PDA

View Full Version : Best thing to use



Below20hzonly
04-07-2012, 03:57 PM
Ok so i have literally no tools at all that involve cutting wood besides a table saw. i was wonder what is the best thing to buy that is really good for cutting out sub/speakear cutouts, like for 10" subs or 6x9 speakers,etc.i just have no clue, other than really expensive shyt like at shop class back in high school. thanks

DoesDad
04-07-2012, 03:59 PM
Jig saw.

09civic
04-07-2012, 04:01 PM
Dremel Trio

Imtjnotu
04-07-2012, 04:04 PM
for 6x9 go with a jig saw....for sub cut outs use a router and the jig that has different sizes

Below20hzonly
04-07-2012, 04:05 PM
k perfect thanks

audiobaun
04-07-2012, 04:11 PM
Yep, a jig saw can be had for very little..But for an all around tool to do cut outs on doors /wood/grinding ect for detail...Dremel or my favorite RotoZip:cool:

thehardknoxlife
04-07-2012, 04:11 PM
Dremel TrioUhh, Dremels **** at cutting through wood. For the price of what one costs you could get a router (which I don't recommend unless you plan to make a bunch of boxes) which would be 10x better. The Rotozip is better (but not much), unless you plan on using either the Rotozip or Dremel for other uses, they wouldn't be a very good investment. Plus the bits are very lame and small. A jig saw works fine. It's cheap, the blades are cheap, and it does the job.

wenn_du_weinst
04-07-2012, 04:12 PM
you can get a brand new jigsaw for $20, If you plan to do round cuts a lot you should get a router and jig.