PM
http://db.tt/CfjVHVpx

http://db.tt/L489HTPT

cyn
04-19-2012, 10:06 PM
Here is the Clarion CZ500 HU... which will end up being for sale shortly after I get the CX501

would also like to thank Mylows for getting me some good discounts on everything so far.
http://db.tt/eX1gNtQP

cyn
04-23-2012, 08:41 PM
Okay, A little update... I have my wires ran 1/0 from battery to back, 1/0 ground.. I forgot to take pictures when I was doing this "was rushing to get it all in and slipped my mind.. I will be deadening everything so I will take some pictures when I do that. I have the Skar 12" in my old 1.7 cubes net box on a USX800F right now. Will be doing a box for my AA 15" 05 this weekend I hope anyway. I will also post the build of that. But for now, 2 lil goodies I got this weekend and today

http://db.tt/ZP7Or18F

http://db.tt/5GFFnqH7

http://db.tt/zLVlMy1u

cyn
05-03-2012, 11:56 PM
well things are going a little slower than I thought they would lol... I have my deadner in from Audio Technix.. 50sq ft.. Will be doing my trunk and front doors with this. adding in my CDT comps... finally getting around to building my box for my AA 05 15"... and doing my big 3 upgrade this weekend... If i have enough time i'm going to also run some new wire also for power and ground going to run everything from the front battery to the rear. will be doing 1/0 G flexaprene ftmfw.. Will be getting some 4G flexaprene also to run off distro blocks to my amps.. and a few feet of 8G for my component amp.. When I get my 2nd skar in, in a week or so I will be doing another box build for 2 skar vvx 12"s... when I do this box I will also be doing some upgrades in the trunk... 3 way false floor.. amp racks into the fender walls.. everything will be done out of 1/4" japanese maple.. extreamly lightweight I think the 4'x8' sheet weighed like 12lbs... I'm not sure if I will be doing a stain and clear on it or doing a carpet finish yet... The 3 way false floor will be designed to fit snuggly against the box with the tirewell opening accessable with a removable snap plat.. or I might just make it a drop in and do a 2" ring under the false floor so it fits flush... My box for the 2 skar vvx 12"s will be either done in Birch 3/4" its 44$ a 4x8 sheet here... or white oak / japanese maple all the sheets are the same price.... anyone have any experiance with the white oak or japanese maple doing boxes?

also when I do the build for the skars I will be lining the trunk floor and sides with 1/8" Neoprene... incase you don't know what neoprene can be used for google it..

cyn
05-06-2012, 02:55 AM
Okay... a little update started building my box. Box Design was provided to me by RAM_Designs. I was going to Use Birch but every place around here was out of the stuff, 3 days ago everyone had it. So I went with a Japanese Maple, I'm liking the look of the grain and how much lighter it is overall. I would say this is about 20% lighter than Birch. " I picked up a sheet at the store so I know this is lighter". I will keep updating as I go finish up the box. It will take me the rest of the week to get it done. I still have to cut my 45's, Sand It down after I'm done with the Outside except for the top plate, Stain It then Seal it.

http://db.tt/55OFTZCn

http://db.tt/rtJHRmms

RAM_Designs
05-06-2012, 09:32 AM
What kind of stain are you using?

cyn
05-06-2012, 11:56 AM
What kind of stain are you using?

I haven't bought the Stain yet, will be something from Home Depot or Lowes as far as brand wise.. Colour I will be doing an Ebony Stain "maybe" I will do the inside of the box to see how it turns out tho, will also being a couple layers of seal

cyn
05-07-2012, 10:38 PM
Okay,... here is a few more pics from the box build log.. yeah I know its dragging way the hell out lol... think I did about 5mins yesterday and 5mins today long enough to put up one side and the front when I got home from work today.. Tomorrow I will try to get the 45"s cut and get the port in..

http://db.tt/DraGMapp
front of the box


http://db.tt/xyoGXELK
view of the port mouth


http://db.tt/SAQagmx4
a little shot of the inside corner.. nice and square.. I will get some nice close ups of the smoothed out corners sometime tomorrow or something

cyn
05-08-2012, 11:19 PM
Okay, got 2 of the 45"s cut out just need to get some more sandpaper tomorrow some 60-80 grit to round the back out and cut the other 2 out then get them in tomorrow and get the port in tomorrow and let all of that dry.. The top plate will be sealed with rope caulk and screws.. no wood glue I want it removable incase I want to adjust anything or whatever later on...

