PDA

View Full Version : Fs: 18" ssa xcon d1



Nut Hair Trick
08-16-2011, 06:44 PM
Item(s) for Sale:
18" SSA XCON D1



Item(s) Description/Condition: I've had this sub for a little less than 2 months for my home theater build and loved it. I guarantee you it has less than 3 hours on it and is probably not broken in yet. All I've done is watch one movie and played some music and that's it. It was ran on 1 channel of my pro audio amp at 1250w. I loved this sub, and my next car audio sub purchase will be an SSA. It's now time for me to focus my attention and $ to car audio. Cosmetically 10/10 Function 10/10




Price:
$280 Shipped
or will CONSIDER trade for an XS Power D3100, D6500, D3400 battery + 1/0 wire or cash




Item Pictures:
http://i47.photobucket.com/albums/f166/fullyinvolved/photo9.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/photo8.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/Emclosure/0032.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/Emclosure/007-1.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Firebird 1991
08-17-2011, 07:10 PM
that box is sick! Did you build that or buy that? and what are specs on it?

Nut Hair Trick
08-17-2011, 07:16 PM
Thanks, I built it. The box is 30.5 h x 41 w x 22.5 d 11.75cuft tuned to 23hz.

Firebird 1991
08-17-2011, 07:18 PM
Wow i bet that thing shakes the entire house! What did you use on the outside of the enclosure exactly? looks like undercoating but im guessing not

Nut Hair Trick
08-17-2011, 07:24 PM
Here's some better pics.
http://i47.photobucket.com/albums/f166/fullyinvolved/Emclosure/023-1.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/Emclosure/017.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/Emclosure/019-1.jpg

Nut Hair Trick
08-17-2011, 07:27 PM
The sides are my attempt at a very high gloss black with tons and tons of sanding. The middle, top rear and bottom baffles are rolled on with Rustoleum hammered black.

Firebird 1991
08-17-2011, 07:35 PM
Looks great man! also one other question then ill get outta your thread lol

I read your running a pro audio amp to them, I too have a pro audio behringer ep2500 that i wanna run to a pair of 18s or 15s but i dont know what cables i need to hook it up to my onkyo home theater receiver?

Nut Hair Trick
08-17-2011, 07:43 PM
I had it hooked up to one channel of an EP4000 which is basically the same amp as the EP2500, but just the newer model. I too have an Onkyo receiver(Nr-509). I bought an RCA_>XLR cable from monoprice to connect to the single sub preout on the back of the ONKYO. Since it was an unbalanced signal going to the amp, I took apart the XLR end and put a wire jumper from the shield to the ground and it worked fine. You could just run ONE of these to the amp and you'd be fine running 2 channels. You do not need a Y splitter. Just turn the switch on the back from "stereo" to "Parallel" and it will send the signal to both sides. Hope this helps.

---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------

And thanks for the compliments

Firebird 1991
08-17-2011, 07:46 PM
it sure will! Thanks a bunch!

Nut Hair Trick
08-17-2011, 07:48 PM
Np

Nut Hair Trick
08-19-2011, 11:08 AM
Price reduced to include shipping, $280 Shipped! Lowest I can go

Nut Hair Trick
08-21-2011, 02:46 AM
bump

Team TH (Donny)
08-21-2011, 05:57 AM
Trade for my DB Drive PT2000.1D? Can easily handle .25 ohm loads (with good electrical). I run .5 ohm load daily and amp never gets even warm. Its a little over 2 ft long. Its a beast!

http://img94.imageshack.us/img94/9066/dsc00512zt.jpg (http://imageshack.us/photo/my-images/94/dsc00512zt.jpg/)

http://img543.imageshack.us/img543/539/pt20001dinternals2.jpg (http://imageshack.us/photo/my-images/543/pt20001dinternals2.jpg/)

Nut Hair Trick
08-21-2011, 09:01 AM
Nice amp. But, sorry, I have all the power I need for the subs I'm running.I haven't heard a whole lot about the db line but will check them out. I've been out of car audio for a couple of years and haven't been back until recently

Team TH (Donny)
08-21-2011, 04:24 PM
Alright, that's fine. It's rather rare to get your hands on the PT2000.1D's anymore.. If you want to know more about them you might ask a few heavy DB Drive competitors on USACi forum site. (USACi (http://usaci.forumotion.com/forum)). Or even perhaps get in touch with Danny from DB Drive. The retail on them when they came out was $1599. If you look into their products you want the stuff that is meant for competition.. Such as PT2000.1D, PD2000.1D, PT3500H.1 (Now Okur A7 Not PT), PT3500L.1 (Now Okur A7 Not PT), PT7500.1 (Now Okur A7 Not PT) for amps, and for subs DB Drive PLT(12, 15, or 18)WD's, WDX(12, 15, or 18)'s. Good luck with you new setup, man. I dont have a video of my current setup yet, but you can check out this old video of the amp at 1 ohm load powering one DB Drive PLT15WD.


http://www.youtube.com/watch?v=EXkspE30qjk

BTW, that is a DB Drive PLT15WD in back of truck in this video.

