PDA

View Full Version : 8" Flared Ports For sale



FarrisAudio
08-29-2011, 11:24 PM
Item(s) for Sale:

Complete 8" Flared ports


Item(s) Description/Condition:

I have new 8" Flared ports for sale. I make them. They are sold painted black, I can Paint them any color, however i do charge extra to paint other colors. I use a paint booth, with a spray gun. not a spray can.

Each flare ranges from 4.25" to 4.5" long, so you can have as short of a 8.5" port for higher tuning.

The pipe is sdr-35, 1/4" thick. A complete port includes 2 flares, 10" center piece, and 2 pvc connectors, all painted black. One flare has mounting holes.

I can cut the center pieces into any length. 10" is included with the port, any extra is $5 per 6 inches.

The Flare I use is not a perfect quarter circle type flare. It gradually tapers out, similar to the psp flares.

I also sell mounting plates. You can use an 11" cutout with these, however there isnt much wood for the screws to grab. I cut a smaller circle, and use a round-over bit for mounting the flare.

My connector pieces are about 2" long, to 3". They aren't made as consistent as any of the other parts. 2" long might not seem long enough. However, they are very tight, hammering them on will be required. I can say you could pass on using tape, but its better to be safe and use it. Its never fun if the port were to fall off while playing, and something as bad as having your subs unload happen.
Price:

$45+ shipping, for a complete port
special color-$5
Mounting plate-$5
extra centers-$5/6"
Non-painted port(greenish color as seen in pics)-$40

. I will work with pricing on orders of multiple ports.


Shipping and Miscellaneous Item Information:

Buyer pays shipping, message me with your zip code and quantity of ports you want, and I will give you a quote.


NOTICE:As of right now, i have 3 finished ports. When I run out, I will make them as I receive orders, and extras when I make ordered ports as I can.

Making these are my side hobby. If i don't have any finished ports available, I am going to have to say it will take up to 5 days maximum to ship a complete Port, if ordered on Monday. I can ship parts such as connectors and centers next day. I work 35 hours Monday-Friday, and go to college full time. If ordered on Monday-Wednesday, it will more than likely be completed Thursday, shipped Friday. I only have class(night classes) Mon.-Wed. If ordered Thursday or Friday, I should easily be able to ship Saturday.

I apologize for this, but it is the best I can do, assuming I don't have any on hand. I don't want anyone thinking I am up to anything if they order on a monday, and it takes the said amount of time.

If you need to contact me, message me on here. I will give you my number, I would like to communicate through text. I Usually only have access to my computer at night. Also, I can text at work and school, lol.

Thank You,
Alex Farris


Item Pictures:
http://i658.photobucket.com/albums/uu309/farrisaudio/nameport.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/taper.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/paint.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_8652.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_7372.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_7242.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_7242.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_6602.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/IMG_1232.jpg

super_duper
08-30-2011, 01:11 AM
woop woop... I want an all black one... will pm you wednesday

FarrisAudio
08-30-2011, 12:21 PM
woop woop... I want an all black one... will pm you wednesday

Sounds good, just hit me up.

nu2spl
08-30-2011, 02:26 PM
how long would i need for a 40hz tuning?

528hz
08-30-2011, 02:29 PM
how long would i need for a 40hz tuning?

Go on pisp-inc.com and use their calculator. It already takes into account displacement so just plug in your numbers and you'll find the length needed.

Nice ports by the way, Farris. Great to see someone take up this project. Lots of people want these things!

Jroo
08-30-2011, 02:39 PM
sent you a pm with a couple of question

FarrisAudio
08-30-2011, 08:19 PM
Go on pisp-inc.com and use their calculator. It already takes into account displacement so just plug in your numbers and you'll find the length needed.

Nice ports by the way, Farris. Great to see someone take up this project. Lots of people want these things!

Thanks man.


Pm's replied, except I think it was Jroo's inbox whos was full.


I forgot to mention another very good score. Tristen cambell, 1 18" btln2, audiopipe 3000, had a bandpass wall in his car, with a single 8" flare. Did a 151.7@30hz. Pretty impressive, especially off that amp. Was done at a meca show in M2.

nu2spl
08-30-2011, 09:20 PM
Thanks man.


Pm's replied, except I think it was Jroo's inbox whos was full.


I forgot to mention another very good score. Tristen cambell, 1 18" btln2, audiopipe 3000, had a bandpass wall in his car, with a single 8" flare. Did a 151.7@30hz. Pretty impressive, especially off that amp. Was done at a meca show in M2.

thats sweet,i have a custom built 18 and a 500.1 so i could see about the same with one of these,maybe more if my build is right.im in meca M3

FarrisAudio
08-31-2011, 11:47 AM
thats sweet,i have a custom built 18 and a 500.1 so i could see about the same with one of these,maybe more if my build is right.im in meca M3

It would more than likely work great.

