04-08-2012, 01:51 AM
So i am using the subwoofer design toolbox to design a slot vented box for 2 fi ssd 10's. The numbers i came up with are as follows box volume per chamber 1.39ft3. after all displacements. My port is 5 11/16 tapered to 4 3/4 for height so i came up with an average height of 5.21 inches. Vent width is 2.5 inches. The way i figured it this should put the tuning right at 32hz. Thank you for taking a look and any suggestions are definetely welcome. Thanks- Dave.