MrKc913
08-07-2012, 09:30 PM
Nice.... How did it turn out? I have an 07 impala that im trying to get everything so I can hook my toys up.

cyn
09-04-2012, 03:53 AM
Nice.... How did it turn out? I have an 07 impala that im trying to get everything so I can hook my toys up.

Well I finished the box out for the 15" AA a while back... blew the sub.. Redoing my install this month..

Going with a Quasi 6th order for an RE HC 2002 12" Sub, Will be ported through the Rear deck.. I've put deadner on the front Doors, Truck Floor and Trunk Lid.

So the new install that I will be working on will be as follows:
Deaden up the Rear Deck, cut out the port hole for the Box.. Re-run all of my wires from the front to rear separated from each side. Power and ground on the passenger side. All RCA and Speaker wires in the middle and Drive Side, RCA's in the Middle, Wires on the Driver side. Finishing out the Front Doors with the CDT Comps. Making an Amp Rack in the Trunk to put the amps out of the way and route wiring better. Redo my Ground with a Nice Distro Box.. Making a Complete floor with a removable Tire Well hole. Hopefully all out of 1/4" Birch... Same as the Amp Rack but it will be 1/2" recessed into the Wells.. Will be doing more deadner on the trunk floor and lid and the rear bumper"inside the liner of the bumper" This will be a long process as work has taken up a lot of my time lately. But I will update with new pictures sometime this week of the deadening that I have done.. Also I will be getting all of my Stock Electrical Wiring for the Battery and main box wires changed out and upgraded along with the Big 3 before adding in my front stage Amp... Depending on Voltage drops after the Big 3 and the other upgrades to the stock electrical wires i'll Add another battery in the trunk on the other side in the Well.. After all of this is done, I plan on redoing the Rear Deck cover completely. Fiberglass cover with new pods for either 5.25 or 6" comps, also doing a molded out port entrance for the sub.. I'll see how that goes when I get to that point..

Depending on how long this takes and if I follow through with it all this will stay in for a while... Box might change later on depending on what setup I go with.. If this stays for 6months I'll be happy with it.. Also depending on me getting another SUV for doing a huge build this will completely change to a basic setup with a smaller box.. fully clean hidden install.

cyn
09-23-2012, 01:42 AM
Okay so I did A little work today on the build.. getting ready for a few new things to go in.. I rerouted my wires and put in some new rca's and ran all my front stage speaker wires... Amps to be used will be the Same AQ1200.1 on the substage... Zapco 360.2 for my front stage - which I will be starting on tomorrow getting the speakers in but not completely hooked up but everything in place to just hookup wires and be good to go... now some pics for the update

cyn
09-23-2012, 01:54 AM
BT100 I gots on the cheapers.. rests at 12.77
http://db.tt/lXRFdLMq
http://db.tt/MvwQRWIK

Seats and Carpet pulled out forgot to take pics of the dis-assembly, but on to the metal pics and rerouting pics... before comments on box.. yes I know it was a thrown together 10min box... 1.7cube net @32hz.. about 2 years old..
http://db.tt/O6qWklpT
http://db.tt/406bWnk9
http://db.tt/241heUNc[COLOR="Silver"]

cyn
09-23-2012, 02:08 AM
http://db.tt/29mxhoRu

Started routing some of the wires here...
http://db.tt/5e4viUhh
http://db.tt/wthdFF6y

cyn
09-23-2012, 02:08 AM
http://db.tt/PVnYEoA8
http://db.tt/rgAJYzGz
http://db.tt/Dstf1AlZ