Even with that Power, I would stick with m2. I had a single 18 in m2. I used a 60 amp anl, and an audiopipe 5 amp. i could burp about 400 amps of current through that.

FarrisAudio
08-31-2011, 10:57 PM
2 completed ports left.

FarrisAudio
08-31-2011, 11:17 PM
Also, I am working on an even better way of connecting them. I dont believe it is needed, considering I had to slightly lube up the connector and hammer to get it on. However it would be cool for an extreme type set up. Not sure about price, since I got these rods from scrap at work. I'll have updates soon.

http://i658.photobucket.com/albums/uu309/farrisaudio/portconnector3.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/portconnector2.jpg

http://i658.photobucket.com/albums/uu309/farrisaudio/portconnector1.jpg


Also, These flares are over a year old, and have been in many enclosures. You could say they're wh0res. None of my new ones look like this

FarrisAudio
08-31-2011, 11:43 PM
Heres a video of the 4th order 18". He ended up doing a 152.5 w/o fuse, 151.7 on fuse.

Log In | Facebook (http://www.facebook.com/video/video.php?v=204756469534939)

joshy629
09-01-2011, 08:45 PM
Live in the same town as this guy. I have 2 of his ports. They work great and are easy to tune from box to box

Bettr n' Revrse
09-01-2011, 08:51 PM
I may take one at some point

FarrisAudio
09-04-2011, 09:57 PM
1 Finished port left

Alhart
09-06-2011, 11:33 PM
Good Stuff Here. Local Buddy, Have had a couple of these and they never let me down.

FarrisAudio
09-07-2011, 12:28 PM
Thanks Austin.

Out of ports btw, I have one I need to make.

FarrisAudio
09-07-2011, 04:35 PM
Here is a mounting plate.

http://i658.photobucket.com/albums/uu309/farrisaudio/plate3.jpg


http://i658.photobucket.com/albums/uu309/farrisaudio/plate1.jpg


http://i658.photobucket.com/albums/uu309/farrisaudio/plate2.jpg

Bettr n' Revrse
09-09-2011, 03:29 AM
Nice... Have one of those mounted up?

FarrisAudio
09-17-2011, 07:28 PM
Nice... Have one of those mounted up?

Sure don't, sorry.


BTW, first post is updated. 3 finished ports ready for sale now

FarrisAudio
09-17-2011, 07:34 PM
Ok, i guess it was posted too long ago to update lol.

Anyways, 3 ports available right now. Sold 2 last night, shipped one. Prly wont get anymore flared til next friday.

SPL KID
09-24-2011, 12:23 PM
Ok, i guess it was posted too long ago to update lol.

Anyways, 3 ports available right now. Sold 2 last night, shipped one. Prly wont get anymore flared til next friday.

Can I get a price shipped quote to 27616 please. Will want port after the end of the month perhaps.

CerwinVega_Fan
10-09-2011, 05:38 PM
have anymore mounting plates?

porkchop22
10-15-2011, 08:37 AM
if any one has contact info with alex, i need to get in touch with him. i have lost contact with him for over a week now....is he okay?

porkchop
10-16-2011, 09:45 AM
bump

dbeez
10-16-2011, 09:49 AM
Text me at 502-649-6005 I have his cell phone number

porkchop
10-16-2011, 09:53 AM
thank you very much for attempting to help...
i have his cell # that was current up till last wednesday to the best of my knowledge, it is full vm box now.
text sent just in case your info is different or more current.
thanks again!
chop

porkchop
10-16-2011, 09:54 AM
i believe you and i meet at carlcasper last year and you perhaps also talked with my bro chicagofan for a while about ports? recognize the build in your avatar...

dbeez
10-16-2011, 10:12 AM
Its possible I know the number I have me and alex have been texting back and forth the past 2 days so its working. And I talked to many so its possible I know my truck drew a little attention at campers.

porkchop
10-16-2011, 10:41 AM
Its possible I know the number I have me and alex have been texting back and forth the past 2 days so its working. And I talked to many so its possible I know my truck drew a little attention at campers.

that is messed up!
perhaps you could ask him to refund our money or respond about our ports, please?
i really am confused right now, did not think i would read this approach....he is fine, really?
no replies or attempts made to contact us 11 days!

porkchop
11-05-2011, 02:19 PM
still have not received refund or ports since septembers payment.....not a good buisness man, will not keep to his word.

c_b_
11-12-2011, 02:40 PM
any update here....