PDA

View Full Version : need a cut sheet



stl_314
12-21-2011, 04:53 PM
i have an audioque 18
will be on 1500 rms
will be in a 98 dakota

33 wide up to 44 tall 14 front to back

stl_314
12-21-2011, 04:55 PM
this will be for daily heard they like being tuned high but im not positive on that


also box has to be bukilt in the truck

I Like Waffle
12-21-2011, 05:03 PM
Sounds like you need a whole box design, i did my best with your measurements and drew this up for you.


http://i39.tinypic.com/1z4yc6v.jpg

stl_314
12-21-2011, 05:06 PM
that is what i need is a box design with a cutsheet

05trailblazer
12-21-2011, 05:27 PM
dont be too sarcastic man. thats cruelty what your doing right there :wow:

Sounds like you need a whole box design, i did my best with your measurements and drew this up for you.


http://i39.tinypic.com/1z4yc6v.jpg

stl_314
12-21-2011, 05:29 PM
i can give someone like 5 bucks or something if you can make one real quick
need it in the next 30 minutes

05trailblazer
12-21-2011, 05:31 PM
^^ its going to cost more than that and they're going to need more info than what you just provided.

stl_314
12-21-2011, 05:32 PM
lol then someone needs to chime in and let me know what they need and how much

05trailblazer
12-21-2011, 05:39 PM
i already pm you who to contact have you done that yet?

stl_314
12-21-2011, 05:40 PM
yes sent a msg and ty

Bggd_GMC
12-21-2011, 05:44 PM
hit up Ram Designs or Pro_Coņejo for a box design/cut sheet...... your looking at like 30 cuts

05trailblazer
12-21-2011, 05:53 PM
there you go

CAT MAN
12-21-2011, 06:18 PM
i can do 10$ with cut list and 3d model

stl_314
12-21-2011, 06:21 PM
i already have it being done but ty

05trailblazer
12-21-2011, 06:22 PM
^oh look you have somebody who will do it for cheap and with 3d model now thats impressive.....

stl_314
12-21-2011, 06:23 PM
lol yea i would have jumped on it in a heart beat if pro rabbit did not already msg me

CAT MAN
12-21-2011, 06:23 PM
^oh look you have somebody who will do it for cheap and with 3d model now thats impressive.....

need to get my name out there and saw the chance lol

Tupolev
12-21-2011, 06:27 PM
The 3D model is the easy part, making cut sheets are a mother. Anyways, Tony is a cool dude that doesn't afraid of anythings. :nerd:

05trailblazer
12-21-2011, 06:28 PM
^^ well if he takes your offer will see how good of a designer you are

CAT MAN
12-21-2011, 06:29 PM
i think tupoliv knows how i roll