Front Stage wires all routed down the driver side of the car... Rca's / remote down the middle ... Power Wire down the Passenger side..
http://db.tt/hVOqdQ3g
http://db.tt/ol8whmDr
http://db.tt/iwk64LHB
http://db.tt/p6WfpTQL
http://db.tt/lH3OMWoe
http://db.tt/sp7zmngB
Deadned the Front half of the car for now ran out of deadner... will finish when I get more and add another layer along with some other stuff over the top of it..
http://db.tt/3nToreec

cyn
09-23-2012, 02:31 AM
http://db.tt/IZ0FwP0e
http://db.tt/4CSFrF6x
http://db.tt/oKhiv7Z2
http://db.tt/SqpaRHy1
http://db.tt/D46nxioQ
http://db.tt/bK8DJ9xz
http://db.tt/DfodipNU
http://db.tt/A2Z7RO0s
http://db.tt/FUgcNkqK
http://db.tt/bD5K1qzX

cyn
09-23-2012, 02:32 AM
http://db.tt/IZ0FwP0e
http://db.tt/4CSFrF6x
http://db.tt/oKhiv7Z2
http://db.tt/SqpaRHy1
http://db.tt/D46nxioQ
http://db.tt/bK8DJ9xz
http://db.tt/DfodipNU
http://db.tt/A2Z7RO0s
http://db.tt/FUgcNkqK
http://db.tt/bD5K1qzX

freakin_rican
09-23-2012, 12:42 PM
:) its looking great so far...need to do the same for my impala...lol

audiobaun
09-23-2012, 02:42 PM
Looking really good man..Im here to tell you,,that thats alot of time taken to do, but well worth it later on for the deaedning,I still need to take my front seats out and finish,just waiting on my arm to heal a bit more/get more strength from my surgery,.How do you like the Clarion HU?I hate mine..lol I have the 300 installed in my CRV atm ,hopefully swapping soon.Maybe that 500 is much better.Ill be going with the Kenwood 396 soon

cyn
09-23-2012, 11:33 PM
Looking really good man..Im here to tell you,,that thats alot of time taken to do, but well worth it later on for the deaedning,I still need to take my front seats out and finish,just waiting on my arm to heal a bit more/get more strength from my surgery,.How do you like the Clarion HU?I hate mine..lol I have the 300 installed in my CRV atm ,hopefully swapping soon.Maybe that 500 is much better.Ill be going with the Kenwood 396 soon

Lots of time but very well worth it.. want to do onr more layer and then some mlv.. got my cdt mids in today freaking big time notice in sound.. thought i had my sub on still... got more pics to upload later.. i like the hu alot.. got a eclipse 5350r i want to try out

cyn
09-24-2012, 01:21 AM
okay... So today I worked on making some spacers for the doors and getting in the CDT Comps... Wasn't able to put in the tweeters yet, as I will have to modify the sail to get them in correctly.. But I did get the Mid's in and hooked up to the Zapco 350.2 ... These things freaking bang... I really know why Front Stage is so critical in a system unless you going all out SPL... Future Plans for the doors are already in the works... Going to redo the spacers, cleaner and a better seal all the way around the door and close up all holes that I can over the deadner... and line the inside of the bottom of the door with fiberglass and more deadner and maybe some very lightweight MLV.. I would like try to do some full on pods and get the bass out of the door itself and straight from the pods.. Anyway here is a few pics I have from todays lil adventure..

