PDA

View Full Version : Sweet Megacab Box


CHEMMINS
10-07-2011, 08:55 PM
http://img846.imageshack.us/img846/6853/dual15wedge.png (http://img846.imageshack.us/img846/6853/dual15wedge.png)

Uploaded with ImageShack.us (http://imageshack.us)

Designed by Moble Enclosures!
Bettr n' Revrse
10-07-2011, 09:00 PM
Nice... Specs?
CHEMMINS
10-07-2011, 09:02 PM
60" long, 12" deep at the base, 9" deep at the top. For a pair of 15's. That rise at the bottom is about 4"
Kangaroux
10-07-2011, 09:21 PM
How exactly does the port work with it tapering like that? Does it act similar to a horn?
Canaan
10-07-2011, 09:36 PM
More info please?

I just don't see 2-15's working well in the space you have to build.
CHEMMINS
10-07-2011, 10:46 PM
More info please?

I just don't see 2-15's working well in the space you have to build.

T/S specs.....designed for small boxes.

fs 35.66 hz
qms 4.74
vas 1.54 ft^3
mms 468.3g
revc 2 ohms in series
qes .36
spl 89.2 db 1w1m
qts .34
le 2.81 mh
bl 25.33
Flastrongman
10-07-2011, 11:28 PM
let us know how it sounds.
benchambers80
10-07-2011, 11:36 PM
big subs, big box
Moble Enclosurs
10-08-2011, 01:48 AM
How exactly does the port work with it tapering like that? Does it act similar to a horn?

Not really. The taper is to control the peak from a much larger compression area than what a horn utilizes in most cases for coupling. Its a good balance with moderate efficiency. here is the anechoic response:

http://img703.imageshack.us/img703/8859/dual15wedgeresponseanec.png (http://imageshack.us/photo/my-images/703/dual15wedgeresponseanec.png/)

Now keep in mind this was design with only dimensions given by the client. No specific preferences were given and this was designed mainly on usability. I did what I could with the limitations, and the design shape as a priority as well.
Moble Enclosurs
10-08-2011, 01:50 AM
More info please?

I just don't see 2-15's working well in the space you have to build.

Yea, it was a challenge. You have a point. The limitations were great in this design. We did what we could with what we had. The baffle will also be using a seperate baffle for mounting depth as well. I have an idea for the client that he may like for that one :)
CHEMMINS
10-08-2011, 12:47 PM
Yup this should turn out pretty good. Trucks are always hard to do, as to not impede any interior functions or space.