View Full Version : SOLD/CLOSED WTT SSD 12" for motor

03-02-2012, 09:48 PM
1. Product:

2. Specs:
Fs: 27.0 Hz
Re: 0.75 Ohms/coil
Qms: 4.60
Qes: .52
Qts: .47
Mms: 192g
Cms: 0.18mm/N
Sd: 480cm^2
Vas: 58.7 l
Spl: 85.3dB 1W/1m
Bl: 9.3 N/A
Xmax: 21mm
Rms: 800W
Sealed box: .8-1.6 cuft
Ported box: 1.8-2.5 cuft @ 33Hz
Sub OD: 12.500
Cut ID: 11.125
Mounting depth: 6.500
Displacement: 0.14cuft

3. Description/Condition:
Older double stack in great condition. Used it in my wife's car for 2 months on 600w. Took it out and has been sitting ever since getting dusty. No sagging & still stiff.

4. What you are looking for: :
3" motor. I can add some cash depending to motor

5. Pictures of your item for trade:

03-02-2012, 09:55 PM
I know a guy with an 05 RE XXX motor.

03-02-2012, 09:57 PM
i got a rf power hx2 12" basket and motor 4in coil

03-02-2012, 09:57 PM
Yeah, I talked to him and he wasn't interested in the trade.

I also forgot to put that this sub is a D2 ohm.

03-02-2012, 11:37 PM
what kinda motor u looking for?

03-03-2012, 06:21 AM
Something good I can build a 15" out of. I have an Alpha Max before and it was a great motor, but im open to anything right now.

03-03-2012, 01:22 PM
older db drive platinum plw15? its sitting in storage...the bolts holding the motor in place are a tiny bit loose but the sub still actually works in certain positions....good motor and i do believe they have 3" coils. i was going to try a recone on it but never got around to it as thats the only way to get the the bolts to tighten them. has a nice spoke basket too.

03-03-2012, 02:50 PM
I'll have to think about that one. I'm waiting on someone to get back to me about a possible trade, but I haven't heard back yet. I'll post up later.

03-03-2012, 05:59 PM
ok just let me know and i can get it out of storage tomorrow and get ya some pics.

03-03-2012, 09:25 PM
I'll let you know what happens, thx.

03-04-2012, 10:30 AM
I have a DD 9500 motor. I believe its a E or F. Also have a 15 inch kevlar cone

03-04-2012, 10:48 AM
I have a DD 9500 motor. I believe its a E or F. Also have a 15 inch kevlar cone
PM sent

03-05-2012, 09:21 PM
I'm gonna hold off on all offers at this time. I have a really good offer/trade pending by this weekend. If all goes well, it'll be gone. If not, I'll post back up and taking offers again. Thanks for everything so far!!!!!!!!

03-06-2012, 02:21 PM
I have a old school orion hcca tc9 sub 10, I had one redone by spl to make it a 15. its a 3 inch dual 1 inch slug tc9 motor that you can build it to handle up to 2000rms.