PDA

View Full Version : ft3 vvx12



SMS
04-07-2012, 11:18 PM
twas on the skar website and noticed the suggested volume of a vvx12 is 1.75(same as the vvx10?) at 36hz. would it work in 2.4ft3 at 35hz getting around 1350w from a DD M1c at 1ohm? is that too much power- its tough to tell nowadays as alot of companies underate all there subs.

Kangaroux
04-07-2012, 11:28 PM
If you wanna give that sub that much power (which I don't recommend) don't go 2.4 cubes. You will bottom the sub out. If you want to run that much power you may want to go with something like 1.75 cubes that is more on the small side.

SKAR-MaliBOOM
04-10-2012, 11:51 AM
Big Power-Smaller box
Smaller Power-Bigger Box

:) I'd stick to that thinking IMO. 1300+ is way to much for any VVX unless it's in 1.5 or under