cyn
09-24-2012, 01:29 AM
http://db.tt/TtxpDmdW
http://db.tt/g5TAbYoD
was going to do a double layered spacer system but I didn't have the clearance so I had to drop it back to a single spacer.. I will be redoing these with a 1" spacer in the future and get a better seal on the door and doing a few other things to the door.
http://db.tt/erjpaGzD
amps in on a temp rack for now.. Zapco 360.2 / AQ 1200.1 , will be doing a 2" lifted angled rack with 1/2" shock absorbant spacers in the next few weeks.. These racks will go into the rear fender well somehow.. Will also be putting a 1/4" plexi sheet speaker guard in soon.. will be 4-5" away from the sub with 1" slots in it and frosted..
http://db.tt/62445d6O

cyn
09-24-2012, 10:59 AM
Well, this morning I was playing around with some settings and so forth on the HU and Amp for the Front Stage, I'm thinking the Zapco might be a little too much for the mid's until I can get the Tweeters in to breakup some of the wattage going to them. Gains are completely down on the Amp, HU Settings on Mids are 2500khz , -4 .. Highs 10,000khz , +4 .. Sub 160hz , -6 .. Sounds about perfect on them but still getting A little over drive on them every once in a while. Over all I am very pleased with the mid range I have now.. I think after I finish the doors up the way I want to I will get a better response out of them that will pick up a few area's that have a slight issue. I know once I put the new tweets in it will give a much needed Higher Freq. response that I am missing still since I am using the Stock Tweets until I have the time to modify the Sail to get them in.

Plans for this week.. Get the Re HC out and sent to Hispl for an upgrade , going from the 12" to a 15" .. Depending on my work schedule and so forth as to how much Time I will be out of town this week I will start messing with the Sails.. Tomorrow I'll be in Arkansas for the day so I know I will not be working on them today or tomorrow or even Wed... and this weekend well I'll be busy with GF so It might be another 2-3 weeks before I can get them done..

Future Plans.. Remove the Rear stage completely from the rear deck.. Buy some door panels for all 4 doors to modify and chop up so I'll have a factory set still.. Make some closed pods on the front doors for the front stage, Add my Rear Stage to the rear doors instead of the Rear Deck.. Get about 100-150sq ft more of Deadner and 50Sq ft of MLV for the cabin. Get some Ensolite for all the doors.. Get new 1/0 AT or KNU power/ground wires to run from the front to rear battery and install the rear battery.. Get the local shop here to make me some Distro's.. "We will see how much of this I actually get done tho"

cyn
09-24-2012, 05:28 PM
keep_hope_alive ; Any tips by looking at the doors on this car as to doing a good seal off for better mid-bass or any suggestions period on anything you see in the install to make it better?

keep_hope_alive
09-25-2012, 01:13 AM
you want to seal off the large holes in the door. those alone will cause the speaker to be unloaded and easily over-driven.

you want foam weatherstripping around the speaker so it seals to the door panel. that stuff is so cheap yet makes such a difference. i'll find a good pic from another member.

keep_hope_alive
09-25-2012, 01:17 AM
http://img407.imageshack.us/img407/654/cdtinstall4.jpg

http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/550533-cdts-2.html

cyn
09-25-2012, 04:01 PM
Any good tips on sealing up them holes good? And ya i ran out of time on doing the seal like that

cyn
12-20-2012, 10:23 PM
http://db.tt/E2r5N0k1
http://db.tt/lUgZzJ7o
http://db.tt/irzotDel

A few things for the new build... Got muh woods cuts... 2 Sheets of Builders Grade Ply.. 2 Custom Built Super Shocker Extreme 12"s ..

mylows10
12-20-2012, 10:43 PM
your amp shipped out today

cyn
12-20-2012, 10:51 PM
your amp shipped out today

Aight man... thanks for letting me know... got a tracking #?

mylows10
12-20-2012, 10:55 PM
Aight man... thanks for letting me know... got a tracking #?

no bob never sends a tracking number ,should be there mon ,maybe sat depends if he ships fedex or ups

cyn
12-20-2012, 11:05 PM
no bob never sends a tracking number ,should be there mon ,maybe sat depends if he ships fedex or ups

aight... Thanks again man..

mylows10
12-20-2012, 11:06 PM
aight... Thanks again man..
no prob

cyn
12-21-2012, 11:39 PM
Update... Box Build...

