PDA

View Full Version : Re-coned SA8's



Electrodynamic
08-22-2011, 02:42 PM
1. Product: Re-coned SA 8" subwoofers.



2. Specs:

D2
RE: 3.28 ohms (series)
FS: 41.6 Hz
Qes: 0.513
Qms: 6.606
Qts: 0.476
Le: 2.778 mH
Vas: 3.285 L
BL: 17.138 N/A
Cms: 83.341 um/N
Mms: 175.654 g
Sens: 78.476 dB @ 1w/1m

D4
RE: 6.08 ohms
Fs: 44.66 Hz
Qes: 0.594
Qms: 6.337
Qts: 0.545
Le: 4.26 mH
VAS: 4.44 L
BL: 21.20 N/A
Cms: 80.8 uM/N
Mms: 157 g
Sens: 80.06 @ 1w/1m



3. Description/Condition: Re-coned and in perfect working order. The drivers are being sold as-is with no warranty. I bought a lot of used motors from Jake, am cleaning them up, putting new baskets and spacer rings on them and re-coning the drivers with all new soft parts. For those of you who don't know me, I own Stereo Integrity and am a partner/subwoofer designer for Obsidian Audio and I also build production drivers, do re-cones, and drop-in's for Sundown Audio.

I can build any SA-8 you want. Normal coils are dual 2 Ohm and dual 4 Ohm. Right now I'm focusing on the 12-spoke basket but later on I will get into the newer style basket models.

If you are interested in these you MUST EMAIL ME YOUR ZIP CODE!!! My email address is [email protected]

4. Price: : $90 plus shipping.



5. Pictures:

http://www.stereointegrity.com/images/Obsidian/SA8top.JPG

http://www.stereointegrity.com/images/Obsidian/SA8side.JPG

http://www.stereointegrity.com/images/Obsidian/SA8term.jpg

http://www.stereointegrity.com/images/Obsidian/SA8butt.JPG
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Kangaroux
08-22-2011, 02:47 PM
Just out of curiosity, what do you guys use to measure woofer specs? WT3?

j&b4ever
08-22-2011, 03:33 PM
i have a blown 1 if you want to buy it

SPLaudio
08-22-2011, 06:50 PM
ttt for Nickelodeon, good guy here...

Electrodynamic
08-23-2011, 06:16 PM
Two Dual 4's are sold. I still have two Dual 2's available.

I'm building these on a need basis. I'll stock up a few for a while but I have a lot of these motors at my disposal so I can build as many as people want.

j&b4ever
08-23-2011, 07:50 PM
do you no where i can get a new surround to fit the sa-8

Electrodynamic
08-23-2011, 08:03 PM
You will need to get them re-coned because you can't simply glue on another surround.

But back OT, I'm building two more dual 4's right now and will be ready for Corey on Thursday. I still have two dual 2's sitting here waiting to be snagged up! :D

coreyjerome
08-23-2011, 08:12 PM
thank you cant wait to get them!

statonburrell
08-23-2011, 10:34 PM
could you make me 4 d2s with the new baskets?

Electrodynamic
08-23-2011, 11:01 PM
could you make me 4 d2s with the new baskets?

All of my re-cones have new baskets, rings, and soft parts. I can make you two more D2's for a total of four. You will need to email me with your zip code and a description of what you want. (email addy is in my first post)

Electrodynamic
08-24-2011, 11:30 AM
Corey, if you see this please respond to my last email. If I don't hear from you today I'm not going to build them up to be ready by Thursday because I need to know if you want two or three.

Electrodynamic
08-25-2011, 11:06 AM
Four dual 2's are being built for Staton this week. :D I'll get the all of the hard parts assembled tonight for sure.

Electrodynamic
08-25-2011, 07:49 PM
Staton's four 8's are almost done. The shims come out tomorrow at which point they will be tested to ensure proper operation, dust caps put on, tested again, and then shipped out by the time the FedEx man arrives!

Electrodynamic
08-26-2011, 05:02 PM
Staton's drivers had to wait until the glue was dry on the dust caps so they will be going out on Monday.

I have replied to all shipping quote questions so check your emails. :)

j&b4ever
08-26-2011, 09:26 PM
how much to recone my older sa-8

statonburrell
08-26-2011, 09:52 PM
Nick is an awesome guy to deal with keeps you updated step by step and double checks his work.

