PDA

View Full Version : Help with port location (Quick question)



phantom240
12-20-2011, 04:23 PM
Quick question, I'm glassing an enclosure between my two rear seats and was wondering if it would be best to fire the port into the cabin or port it into the trunk? Porting into the trunk would allow for a much larger port.

For reference, here's an in-progress pic.
http://i5.photobucket.com/albums/y152/phantom240/2011-12-15143313.jpg
http://i5.photobucket.com/albums/y152/phantom240/2011-12-15153454.jpg

pro-rabbit
12-20-2011, 04:25 PM
in to the cabin but depending on the rest of the setup it would depend on where.

Sealed would be a good option too.


Also, your avatar is stupidly huge and scary.

phantom240
12-20-2011, 06:23 PM
LOL yeah that thing is a blast from the past.I'll be using two 6.5" subs, either DD SW6.5s or JL 6w3v3s, and they'll fire forward. They'll sit about shoulder level. As I had it planned before, I would have a single 3" Precision Port that would fire forward about level with the armrest between the front seats.

pro-rabbit
12-21-2011, 09:22 AM
This will a bit hard to figure out, but I would think running the port out top with a slight angle to back may yield a better result.

phantom240
12-21-2011, 01:29 PM
Like firing it toward the rear windshield? If that was the case, I would have to relocate the subs, or make the enclosure look retarded, lol.

phantom240
12-23-2011, 01:16 AM
Bump