View Full Version : Down Sizing !!!

08-11-2011, 08:45 PM
Item(s) for Sale: Rockford T2500.1Bd is 9/10 cos. 10/10 mech. Have box and manuals and im pretty sure the birth sheet is in there too 3303 Rms @1ohm
(4) Sa -10s D2s All are prolly 9/10 cos. and 10/10 mech- They are still pretty stiff.
Small battery with top mounts not sure how old it is but is holding a 12.4v charge when i put the dmm on it
Red top Battery about 1 1/2 years old i think holding a 12.5v on dmm
i have got close to 50 feet of weld wire 20 feet 0/2 and the rest is 0/1 Not the best flexing wire but is copper the whole way through both are rated for 600 volts. Longest pieces are about 18 feet long bunch of shorter piece Plenty to wire a vehicle from front to back

Rockford amp - 465 shipped
Sa10s - 130 + shipping a piece or 480+ shipping for all 4
small battery - 25 + shipping
Red Top- 50+ shipping
Wire- i will only sell as a whole not cutting it up anymore 70 + Shipping

I will get pics up by Saturday Away from the home on a trip right now.
I also dont have much feedback because i dont sell much i normally keep it til it dies or sell local. Will answer any questions you may have and gett items to you as quickly as i can

I am looking for trades Looking right now for smaller mono amps and 8in subs but let me know what you have and we may work something out

Thanks for looking

08-11-2011, 09:59 PM
Pics man.

Bettr n' Revrse
08-11-2011, 10:04 PM
What are some of the lengths of the welding cable?

08-11-2011, 10:06 PM
Would you be interested in an eD 9.1 + cash for the Rockford?

08-12-2011, 03:35 AM
Again I will post pics saturday when i get home

I can also measure some pieces of wire saturday

08-12-2011, 03:52 AM
ditto on the wire.. unless there are atleast two long runs es no good for me

08-12-2011, 09:40 AM
**** woould like that rockford, i have 1 in my magnum pushing 4 eclipses and now im putting together a system for my 95 maxima, but i think that would be too much for my 2 10w7's

08-12-2011, 10:04 AM
Knew I seen this ad somewhere else. Good to have people from the same town on here.......

08-12-2011, 10:08 AM
Oh and around what range rms amp you looking for?

08-12-2011, 11:29 AM
I have a rockford t15001bd I would be interrested in the 2500, i also have a t2 10 d4 if interrested, it is 1000 rms. birthsheet on the 1500 is 1917 if i remember correct

08-12-2011, 12:22 PM
Im looking for about 1200 to 1400 rms at 1 ohm

08-12-2011, 12:24 PM
Yea ad is on craigslist but most of those guys dont know what sundown is I actually had a call and guy tried to tell me he saw those subs at a flea market and offered me 200 for everything I laughed and asked what flea market

08-12-2011, 01:13 PM
Want some bad *** 6.5 components If someone wants to try out some Sa10s i would prolly trade them for a sweet set of components

Pending Deal on rockford

08-12-2011, 02:02 PM
interested in RF amp.
have a RF power elite t500-2 that does 1300rms at 1 ohm, 1000 at 2.
i gots monies too

08-12-2011, 02:09 PM
Price shipped on the Red top to 12487

08-12-2011, 03:27 PM
Pms sent to all

08-12-2011, 10:21 PM
Just got home will have pics up tomorrow of the equipment

If i can sell the Sa10s by the end of the weekend i will let them go for 425 + shipping They will be shipped in the boxes they came to me in from sundown Lets get this going

Still looking for a amp that does 1200-1400 at 1 ohm

08-12-2011, 10:24 PM
Rockford amp for my aq2200?

Bettr n' Revrse
08-12-2011, 10:28 PM
I didn't get a pm :(

08-13-2011, 06:26 AM
i have a memphis reference. birthsheet says it does 1287 rms at 1 ohm.

08-13-2011, 05:36 PM
PM sent on T2500 also have a MB DSC 1500 if your interested in a partial trade.

08-13-2011, 07:36 PM
My camera disappered so these are with my phone but they are pics


Trucks a bit dirty but i been moving a lot of stuff around lol

08-13-2011, 07:39 PM
As for the weld wire Longest piece i have it about 16 1/2 feet long the next longest is 12 and a few inchs then a few pieces are 6 foot maybe 4-5 pieces then like 3-4 pices under 3 foot

08-13-2011, 09:47 PM
Update got the box out for the t2500 and i dont have the manuals as stated above i will check in my files but as of now THERE IS NO MANUALS WITH THE ROCKFORD

Deal pending right now for the subs and amp to a local guy will update after we meet tomorrow

08-14-2011, 04:56 PM
price shipped on the sa 10's to 20690

08-14-2011, 05:10 PM
Im looking for about 1200 to 1400 rms at 1 ohm

the eD 9.1 amp that buck is offering you does exactly that. 1200 @ 12.5v @ 1ohm. I've got one and it's a tank!

08-15-2011, 12:58 PM
400 + shipping on the Sa10s the things are monsters just tired of not have any space in my truck 25lbs a piece best price i can do Lets sell these things

Deal pending on rockford

08-15-2011, 04:34 PM
Let me know about the rockford amp if that deal falls through. you still have my number to text me if you want to?

08-16-2011, 12:47 PM
Amp is gone....

No one wants some sick 10in subs for 100 a piece

08-16-2011, 12:53 PM
great price... still got the batt redtop?

08-16-2011, 12:58 PM
i do have the red top and the other batt

08-16-2011, 01:05 PM
pm me shipped price to 53185. im assuming it can fit in a flat rate box from usps.

08-16-2011, 07:44 PM
Will break the 10s up if you wanna buy pairs