PDA

View Full Version : t line towers



wenn_du_weinst
12-31-2011, 06:02 PM
ok who's got some. I'm waiting on paypal to clear to start ordering parts for mine.
any thoughts or pics?

Kangaroux
12-31-2011, 06:04 PM
DIYMA 12 volt mobile audio car stereo system forum wholesale diymobileaudio.com (http://diyma.com)

Here you go

wenn_du_weinst
12-31-2011, 06:10 PM
actually that would be diy.com not diyma. I don't like discussion HT on those forums for obvious reason's.

duanebro
12-31-2011, 06:30 PM
I have the TriTrix TL. And a design for a box for another speaker I built, currently it is just ported, But it will be a MLTL once I build the new box.

wenn_du_weinst
01-01-2012, 12:29 PM
I know a lot of people like the tritrix. I'm going to be using these Markaudio Alpair-10 Grey 6" Full Range Gen 2: Madisound Speaker Store (http://www.madisoundspeakerstore.com/approx-6-fullrange/markaudio-alpair-10-grey-6-full-range-gen-2/)
off of this amp
Topping TP60 Tripath TA2022 50WPC (80WPC 4 Ohm) Amplifier 310-326 (http://www.parts-express.com/pe/showdetl.cfm?Partnumber=310-326)
http://img26.imageshack.us/img26/1314/markaudiodualalpair10tl.png
http://img252.imageshack.us/img252/1314/markaudiodualalpair10tl.png
rear ported with mark audio's bracing design

duanebro
01-01-2012, 01:41 PM
Interesting, I can't get the madisound link to load on my phone. Two full range 6" drivers. wouldn't that have all kinds of issues with beaming and phase?

wenn_du_weinst
01-01-2012, 02:06 PM
possibly, mdf is cheap if it ends up with problems I'll just scale down to 1.
I also have a line array design drawn up as well.
here is the single driver version sides were left off to see insides more clearly
http://img195.imageshack.us/img195/8366/markaudioalpair10tline.png
http://img832.imageshack.us/img832/695/markaudioalpair10tline3.png
http://img714.imageshack.us/img714/7149/markaudioalpair10tline2.png