Nut Hair Trick
08-23-2011, 03:03 PM
Trade for my DB Drive PT2000.1D? Can easily handle .25 ohm loads (with good electrical). I run .5 ohm load daily and amp never gets even warm. Its a little over 2 ft long. Its a beast!

http://img94.imageshack.us/img94/9066/dsc00512zt.jpg (http://imageshack.us/photo/my-images/94/dsc00512zt.jpg/)

http://img543.imageshack.us/img543/539/pt20001dinternals2.jpg (http://imageshack.us/photo/my-images/543/pt20001dinternals2.jpg/)
This sub is gone! Traded straight up with Team TH (Donny) for his DB Drive PT2000.1D. Sub sent Via UPS on 08/23/2011 at 12:48 PM

Dlord340
08-23-2011, 05:16 PM
Awww man!!!

Nut Hair Trick
08-23-2011, 05:26 PM
Awww man!!!
haha hell, it was up for a week! I was afraid it wasnt going to sell.

Team TH (Donny)
08-23-2011, 08:32 PM
Yeah. Now I just have to get another one of these :) along with hopefully a DB Drive PT7.5kh. The amp was sent via USPS (along with 1/0 gauge) on 08/23/2011 at 03:35:47 PM. I miss it already.. but looking to go bigger!

Dlord340
08-23-2011, 08:46 PM
It's all good, I couldn't pay till friday anyway. Good product and price, just sure most are on a tight budget like I am but it would have sold no doubt. Enjoy your amp though.

Team TH (Donny)
08-23-2011, 10:15 PM
Here are a couple videos I took today right before I pulled the amp out to ship. Of course its nothing like seeing and hearing in person! Videos just can't pick up the flexing that well, nor the intensity of being in there, haha. This system peaks in db's at 53 hz, song played is in the mid 40's.


http://www.youtube.com/watch?v=v64OQwXvZj8


http://www.youtube.com/watch?v=OhHuX7knRkE

Team TH (Donny)
08-23-2011, 10:19 PM
Here's a real crappy video with the 2 15's I had. Camera used was horrible though. This is now an older video.


http://youtu.be/u0gmTi4XbdQ

KEN2810
08-24-2011, 09:35 AM
Pioneer deh p800prs for trade

Nut Hair Trick
08-24-2011, 10:29 AM
Pioneer deh p800prs for trade
Sorry, I left them in the truck when I traded it in.

Nut Hair Trick
08-24-2011, 11:44 AM
I was wrong

Team TH (Donny)
08-24-2011, 01:51 PM
Amp works great! Those gut pictures of truck were taken right after I built the box and before I put the amp in subs in. After I put the subs and amp in box I never took anything out until yesterday which was just the amp to ship. Those videos I took yesterday was not to "prove" anything! I hadn't taken any videos of that setup before yesterday so I did so before it was too late.

BTW, the pictures I use for the internals of the amp are not of this amp, but of another PT2000.1D I found on the internet. I use those for people to view what internals the amp has without opening my own amp. My amp has never been opened and never needed repaired, so all original from manufacturer. I bought it brand new in box about a year ago from a guy in St. Louis, MO paid $450 cash plus gas from here to there and back. I seriously love this amp and miss it already, but like I told you I'm moving up. I'm about certain this will be the next build 2 of the 18's, 2 PD2000.1D's (older style of PT2000.1D), and two Kenetik 1800's.

Team TH (Donny)
08-24-2011, 01:54 PM
Pretty lame how your accusing me of lying in the PM, I haven't lied to you! Get your facts right before you go accusing people..

Team TH (Donny)
08-24-2011, 02:10 PM
Ok, whats wrong with the amp? You posted these videos that you "took today" to try to prove the amp was in good physical/working condition before you sent it off. But, 2 days ago you were posting an ad for these very subs in the video talking about you "HAD"this equipment in your truck. You also posted pics of the truck stripped down to the shell.
http://www.caraudio.com/forums/subwoofer-classifieds/521497-4-15-logic-soundlab.html
If the truck was like that 2 days ago how are you getting that video on the day of shimpment? You're lying, that's an old video. If you feel the need to lie, then you are hiding something. Not to mention the shipping fiasco where you shipped it USPS, since you "just missed" the fed ex or ups pick up. You could have still shipped it fedex or UPS, it would have went out the next day, and still got here 3 days sooner than USPS.

If I sent a flawless $400 sub off, in exchange for a burnt up piece of ****, things will get very nasty. If that is in fact the case, then you better refuse the shipment when that sub gets to your house. Thats all I have to say.

Wow, whats it matter how I shipped anyway you told me your not on a time schedule, so now you want it fast?.. And why didn't you say something once I called you on the phone yesterday right after shipping stating i shipped via USPS and told you that I had taken videos before I took amp out so I would have videos of the setup..