PDA

View Full Version : (2) 12" SKAR Audio VVX-12D2 Box Build Help...



NissanKicker
01-31-2012, 04:31 AM
Hey, I just purchased (2) Brand New 12" VVX-12s for $175 [ yeah, I know.. A hell of a deal ]
... I'm wanting to do a trunk wall build... ( Firing forward ).

Vehicle: 1999 Nissan Sentra GXE 4-Dr
Subs: (2) 12" SKAR AUDIO VVX-12s
Amp: (1) Kicker KX2500.1D
Batt: - Don't Know Yet -
Enclosure: 4.926 [internally after port & sub & brace displacement] Tuned @ 30.07Hz
... Using (1) 6" Aero... 12.5" Long


This is a picture of the area i'm going to be working with:
... It's 32" Wide [from Strut mount to Strut mount] - I can go 18" High [maybe 20" if I push the board up] - I can go 30" Deep, but I'm just gonna leave it at 20"
http://i214.photobucket.com/albums/cc75/NissanKicker/882f446d.jpg

This is a design I came up with... But it looks like I'm going to have some spacing problems...
... The holes are the Cut out diameter... Not the full size of the sub[But subs together are going to take up 25"] I only have 32" to work with... The Aero is gonna take up 6.25"...
http://i214.photobucket.com/albums/cc75/NissanKicker/04c643be.jpg


... I'm stuck on what could be done... So if a box builder is willing to help... It would be greatly appreciated...

Suggestions, Advice, Thoughts, ANYTHING is welcome...

Bettr n' Revrse
01-31-2012, 04:42 AM
Skars dont need that much space man... Had mine in 1.7 at 31 which is about perfect for them...

chillin
01-31-2012, 05:09 AM
Why don't you move the port to a corner so it is not directly beside the sub

disturbed471985
01-31-2012, 05:18 AM
Got enough 6x9's????

Oh Like my man above said that port is to close... Move that wall of 6x9's and port up...

NissanKicker
01-31-2012, 05:39 PM
I though about that... [ Moving the port on the top corner ]
... I wasn't sure if it would effect anything..

That's too much space for the Skars? [ Is that 1.7cuft each? - I hope so.. ]

... And Yeah - I have quite a few 6x9s - Gonna add 4 more ( 1 in each door - replacing the 6.5s )
For a total of 8...