Electrodynamic
08-27-2011, 07:46 PM
Took a video showing one of the steps I go through getting the 8's ready. Tim, this is one of your 8's!

SA8 testing - YouTube (http://www.youtube.com/watch?v=7MD71U_Y7mc)

Imtjnotu
08-27-2011, 07:57 PM
i so want to do a tline with this

Electrodynamic
08-27-2011, 08:49 PM
LOL!!!! Nice signature picture!

joker4096
08-29-2011, 02:11 AM
So I am interested in running two of these. Dual 4s with a Sundown SAE-1000D. Will it push them fine? what type of box is recommended and what specs? Do you have two reconed dual 4s for sale?

Electrodynamic
08-29-2011, 01:51 PM
So I am interested in running two of these. Dual 4s with a Sundown SAE-1000D. Will it push them fine? what type of box is recommended and what specs? Do you have two reconed dual 4s for sale?

As my original post states I can build any stock coil configuration you want and if you are interested you will need to email me. For answers to your other questions please contact Sundown Audio.

coreyjerome
08-29-2011, 06:28 PM
So will my 3 beauties be ready tomorrow?

Electrodynamic
08-30-2011, 09:14 AM
Questions about orders need to be handled via email. I won't respond here on the forums.

Electrodynamic
08-30-2011, 06:14 PM
Corey's triple SA8's in D4 configuration during the build process tonight:

http://www.stereointegrity.com/images/Obsidian/Corey.JPG

http://www.stereointegrity.com/images/Obsidian/Corey2.JPG

Electrodynamic
09-06-2011, 07:12 PM
All emails have been responded to and Paypal invoices have been sent out to those who have expressed genuine interest.

Four SA8 D4's getting built for Mr. D. They should be ready to be shipped out on Friday!

http://www.stereointegrity.com/images/Obsidian/Dimaggio.JPG

Trancer
09-10-2011, 02:04 AM
Thinking of running two SA8's ported in my Sierra. Can I ask why you dont offer any sort of warranty if you own SI? I do however, understand that the motors are used and bought from Jake, but would like some sort of reassurance.

Electrodynamic
09-12-2011, 01:20 PM
Thinking of running two SA8's ported in my Sierra. Can I ask why you dont offer any sort of warranty if you own SI? I do however, understand that the motors are used and bought from Jake, but would like some sort of reassurance.

The SA8's I re-cone are guaranteed to work but I am not offering a manufacturers warranty as I am not the manufacturer. I'm performing these re-cones after hours to help Jake move the 8's that need rebuilt. I'm not going to add customer abuse issues on these 8's to my already incredibly busy days.

screwgreen
09-12-2011, 06:51 PM
i emailed you, please email back! f i d d l e r 9 5 at g m a i l . c o m

30Hertz
09-12-2011, 11:31 PM
emailed

URGE25
09-13-2011, 02:10 AM
I just sent you an email about three 8" subs shipped out to my address...

Electrodynamic
09-13-2011, 09:38 AM
All emails about the 8's have been responded to. :)

DC GTP
09-13-2011, 02:27 PM
You have mail :)

Electrodynamic
09-20-2011, 10:37 AM
Since I can't edit my thread anymore here is the edited text:

Description: Drivers are built to order. Re-coned and in perfect working order. The drivers are being sold as-is with no warranty. I bought a lot of used motors from Jake, am cleaning them up, putting new baskets and spacer rings on them and re-coning the drivers with all new soft parts. For those of you who don't know me, I own Stereo Integrity and am a partner/subwoofer designer for Obsidian Audio and I also build production drivers, do re-cones, and drop-in's for Sundown Audio.

I can build any SA-8 you want. Normal coils are dual 2 Ohm and dual 4 Ohm. Right now I'm focusing on the 12-spoke basket but later on I will get into the newer style basket models. I can also equip them with a copper clad aluminum "SPL" coil which is only 0.1 to 0.2 dB down from the all aluminum, more expensive, SPL coil at no extra charge.


If you are interested in these you MUST EMAIL ME YOUR ZIP CODE!!! My email address is [email protected] I will NOT respond to questions about shipping, what I can build for you, etc, here on the forum. If you are genuinely interested you need to email me.

