View Full Version : Btl 18
01-02-2012, 05:23 PM
Did a search that came up empty.
In need of recommendations for enclosure. I have 15.1796cuft total to work with. This is for a single 18, might run 2 unsure at the moment.
01-02-2012, 05:29 PM
Is that before or after wood displacement? You can fit 1 18 no problem, 2 is going to be a tight fit especially if you were looking to do a lot of port area or tune low.
01-02-2012, 05:33 PM
correction I have 15.1796cuft
This is before wood or anything
01-02-2012, 05:38 PM
What are your dimensions? Subtract 1.5" from each dimension to get the gross inside volume. I would subtract 2.25" from the height because I am sure you want to do a double baffle (or if it's a wall, do the depth or something, doesn't really matter)
01-02-2012, 05:39 PM
no wall, trunk
I'll work on wood displacent, few angles lol
01-02-2012, 05:41 PM
Are you building the box inside the trunk?
01-02-2012, 06:02 PM
Trunk I strongly suggest you look into a pair of 12's
01-02-2012, 06:26 PM
Yes built into trunk (set into place)
after wood displacement 11.7245cuft. This does not include port area, bracing, or sub
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
I already have the 18"
Was looking at a set of 15's but came across this and jumped on it.
01-02-2012, 06:27 PM
On that note I leave best of luck to you.
01-02-2012, 06:33 PM
Why you say that?
01-02-2012, 06:36 PM
2 18's in a trunk will be hard I assure you, its difficult for me putting one 18 in my trunk. Mainly because of height, rounded edges entering the trunk etc..
I mean through my trunks dimensions before any displacement I have 10 cubes to work with, but even just throwing 6.5 cubes in there was the tightest I could fit.