PDA

View Full Version : SOLD/CLOSED (MINT) SD5K with triple inputs



Ranalli
01-29-2012, 11:45 PM
Item(s) for Sale:

Have a SD5k-2 ohm version that is in mint shape. Only used for about 5 months at comp only. Hit back to back 153's sitting in blazer and back to back 152.8's out of it. Thats pushing two 15" HDC3-A's with D1 aluminum coils. No problems at all. Only selling to up grade.
Will come with aluminum tripple inputs by Toolmaker.



Item(s) Description/Condition:

MINT!!! Works 100% Would give it 9/10 just because it's used.



Price:

$800 plus shipping and would ship from 13367
ONLY TRADE WOULD BE FOR DC 7.5K IN GOOD SHAPE WITH CASH ON MY END.
Can get me faster by texting at 315-775-7611


Shipping and Miscellaneous Item Information:




Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
5. Pictures:

http://i616.photobucket.com/albums/tt243/5363/caraudio022.jpg
http://i616.photobucket.com/albums/tt243/5363/caraudio013.jpg
http://i616.photobucket.com/albums/tt243/5363/caraudio013.jpg
http://i616.photobucket.com/albums/tt243/5363/caraudio018.jpg
http://i616.photobucket.com/albums/tt243/5363/caraudio015.jpg

This is the setup I ran it in....

http://i616.photobucket.com/albums/tt243/5363/triples3.jpg
http://i616.photobucket.com/albums/tt243/5363/triples2.jpg
http://i616.photobucket.com/albums/tt243/5363/Newestset-up.jpg

mylows10
01-29-2012, 11:55 PM
hey ranalli ,this is the forum that you can find me on most of the time.i'm supposed to have a definate answer on my dc 7.5 on weds

Ranalli
01-30-2012, 12:00 AM
hey ranalli ,this is the forum that you can find me on most of the time.i'm supposed to have a definate answer on my dc 7.5 on weds

Ok, thanks

Bettr n' Revrse
01-30-2012, 12:52 AM
Nice setup

mylows10
01-30-2012, 12:54 AM
i was thinking the same peyton

Ranalli
01-30-2012, 12:58 AM
Thanks guys.

J31Rob
01-30-2012, 08:18 AM
Triple outs look sick on that amp! GLWS.

Ranalli
01-30-2012, 08:29 AM
Triple outs look sick on that amp! GLWS.

Thanks bud. They worked geat too. Adding them I gained .5,so copper would probably be another .1 or so I'm told. They also come with the amp.

J31Rob
01-30-2012, 08:30 AM
Thanks bud. They worked geat too. Adding them I gained .5,so copper would probably be another .1 or so I'm told. They also come with the amp.
Wow! That's an impressive gain for simply adding some more conductivity. Another free bump. Sorry for dumping.

Ranalli
01-30-2012, 08:36 AM
Wow! That's an impressive gain for simply adding some more conductivity. Another free bump. Sorry for dumping.

Well the factory output on these SD amps are only 4 gauge so your going from a single 4 gauge to three 0 gauge so it's a big difference.

Ranalli
01-30-2012, 07:11 PM
As you can see in pics this amp has a very small foot print. Perfect for small cars or for those of you who are in a trunk class. Can fit more cone area with smaller amp and not loose the power. Not much bigger than my d3100 as you see it sits right above it.

sacsking916
01-30-2012, 07:59 PM
how many batts did you have running ths thing? any interest in selling just the triple inputs?

Ranalli
01-30-2012, 09:10 PM
Have a kinetik 1400 under my hood and sx d3100 in the back. And a 200 amp alternator with a sx vcm with very little voltage drop. And as far as the triple inputs they go with the amp. But they are easy to get. TOOLMAKER

sacsking916
01-30-2012, 09:13 PM
Have a kinetik 1400 under my hood and sx d3100 in the back. And a 200 amp alternator with a sx vcm with very little voltage drop. And as far as the triple inputs they go with the amp. But they are easy to get. TOOLMAKER

i actually only needed one for my buddy to make them. hes a master machinist at his place (thats what they call him at least) and has no problems making them for me, just need the dimensions from the brazilian amps. im about to pick up an sd8k.

But i figured i'd ask. GLWS.

Ranalli
01-30-2012, 09:21 PM
The biggest wire I could get in the factory input was 2 gauge and it was tight.

sacsking916
01-30-2012, 09:29 PM
The biggest wire I could get in the factory input was 2 gauge and it was tight.

ouch. thats horrible. well i will definitely try to get some of these made asap then.

mylows10
01-30-2012, 09:32 PM
i had 0 gauge in mine when i had it

Ranalli
01-30-2012, 09:55 PM
i had 0 gauge in mine when i had it

The only way to get 0 gauge in it is to shave it down. I tried and 2 gauge goes in nice an snug.

Ranalli
01-30-2012, 09:56 PM
what this thing do at 1 ohm??? And around 12 or 13 volts, dipping into the 11ish range

I run this at 1 ohm. But never had it below 14 volts using a vcm.

Ranalli
01-31-2012, 09:20 AM
This is a awsome amp here and very small foot print. Someone must be looking for more room in their trunk.

sacsking916
01-31-2012, 12:31 PM
what this thing do at 1 ohm??? And around 12 or 13 volts, dipping into the 11ish range

these are rated at 1ohm at 12.8v :fyi:

sacsking916
01-31-2012, 02:36 PM
Ok cool. What about my voltage dropping to 10.9 on a burp?? Will it burn up or what??

i wouldnt trust any amp at that voltage

sacsking916
01-31-2012, 02:47 PM
@ sac, yea i know that voltage drop can not only be harmful to amp, but could cause fatal problems as welll. Gotta save up for Mechman i guess. 520 seems so danmm steep for an alternator. Can u research and see if anyone has one for less for me??

1997 cadillac seville sls
4.6 liter v8
Northstar engine

Thanks in advance. Let me know what prices u come up with and who the distributro is

have you called DCpower engineering? or maybe excessive amperage? mike singer, nations alts, ohio generators? there is a good chunk of companies right there that make H/O alts. google any of those and give em a call

sacsking916
01-31-2012, 03:20 PM
Let me ask you this, are any better than the others??? Quality wise or price wise??

pm me so we dont clutter up his F/S thread

Ranalli
02-01-2012, 06:36 AM
Am bump.

Ranalli
02-01-2012, 01:15 PM
Sale pending.

Ranalli
02-02-2012, 08:13 PM
2 more days and he will loose his deposit.

Ranalli
02-04-2012, 01:37 PM
He has til midnight then his loss.

Ranalli
02-27-2012, 10:02 PM
Back up for sale. Deal fell through.
Cash only no trades.

Ranalli
02-28-2012, 10:08 AM
Morning Bump. Need sold guys.

mylows10
02-28-2012, 10:13 AM
hate that shlt ,good luck ,thought this sold

Ranalli
02-28-2012, 10:25 AM
Yah thats why I wont hold again. First person with the cash and its gone. Behind on build now.

Ranalli
02-28-2012, 10:59 PM
Mega power here in a small package.

Ranalli
02-29-2012, 10:23 AM
$825 shipped in US.

Ranalli
03-01-2012, 01:23 AM
To the top.

Ranalli
03-01-2012, 07:13 PM
Need this sold. Getting offers but, not good enough.

Ranalli
03-02-2012, 09:06 AM
$800 shipped without inputs.

Ranalli
03-03-2012, 07:34 AM
Need this sold.

Ranalli
03-03-2012, 05:19 PM
For the next 24 hours only, $800 shipped with the triple inputs.

Ranalli
03-04-2012, 12:27 AM
(((sold)))