PDA

View Full Version : FS blown 18's with tripple 7.5" slugs 1.25" top plate .5" bottom LOCAL PICK UP ONLY



Kryptonitewhite
12-01-2011, 09:25 AM
Item(s) for Sale:

4 18s


Item(s) Description/Condition:


blown

Price:
200/ea



Shipping and Miscellaneous Item Information:

local pick up


Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

I have 4 18's that I bottomed out with 3kW per sub, 12kW RMS total for the subs. I never even scortched a coil on them, just ripped the coils from the spiders from over excursion below tuning... tuned to 23Hz had a Jim Jones song that went subsonic with my EQ set to +9dB at 20Hz 25Hz and 32.5Hz :D

The 4 18's are Blueprint Audio 1803's, designed by Fi starter/owner, Ascendant Audio owner, RE starter, Blueprint Audio starter Scott Atwell. Scott/Fi will recone them anywhere from single soft spider to 5 stiff spiders for $100/ea, IIRC he said after 5 stiff pack it will cost a little more per spider. They have tripple 7.5" slugs, 1.25" thick top plate, .5" thick bottom plate, about 55-65lbs/each.

If you are willing to pay shipping, I will dig up the wooden crates I received them in and boxes...otherwise local pick up only. Sioux Falls South Dakota 57104

$200 per sub.

$800 all four for now, will negotiate later down the road if theyre not selling...I am in no hurry, I am still working on getting the van running again let alone installing another 350A alt.

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6346.jpg

voice coils not burnt, rather tripple joint ripped off

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6260.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6259.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6256.jpg

1/2" bottom plate

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6247.jpg

2.5" of slug

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6246.jpg

1.25" top plate

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6244.jpg

over 4" of motor

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6242.jpg

7.5" diameter slugs

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG6241.jpg

Bettr n' Revrse
12-01-2011, 09:28 AM
Very nice looking! 4" coils?

Kryptonitewhite
12-01-2011, 09:34 AM
Very nice looking! 4" coils?

:( 3" coils, which is why I am selling... I'm looking for 4HPs so I can customize them :D

Kryptonitewhite
12-01-2011, 09:48 AM
made a nice weight while PL PRO was curing on the door manifold :)

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG5321-1.jpg

gap pic

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4840.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4835.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4834.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4833.jpg

pics taken earlier some may be helpful some redundant sorry

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4813.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4812.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4811.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4809.jpg

Kryptonitewhite
12-01-2011, 09:59 AM
http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4804.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4207.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4192.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4190.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4186.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4185.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/CIMG4183.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/IMG_0459.jpg

http://i248.photobucket.com/albums/gg178/kryptonitewhite/IMG_0449.jpg

aaronwhitlock3
12-01-2011, 10:56 AM
Where you live?

Kryptonitewhite
12-01-2011, 12:30 PM
too bad you wont ship :(
I will, put you gotta pay..and it's not cheap, they're heavy! :)


Where you live?

Sioux Falls South Dakota 57104

I can sell the motors for $175/ea, $700 for the 4 if that helps

Bettr n' Revrse
12-01-2011, 02:09 PM
Wanna sell the motors?

Kryptonitewhite
12-01-2011, 02:29 PM
Wanna sell the motors?

I can do $175 per motor, $700 for all for, you pay shipping.

How much would the baskets go for and would anyone be interested?

basscort2009
12-01-2011, 07:02 PM
what kind of power do these things take with an FI recone? interested in 2 motors and 2 baskets.

Kryptonitewhite
12-02-2011, 11:10 AM
I was running an AP30001D on each one, never burnt a coil...just ripped tripple joints apart when it smashed on the spider landing.

manyhobbies
12-03-2011, 05:14 PM
I would be interested in the baskets since I really want to go to 18's, I'm just not sure on that basket design and were these single voice coil. What basket is it and would you be able to give me some dimentions. My zip code is 45822 if you would wanna figure up shipping cost involved. Thanks, Russ

I can do $175 per motor, $700 for all for, you pay shipping.

How much would the baskets go for and would anyone be interested?

nu2spl
12-03-2011, 08:10 PM
I would be interested in the baskets since I really want to go to 18's, I'm just not sure on that basket design and were these single voice coil. What basket is it and would you be able to give me some dimentions. My zip code is 45822 if you would wanna figure up shipping cost involved. Thanks, Russ

those are just standard 6 spoke 18" baskets same ones that Sundown(black),AB,Atomic,DD(black)....and countless other companies use.the one i have has an OD of 18 3/8.they do look like single VC. in that one pic i only see one terminal.

Kryptonitewhite
12-04-2011, 05:58 AM
those are just standard 6 spoke 18" baskets same ones that Sundown(black),AB,Atomic,DD(black)....and countless other companies use.the one i have has an OD of 18 3/8.they do look like single VC. in that one pic i only see one terminal.

correct, though you can have up to 4 terminals

manyhobbies
12-04-2011, 11:04 AM
I was thinking they were the same baskets the shop uses to build the 18's that my buddy can get, but I was'nt sure. Could you get me a total price for the 4 baskets including shipping to 45822, so I can compare prices to see if I can save some cash? Thank you, Russ
correct, though you can have up to 4 terminals

J31Rob
12-04-2011, 11:30 AM
.75" slugs. 7.5" would be massive.

manyhobbies
12-04-2011, 12:02 PM
Out of curiosity, how much mechanical excursion are these baskets capable of. I ask because I like to play down around 30hz and below with approx. 2-3000w each sub. Thanks, Russ