PDA

View Full Version : broke my adapter plate for 5 1/4 speaker to 5x7



jsluss17
12-27-2011, 11:26 PM
is this not good? rockford fosgate obviously does not know how to make sturdy adapter plates so thats why it broke. will the 5 1/4 fit in the 5x7 easily with no problems anyway? i don't really wanna have to make my own and don't really want to go out and buy another one if i don't have to

jsluss17
12-27-2011, 11:53 PM
please respond

jsluss17
12-28-2011, 01:14 AM
forever alone. what im trying to say is will a 5 1/4 fit easily into a 5x7/6x8 hole?

dumple
12-28-2011, 01:17 AM
is 5 and 1/4 a circle the same size as 5x7 or 6x8 oval??

Bettr n' Revrse
12-28-2011, 01:21 AM
Pics?

keep_hope_alive
12-28-2011, 02:25 AM
you need the adapter plate. you need an airtight seal around teh speaker.

make one, buy a new adapter, or pay a professional to make one for you. making the adapter is fast and only requires a drill and a jig saw.

Ronny
12-28-2011, 03:20 AM
Yeah, why the hell would you want the 5 1/4" driver sitting in a big hole with nothing around it?
You have to seal the driver up against it's baffle. If obtaining an adapter is too tough a feat, then glue it back together and install carefully.

zako
12-28-2011, 04:14 AM
Why isn't anyone questioning that 5-1/2 speaker is being fitted into 5x7 hole? Is this because a 6.5 inch speaker will not fit into 5x7 holes?

I understand that the choices for 5x7 woofers are limited (although companies like Infinity, Image Dynamics, and JL Audio are making fine 5x7/6x8 component speakers that will fit), but if going with a round speaker, I would have installed at least a 6-1/2, if possible.

gpgtp
12-28-2011, 07:40 AM
Pics of damage? is it not fixable?