PDA

View Full Version : Small 10" box



agarabaghi
10-28-2011, 09:15 AM
Looking for the smallest box possible... Needs at least 6" of mounting dept for an Sundown audio SA10"

I was thinking something like

12x12x8

would be about .66cubic feet before displacement... Any clue if i could find this pre built or will i have to build a box?

S4MICHIGAN
10-28-2011, 10:35 AM
You would have to build a box for it, or have one built.... I would reccomend a ported box tho have you thought about having one designed and built for you?

agarabaghi
10-28-2011, 10:36 AM
Not going ported. This is in a boat, so I would build the box from mdf and seal it off with resin to water proof it from moisture.

Already have a RE SX on 1300watts in the passenger compartment in a ported box @ 34hz. Just wanted to add something small under the drivers feet for a little extra thump. Im only going to push ~360w to the SA10

zeegs
10-28-2011, 11:03 AM
Here's what I'm using, I've got one under each front seat built to house a 10" slim Kenwood or RE Audio slim

http://i277.photobucket.com/albums/kk68/9ballrook/undersetrack001.jpg

http://i277.photobucket.com/albums/kk68/9ballrook/underseatsub001-1.jpg

agarabaghi
10-28-2011, 11:05 AM
True. I have a bit more room than that. I need to measure it. I want to run the SA10, since i already bought it. It need 6" of mounting dept and my 12x12x16 box was just a bit too wide (12" side)... so i think if i do something like mentioned in the OP it should work

audiobaun
10-29-2011, 05:07 PM
Just like zeegs, there is a premade box for like 41.00 shipped on e-bay.Worth checking out???Down fire box

agarabaghi
10-29-2011, 05:42 PM
Link? Do you know the mounting dept? I have a sundown sa10 that I want to use

audiobaun
10-29-2011, 06:02 PM
Mobil soundworks
W=13.25 "
H=12"
D=6.5"
Mounting depth for subwoofer is 4.25",and is perfect for Kicker CVT subs.. what it says
$41.39 with free shipping
on ebay under 10in subs.Not sure how to post link on here yet.Hope this has helped,and is about all i could find for single 10 under seat of 05 f-150.without having one made under 125 bucks my max for that small of an enclosure built.You may even be able to modify it to your needs also,????

agarabaghi
10-29-2011, 06:26 PM
i need 6" of mounting dept. thanks though

Ninesvnsicks
10-29-2011, 06:32 PM
Does your boat have an engine that has an alternator? I've always wondered how people put big stereo's on boats.

agarabaghi
10-30-2011, 10:24 AM
Yea, the engine is a 350 chevy v8 putting out approx 350hp. It comes with a 100amp alt stock, and im looking at a 200amp upgrade.

Here are some pictures, ill be putting a build thread together as soon as it's done.

http://img267.imageshack.us/img267/4013/imagezrp.jpg
Cadence A7HC / JL m2150 / WetSound Syn 6 - mounted on starboard fiberglassed to the hull and then carpeted

http://img851.imageshack.us/img851/7313/imagepy.jpg
Picture of the engine with cover off, usually there is another sun pad over it

http://img828.imageshack.us/img828/4465/imagezkx.jpg
2006 Mastercraft X1

http://img638.imageshack.us/img638/3852/24200413.jpg
Wakeboarding!