http://db.tt/0F5gcMUV
http://db.tt/VgJYiiok
http://db.tt/Ptupqq2s
http://db.tt/69r9IoAx
http://db.tt/Olur1Aga
http://db.tt/fEmq6gPJ
http://db.tt/FSxDBCk4
http://db.tt/B4wRduV4
http://db.tt/Jz5eRikC
http://db.tt/YbZmk5EO

I've yet to put on the last end piece, as i'm waiting to get the port in before sealing the side up so I can do some cleaning and touching up with more caulk if needed..

cyn
12-21-2012, 11:42 PM
http://db.tt/RgWwPZDR
http://db.tt/nX4Mancc
http://db.tt/WClMGLGD
http://db.tt/vk8zuiuI
http://db.tt/6KX2vlJy
http://db.tt/xXQfMIM9

cyn
12-22-2012, 06:53 PM
Did Alittle more work today on the box... got the ports in, and painted the box... still have the one side piece to get on.. Will end up doing it tomorrow when time permits me to get it done... would of had it done today but had other things to do...
http://db.tt/jLy7yYSh
http://db.tt/mOJzEDSB
http://db.tt/Vo6ac7pX
http://db.tt/IX37woWH
http://db.tt/IIew7WMJ

cyn
12-22-2012, 06:55 PM
I might end up doing some thing else on the front of the box later on down the road... but for now the black paint works... Might do a clearcoat finish on it or something not sure yet... might bedline it and be done with it..

audiobaun
12-22-2012, 07:43 PM
I have a box for two tens that ive used the hell out of, and used Flexstone paint on, and Clearcoat sealer, and its been excellent for durability,as far as moving quite a bit from vehicle to vehicle and has been in great apperance shape by far..Hard seal over the entire box/durable.Ive never used Bedliner on a box, but have heard it does very well

cyn
12-22-2012, 10:05 PM
I have a box for two tens that ive used the hell out of, and used Flexstone paint on, and Clearcoat sealer, and its been excellent for durability,as far as moving quite a bit from vehicle to vehicle and has been in great apperance shape by far..Hard seal over the entire box/durable.Ive never used Bedliner on a box, but have heard it does very well

I'm thinking something that will dry fairly quickly... if not carpet tomorrow... not sure I just know I'm ready for this **** box build to be done with lol...
I still have to rip everything else out of the trunk... get my rack built for my distro blocks and to hide all the wires... get some neoprene bumpers to mount the amps to the box since I have no where else to mount them at the moment... with the bracing in the box there should be no flex at all so they should be okay until I can get something built into each fenderwell....

cyn
12-23-2012, 12:00 PM
Got everything done with the box finally and got the Subs Mounted... Waiting on the caulk to finish drying on the wire hole... Soon as its tacky enough I'm throwing the box in the car and get everything setup to test out in about 3 hours or so.. there will be more pics coming tonight hopefully and a video or two of them in action..

http://db.tt/ecnr9VOW
http://db.tt/VvX3uqQl
http://db.tt/8qIe0dQs

cyn
12-24-2012, 02:31 AM
Okay... got the box finished up completely... got the amps mounted with cushions behind them... Will get some pics of them up later...
As of now... 2 custom 12" super shocker extremes thanks to HISPL ;
CDT front stage running off of a kicker 150.2 for now until my vfl hybrid shows up
Sub amp is an old school Earthquake d2 shredder...
Box.. 3.9cubes net.. tuned to 36hz... 2 4" 10"long round ports... massive air movement btw... if I had the ports running through my rear deck I could prolly pull a decent Hair trick from the front seats... This setup is by no means a monster low killer... It gets nasty tho, 30-45hz will hit with authority. This is one of the best sounding setup's i've had yet to date... I have the subs on around 700-800 watts each off the D2 right now... gain is **** near at 0 ... not bad on the stock electrical I have for now either...

