PDA

View Full Version : free box plans for 2 10" type r's



Andrew_K
10-03-2011, 11:20 PM
i have 2 10" alpine type r subs, model swr-1042d dual 4 ohm.

would any of the free box plans ( i am thinking 3 cuft for the pair? if that sounds right..) in the help 101 section work with these subs and make them sound good? I'm not new to car audio, just the box aspect of it, i am learning as i go. i prefer ported!

thanks in advance!

Bettr n' Revrse
10-03-2011, 11:21 PM
Look at the "Free Box Plans" Sticky under the enclosure help section...

Andrew_K
10-04-2011, 02:06 AM
i have seen that section, but which plan would suit that setup best is what i am asking.

Andrew_K
10-04-2011, 01:18 PM
bump

Andrew_K
10-04-2011, 07:21 PM
bump !

Bettr n' Revrse
10-04-2011, 07:22 PM
Hmmm Ill check

Bettr n' Revrse
10-04-2011, 07:24 PM
3 at 35 wouldnt be bad... 3.2 or a little bigger would be better Id bet though

Andrew_K
10-04-2011, 09:58 PM
okay, does having them in the same chamber have a major affect than having a slot port between the two? could i fit 2 10's in the plans you mentioned?

Bettr n' Revrse
10-04-2011, 10:00 PM
No they should be fine in the same chamber

Andrew_K
10-04-2011, 10:26 PM
okay, i took another look and i can fit a 3.5 cube plan, which would be suited for daily driving the best?

slvrado28z
10-04-2011, 10:32 PM
use the 3.5 tuned to 34

Bettr n' Revrse
10-04-2011, 10:35 PM
use the 3.5 tuned to 34

Ya thatll be fine after displacement...

Andrew_K
10-04-2011, 10:59 PM
i don't see that plan there.. you mean one of the 3.5 tuned to 32 plans?

Andrew_K
10-05-2011, 12:04 AM
bump for a final answer, then I'm good to go

slvrado28z
10-05-2011, 12:09 AM
yeah 32 would be fine