PDA

View Full Version : SOLD/CLOSED Zapco AG200, US Amps USA-150



miklebud
02-21-2012, 12:32 PM
Sold!!

J31Rob
02-21-2012, 12:38 PM
Actually interested in both. Can you post spec sheets on both amps (power @ 4 ohm is really all I need). Are they both 2 channels?

J31Rob
02-21-2012, 12:38 PM
Actually interested in both. Can you post spec sheets on both amps (power @ 4 ohm is really all I need). Are they both 2 channels?

miklebud
02-21-2012, 12:46 PM
J31Rob, I can't post spec sheets, as these are so old that any information online is very scarce. I can tell you the Zapco AG is the original Zapco Reference series, so the specs from the 200.2 are the same as this AG200
Total Power (14.4V @ 1kHz) Power
Dynamic (4W mono) 230 watts
.2% T.H.D. 205 watts
Rated Power / Channel T.H.D.+N
50 watts x 2 @ 4W < .025%
100 watts x 2 @ 2W < .14%
Bridged Mono
134 watts x 1 @ 8W .046% T.H.D.
205 watts x 1 @ 4W .12% T.H.D.
Frequency Response 20 20kHz, .12dB
S/N Ratio > 95dB
Transient Distortion (4W, 40W) < .01%
Slew Rate > 23 V/mS
Damping Factor > 166 @ 4W
Input Sensitivity
Balanced (DIN) 500mV 10V
Unbalanced (RCA) 250mV 5V
Separation > 64dB
Max. Current Requirements 26 Amps @ 200 watts
Idle Current .84 Amps
Dimensions 11L x 7.5W x 1.95H

As for the US Amps USA-150, I have never once seen a specs on that amp. But this is one from way back in the day. It says on it 150 Watts RMS, but I can comfortably say it puts out more than that (I'd say in the 300ish range). It pushed my 12" idMAX very nicely for the past 9 years or so.

EDIT - YES, they're both 2 channel amps. Both can be bridged to 4 ohms mono safely.

jeremyg1
02-21-2012, 12:55 PM
I am very interested in the US Amps.

If J31Rob dosnt take them PM me please.

pro-rabbit
02-21-2012, 01:00 PM
I already sent a PM lol I have paypal ready as well :D

I will take both if you would rather work out that deal..but I really only want the US AMP

pro-rabbit
02-21-2012, 01:00 PM
I already sent a PM lol I have paypal ready as well :D

I will take both if you would rather work out that deal..but I really only want the US AMP

jeremyg1
02-21-2012, 01:08 PM
I am okay with the zapco if pro-rabbit wants the us amp.

I only need 200 watts bridged at 4 ohm.

Spooney
02-21-2012, 01:21 PM
I will take either if everybody else falls through lol

pro-rabbit
02-21-2012, 01:22 PM
I will take either if everybody else falls through lol

Wake up earlier foo :sneaky:

pro-rabbit
02-21-2012, 01:22 PM
DBL POST :crap:

miklebud
02-21-2012, 03:19 PM
PM Me if you're willing to pay the Posted Price. A discount will be given to someone who takes both!!

miklebud
02-22-2012, 12:51 PM
Sold on craigslist for more than i was asking!