RE Audio HC 12" what has been in the trunk for about 2 weeks now
http://db.tt/ONJkloDG

2 12" Custom Super Shocker Extremes
http://db.tt/Is5ingTY
http://db.tt/ZPL9iLec
http://db.tt/zhcntbmm

cyn
12-27-2012, 04:48 PM
got a little video uploading right now. will be 20-30mins before its completely up on youtube.. will post the link when its up...
sorry for the sound quality using my phone... just a FYI it sound completely better in person than from the video lol.... its not a complete monster but for
what I wanted its perfect and gets fsking loud..

cyn
12-27-2012, 11:11 PM
Got my VFL 150.4 hybrid in today... will get it hooked up some time tomorrow or this weekend...


http://db.tt/fdAePyB4
http://db.tt/d25HhlTD

cyn
12-30-2012, 02:28 AM
Okay... a little update... Haven't gotten around to getting a video shot yet... Will try tomorrow...
Had the AB installed had an Issue... Amp is being replaced.... AB will be back in when I can get it in, as of now I just have the Kicker ZX150.2 running my front stage..
If I can get around to doing it before I get back to work wed., i'm going to deaden the rear deck and floor boards of the car and another layer on the trunk lid and a few spots on the rear inside bumper as that is the major outside rattle zones. inside the door panels rattle pretty good... Not a whole lot of flex at all...

audiobaun
12-30-2012, 07:11 AM
Got my VFL 150.4 hybrid in today... will get it hooked up some time tomorrow or this weekend...


http://db.tt/fdAePyB4
http://db.tt/d25HhlTD

I picked one of these up along with 2-4480.1D mono amps,,..Nice looking little amps..Ive only hooked up one sub amp so far,,,Was going to get them all in until My brother came over, and we went to a gun show in his truck,and NO TUNES!!! 40 mile trip!!!NO FKN TUNES???WTF??Well, his amp got stolen he said,approx 3 weeks ago?/So, Merry Xmas to him, I put an Old school Alpine Duo-b 3550 4ch in,on 2 sets of 5.25 Polk components that I last installed..Got done,approx 2hrs ago/Finished up.Sounds Like He Has some TUNES now..2004 Toyota Tundra double cab..no sub..Trying to talk him into it..:santa:

audiobaun
12-30-2012, 07:13 AM
Okay... a little update... Haven't gotten around to getting a video shot yet... Will try tomorrow...
Had the AB installed had an Issue... Amp is being replaced.... AB will be back in when I can get it in, as of now I just have the Kicker ZX150.2 running my front stage..
If I can get around to doing it before I get back to work wed., i'm going to deaden the rear deck and floor boards of the car and another layer on the trunk lid and a few spots on the rear inside bumper as that is the major outside rattle zones. inside the door panels rattle pretty good... Not a whole lot of flex at all...


So what happened to the 4ch?Curious,hoping there isnt a issue with the amp in general?

audiobaun
12-30-2012, 07:18 AM
Info update..The American 4480.1D Hybrid Mini VFL that I have installed is doing nothing more than kicken ***,@2ohms atm, I ran it @1ohms pretty hard for approx 45 min or so,,,,No Issues..Working like a Beast:D

cyn
12-30-2012, 11:01 PM
So what happened to the 4ch?Curious,hoping there isnt a issue with the amp in general?

Just an Issue that I worked out with Jim.. nothing more nothing less..

audiobaun
12-30-2012, 11:12 PM
Just an Issue that I worked out with Jim.. nothing more nothing less..

thanks for letting me know..If I had some time today I would have hooked it up/4ch, and the other sub amp..Too busy today with more important issues.im glad to hear nothing serious of them..Cant wait to get mine wired up though:escape:

cyn
07-03-2013, 12:10 AM
Aight, been a while since updating or even being online. Have moved from Louisiana to Texas. Now a Project Manager for the Company I work for.
What has changed since last report.

Subs Changed to 15" SSA ICON
Sub Amp : ED Nine.1
Front Stage Amp : American Bass Hybrid 4 Channel

5 Layers of Deadner on the Trunk
2 Layers of Deadner in the Trunk
1 Layer complete through the Cabin of the Car.
All Deadner is Audio Technix Deadner.

Will update with some Pictures Soon...