PDA

View Full Version : Need help mounting Image Dynamics XS65 Comp



Fresh101
02-19-2012, 02:29 PM
Hello Everyone, earlier I asked for some help in wiring the JL's C5-650 Component and now I want to mount some Image Dynamics XS65 Component speaker. I have a Chrysler 300, which is very spacious and missing highs in the back. My 4 existing tweeters are mounted in the front, two on my dashboard on top facing up to the windshield and the other two in the door panel on top by the door handle. I repeat again I don't have highs on the back and it sounds like C**P, like just vocal and pretty low. I want to mount this set on the back deck next to the existing 6x9.

My question is: Should I mount this 6.5" component on the back deck with tweeters on it, facing up to the windshield, as the deck is pretty flat or should I install the 6.5" in the deck and install tweeter separate and mount the tweeter on the top pillar on the back where the windshield holds and seat belt comes out (left & right)? Thanks in advance

Fresh101
02-20-2012, 01:11 PM
bump

zako
02-20-2012, 05:46 PM
It would have been better to put a set of coaxial speakers in the rear. But wait.. you already have 6x9s in the rear? Why are you installing additional speakers? I would have replaced the 6x9s with something better.

keep_hope_alive
02-21-2012, 01:04 AM
I agree that you can just replace the 6x9 with the XS65 comps.