PDA

View Full Version : bolts that make best contact for voice coils



myjaja
03-13-2012, 07:41 PM
We're currently building an enclosure and Im going to have 8 bolts to connect both subs to. Im going to have each voice coil connected to each bolt for the ease of switching over to .25 ohm to 1 ohm. What kind would be the best with the best possible contact.

thank you

RangerDangerV2
03-13-2012, 08:00 PM
just use wire???

Kangaroux
03-13-2012, 08:06 PM
Whatever bolts you can pick up at lowes will work.

Mr.meyhem
03-13-2012, 08:11 PM
I just used some grade 2 bolted. Washers on each side to make a firm connection to the bolt. Worked rele well and kept a good seal.

cyn
03-13-2012, 09:07 PM
can use just about any bolts really... if you have a bolt supply store you can pick up some brass or copper covered bolts usually also.. I will be getting some brass bolts from a local company soon... well actually all threads