PDA

View Full Version : need box for DC lvl 4xl 15in



907tacokid
09-28-2011, 01:40 PM
im driving a 1996 toyota tacoma and i need a box for a DC lvl 4xl 15in that will give me the maximum output from the sub. any tuning, dementions, chamber size, anything will help. im having my car audio shop make me a box for it and i need some paramiters to tell them so they can start.
thanks in advance

RAM_Designs
09-28-2011, 01:49 PM
How much power are you running to it?

907tacokid
09-28-2011, 01:49 PM
sorry forgot to add that the truck is an extended cab. the only reason i give that info is because of the air space that the truck has. its not very big inside. i can only use one side of the truck tho. the seat right behind the driver seat is where the box can fit. im thinking having the sub low to the ground and the port up high so theres still lots of air space in the chamber. give me your thoughts. thanks!

907tacokid
09-28-2011, 04:00 PM
I'm going to be running it off of a hifonics Brutus 2100rms amp. wired at 1ohm. so according to hifonics 2100rms. but probly a little less than that.