Build time and an estimated shipping date are all included in my Paypal invoices. Be SURE to read the invoice! Usually I can build everything in a week and ship them out the week after you order, but the details are in the invoices.

ACE74
09-20-2011, 02:42 PM
YOu have mail from me and my contact info

Greggk
09-21-2011, 09:55 PM
you got an email from Z o m b i e S o l d i e r 0 1 @ y a h o o . c o m

subdicted
09-22-2011, 07:23 PM
hey would you be willing to do a trade? for some apex super junior 8"s at all??
I have 6 of them.. and im wanting 4 sundowns instead

Electrodynamic
09-24-2011, 10:01 AM
All emails have been responded to. I've got two sets of two 8's that will be tested and shipped out to their customers on Monday!

T.I.K.
09-24-2011, 10:43 AM
Do you build these with stock soft parts only?

subdicted
09-24-2011, 11:12 AM
soooo no then?

Electrodynamic
09-24-2011, 05:43 PM
Yes these are rebuilt SA8's using stock soft parts except only what is noted in the description.

subdicted
09-24-2011, 08:42 PM
So??????????????
no on a trade for 6 apex super junior 8"s?? i only want 3

HighTQCummins
09-24-2011, 11:34 PM
I had emailed you tuesday, and I haven't recieved one back. I checked my spam folder and everything and I got nothin

Electrodynamic
09-25-2011, 09:23 AM
I'll check again on Monday once I get back in the office. Could you re-send it again just in case? Thanks.

HighTQCummins
09-25-2011, 07:06 PM
alright, I just resent the email

cookboy
09-26-2011, 08:36 PM
how much for one D2 shipped to 13760

disturbed471985
09-27-2011, 06:28 AM
Email sent for price shipped on 1 dual 2ohm sub and price shipped for 2 dual 4ohm subs. Not sure which direction I wanna take my build.

Electrodynamic
09-29-2011, 01:08 PM
Four subs built and tested that are ready to be picked up today by FedEx. :)

FYI: I do have the newer v1 style baskets and soft parts. Jake ran out of the original 12-spoke basket cones so I have to use the newer parts now. I had to keep a tight lid on the fact that I had the v1 style parts available to me until Sundown sold out of the shallow, original style, cones. But now that the shallow cones are out of stock I only have the taller cones and newer baskets at my disposal. There is no up-charge for using the new parts. The price stays the same.

Electrodynamic
10-05-2011, 01:27 PM
Five new style SA8's are being built this week. I'll get pics of them uploaded tomorrow. Oddly enough all five of these subs, for two different customers, opted for the lighter copper clad aluminum coils. :)

southernboom88
10-05-2011, 02:03 PM
Five new style SA8's are being built this week. I'll get pics of them uploaded tomorrow. Oddly enough all five of these subs, for two different customers, opted for the lighter copper clad aluminum coils. :)

Hey, please send me a pm. I have some questions about the sa8's and couldnt figure out how to pm you..

Electrodynamic
10-05-2011, 03:51 PM
My PM's are disabled on every forum I'm on. I stated in the first post of this thread that people need to email me. My email address is listed in the first post as well.

Electrodynamic
10-07-2011, 06:01 PM
Building up the 8's tonight. Three more to go until I'm caught up with orders. I'll post a few pics once I'm done building them.

ace_800
10-07-2011, 06:14 PM
Emailed about a boot for one....

Electrodynamic
10-07-2011, 07:03 PM
All of the drivers are built. Only four of them need testing after the glue dries, which will be done on Monday at which point they will be packed up and shipped out! Here are the pics from today:

http://www.stereointegrity.com/images/ReConedSA8s/FourMotors.JPG

http://www.stereointegrity.com/images/ReConedSA8s/Motors&Baskets.JPG

http://www.stereointegrity.com/images/ReConedSA8s/Terminals.JPG

CCAW coils assembled with the spiders getting ready to be installed:

http://www.stereointegrity.com/images/ReConedSA8s/CCAWcoils.JPG

http://www.stereointegrity.com/images/ReConedSA8s/BuiltSA8s.JPG

http://www.stereointegrity.com/images/ReConedSA8s/All5.JPG

Electrodynamic
10-10-2011, 04:14 PM
All emails have been responded to. I just tested the last four CCAW-equippped 8's and they passed with flying colors. Their dust caps are on and will be ready for shipment tomorrow.

pinoy2o9
10-10-2011, 04:20 PM
those new backets looks really clean.

can u give me a quote on 3 sa8 with d2 ship'd 95358

disturbed471985
10-10-2011, 04:34 PM
those new backets looks really clean.

can u give me a quote on 3 sa8 with d2 ship'd 95358

Read the OG post you have to email him on prices and details.. But they do look sxy new basket or old..

