PDA

View Full Version : FI BTL15 in 3.45cuft enclosure



boddy
01-29-2012, 08:31 AM
How will it sound? I havent got that much more room to play with.

boddy
01-29-2012, 08:37 AM
Tuned at 28hz

JerryEllis
01-29-2012, 09:09 AM
FI's like bigger boxes... And if you have that small of a box you are going to need a lot of room for port.. when I had my re mt ten in a 3 cube box I had to make my single 6 inch aero like 21 inches long. I think your box will to too small to get the kind of performance that your going to want

boddy
01-29-2012, 09:22 AM
Whats the smallest capacity a BTL will perform well in?

JerryEllis
01-29-2012, 09:27 AM
@ 28 Hz your going to need atleast a cube more.. 3.75 would be good if you want to tune it to like the 40's lol

boddy
01-29-2012, 12:05 PM
Just had another measure of my boot i should be able to get another 100mm onto the height if i take my parcel shelf out. Works out at just under 4.5cuft, this is going to be a tight squeeze haha.

JerryEllis
01-29-2012, 12:08 PM
its going to like 4.5 cubes

---------- Post added at 12:08 PM ---------- Previous post was at 12:07 PM ----------

i was doing 51's with my btl 15 at 32 hz in a 4.7 cube box and massive hair tricks

JDuhaime309
01-29-2012, 09:58 PM
Hey I have over 100 designs for boxes. Plenty in my inventory so if you need help or would like me to design you a box email me at: DieselMech428@gmail.com
I may have one I will give it a look but you can email me. And I will gladly give you a design and the spec's, and the dimensions.

boddy
01-30-2012, 02:05 PM
Sorry but i live in the UK and shipping would be a bomb, i've found someone quite local anyway he's going to help me measure out my boot. He said i should be able to get 4.5 easy.