PDA

View Full Version : Opinions on this box

Lowflyin
10-08-2011, 01:53 PM
36w X 15.75H X 27D Box with a port that is 25.5W X 3.5H X 27.9D for 35hz. is this correct? Im looking for 5.5 cuft net at 35hz and 89 sq inches of port. take into account also .28 cu ft for sub displacement/.

JoshC
10-08-2011, 01:57 PM
Calculators, Charts, and Diagrams (http://www.the12volt.com/info/diagrams.asp)

Lowflyin
10-08-2011, 02:26 PM
i realized i messed up a little, let me fix it real quick

Lowflyin
10-08-2011, 03:21 PM
36w X 15.75H X 27D Box with a port that is 25.5W X 3.5H X 27.9D for 35hz. is this correct? Im looking for 5.5 cuft net at 35hz and 89 sq inches of port. take into account also .28 cu ft for sub displacement/.

Lowflyin
10-08-2011, 06:25 PM
Anyone?

Lowflyin
10-09-2011, 09:06 AM
Ya? No? Rack city?

Lowflyin
10-10-2011, 12:14 PM
So pretty much if I'm not Paying someone they won't help?

i2ain2thunder
10-10-2011, 12:19 PM
lol no just bump someone will eventually come in and help ya out...but dude just use the calculators, may take you a few minutes to figure out how to use them but they are pretty easy. I'd help you but my experience is prob about as much as yours.

Lowflyin
10-10-2011, 12:23 PM
I got more dimensions on post #4 I'm pretty sure it's right I just wanna make sure, thanks though

kushy_dreams
10-10-2011, 05:27 PM
From my calculations I have 5.525cu/ft after sub and port disp with 89.25sq in of port area tuned to 34.92hz.

CAT MAN
10-10-2011, 05:32 PM
what do you want what subs etc.... i can help a bit for free

RAM_Designs
10-10-2011, 07:45 PM
You're close enough. Considering no bracing, I got ~5.25ft^3 with a tuning just under 36hz. With the port needing to be 28" long, I'm assuming you can just use the depth of the box (25.5") and put a 45 in the back corner to turn the port that last bit.

7.25ft^3 before displacements
27"x4.25"x25.5"(interior depth of box) = 1.7ft^3 port displacement
sub displacement per your info: .28ft^3
------------------------------------
~5.25ft^3 after sub and port displacements.

Lowflyin
10-11-2011, 09:15 AM
Thanks Ryan, this sound alright for an hdc 318, I have 3000w for it so a little smaller box may be ok. Andrew mast said he has had good results between 5-6 cu ft so I went off that