Electrodynamic
10-11-2011, 06:20 PM
Read the OG post you have to email him on prices and details.. But they do look sxy new basket or old..

+1 :)

Just got two more CCAW D4 Ohm drivers built tonight. Will test them tomorrow and get them shipped out this week!

cookboy
10-17-2011, 07:57 PM
trades?

Electrodynamic
10-18-2011, 08:04 PM
Here's a few pics from tonight's building. Four D2's for Ron G:

http://www.stereointegrity.com/images/ReConedSA8s/RonG.jpg

http://www.stereointegrity.com/images/ReConedSA8s/RonGclose.jpg

Pataforce8
10-18-2011, 08:35 PM
****. I would be all over this if I was allowed to have a car again.

Greggk
10-18-2011, 08:44 PM
Have any D2's by chance?

elancohen92
10-18-2011, 08:56 PM
Trades?

disturbed471985
10-19-2011, 05:02 AM
Have any D2's by chance?

LOL he better only $68 more dollars then I have enough for 3 d2's shipped to my door...

GavinVoy
10-19-2011, 04:41 PM
asked for a quote a few weeks ago. im ready to buy one if you have any. sent you an email about it.

Electrodynamic
10-20-2011, 11:22 AM
What is your email address or can you send your email again? To the best of my knowledge I'm caught up on emails.

cookboy
10-22-2011, 12:32 PM
emailed you, ready to buy

financethis
10-23-2011, 04:00 PM
i need one d2 shipped 64153. pm me price.
also i have a blown sa8 d2, anyone buy those? much to recone what i have?

ChristianJ
10-23-2011, 11:00 PM
i need one d2 shipped 64153. pm me price.
also i have a blown sa8 d2, anyone buy those? much to recone what i have?

He can't pm people and doesnt respond to questions on the forum or at least thats what I gathered by reading his posts...

p.s.
Electrodynamic, I emailed you for a quote. I'll be looking forward to your response. THanks!

Electrodynamic
10-24-2011, 04:02 PM
Christian, I believe I responded to your email today.

financethis
10-25-2011, 04:34 PM
emailed you, hopefully you will respond this time

Electrodynamic
10-26-2011, 07:59 AM
emailed you, hopefully you will respond this time

If you had emailed me like I stated in the original post I would have emailed you back. This is exactly what I posted:
If you are interested in these you MUST EMAIL ME YOUR ZIP CODE!!! My email address is [email protected] I also said in this thread that I do not respond to PM's or people asking for quotes in this thread. I will get you a quote after I get to the office and read your email.

disturbed471985
11-01-2011, 11:35 AM
Just emailed u.. Are u still offering the CCA coil as an option for no extra charge? Also, other then being lighter what all does this effect? Thermal? Mech? Oh they all come with gaskets and boots correct?

Electrodynamic
11-01-2011, 08:00 PM
Already responded to you. Check your email.

ChristianJ
11-01-2011, 09:15 PM
Payment sent. WooHoo! Thanks Nick!

cookboy
11-05-2011, 04:04 PM
got my sub today. looks great! can't wait to get it all hooked up on monday. thanks!

sundownz
11-21-2011, 04:59 PM
This will be one of the only places to get v.1s now... we sold out of new v.1s today @ our warehouse.

CAT MAN
11-21-2011, 05:36 PM
shoot bro. i need 4 sa 8's. pm me a price to 27027 anyone of yall can. i just need a price

slvrado28z
11-21-2011, 05:46 PM
i will need 2 sa 8s anyone? price to 79701

disturbed471985
11-22-2011, 04:05 AM
Guys you have to email him. He will not reply too PM's..

VDIMARA
04-20-2012, 12:44 AM
I NEED 4 SA 8s d2 total? shipped to 76040