PDA

View Full Version : Dc audio level 4 18 box help



Golden15
04-09-2012, 09:13 PM
I have a dc audio level 4 18 and I need a design for a box that would fit in a Toyota Camry. The max measurements are 38 wide 24 deep and 14 high. Those are metal to metal measurements so Amy smaller would be better to fit in there. I am going to use it daily and for comp. thanks for the help!!

RangerDangerV2
04-09-2012, 09:33 PM
6 cu ft tuned to 35hz.... I would go with areos

regizzle
04-09-2012, 09:40 PM
6 cu ft tuned to 35hz.... I would go with areos

My box is 6cu tuned to 35 hz with 2 6" aeros, Same sub.

regizzle
04-09-2012, 09:45 PM
is my box design ok? DC Level 4 18 - Page 3 - Car Audio Classifieds (http://www.caraudioclassifieds.org/forum/enclosure-discussion-design-construction-help/103388-my-box-design-ok-dc-level-4-18-a-3.html)

Design posted by Scapelli21.

However i ended up with 6 Dowel rods vs the original 4 i was going to use. All in all, Doing about 144db off 1100rms on one 18 in a tahoe, i aint even mad :<

hope you can see those specs and adjust appropriately. ^_^

Golden15
04-09-2012, 09:51 PM
I think the most I could fit is like 5 cubes. Would that be okay? And how many aeroports do I need?

Golden15
04-10-2012, 12:21 AM
Just kidding. I can fit like 6.3 cubes before ports. What port do I need?