PDA

View Full Version : will this sound good?



jaegerbombs
01-26-2012, 09:21 PM
I am using a pair of 12" 2003 kicker cvrs 2ohm dvc subs(all I can get right now) So I've decided to go with this sealed box. It recomends 1 cube/ftper sub. I'm Going to build itto these specs highth 24", width 54", depth 1 (top) 5", depth 2 (bottom) 10".These demensions yeild a 4.12 cube/foot box. Putting a dividerin temiddleto get2 seperate chambers. Will this give me great low end base for likerap? Likethisbox isgoing to bebeind seatof singlecab truck. Will itsound greatand produce truck shaking base?

RangerDangerV2
01-26-2012, 09:27 PM
truck shaking= no sound good...

jaegerbombs
01-26-2012, 10:06 PM
I didn't litterly mean truck shaking bass

DoesDad
01-26-2012, 10:09 PM
This thread looks awfully familiar.......

jaegerbombs
01-26-2012, 10:11 PM
Haha yeahhh I decided on a sealed box just now trying to get opinions from other people if it'll sound good

slvrado28z
01-26-2012, 10:13 PM
i use to have those..i had a 1.5 each sealed sounded pretty good

jaegerbombs
01-26-2012, 10:16 PM
See were getting somewhere thanks for advice!

IonRL205
01-26-2012, 10:16 PM
Kicker CVRs are not SQ subs. Had CVRs in a sealed box and they weren't that great. Id go with something else if you are wanting to get loud, low and sound good...

DoesDad
01-26-2012, 10:17 PM
I've had CVR's. I really prefer them ported. They're just not made for sealed IMO..... And to get "truck shaking" bass they're going to need room to breath and be vented.

slvrado28z
01-26-2012, 10:20 PM
is the 2003 model tan and black

jaegerbombs
01-26-2012, 11:03 PM
Yes tan and black and. Nice rubber edge. So it recomends that for ported box that its 1.75. This box is 2 2 cube/ft chambers. How should I port it? As said earlier its a box behind te seat.

Moble Enclosurs
01-27-2012, 02:08 AM
I could help.............

Moble Enclosurs
01-27-2012, 02:09 AM
I will tell you this.....this particular driver does not mind sealed enclosures. You just have to make it right. It can work well in either application, but be careful of port area with this driver....not for being too small, but being too large........