PDA

View Full Version : quick box question



chevyboy91
08-15-2011, 11:57 AM
if i want to slap together a quidk sealed box how would i avvount for the subwoofer?

when a sub calls for a cuft meausurment is that accounting for the pace of the sub? or is there a figure i need to factor in like

Cuft-__?__=cubic ft of box with the sub

noob question i know

akheathen
08-15-2011, 12:13 PM
look up your specs/parameters of the sub. it should tell you driver displacement. you just subtract that from the net volume and you're good

bubbagumper6
08-15-2011, 12:28 PM
Generally those specs are AFTER displacement. So if it your sub says it needs 2 cubic feet of airspace and has a displacement of 0.5 cubic feet then your enclosure would need to be 2.5 cubic feet.

chevyboy91
08-15-2011, 12:54 PM
Generally those specs are AFTER displacement. So if it your sub says it needs 2 cubic feet of airspace and has a displacement of 0.5 cubic feet then your enclosure would need to be 2.5 cubic feet.

thats what i was thinking, kust wanted to make sure i was correct. thanks for the info