PDA

View Full Version : had a wired dream last about an enclosure



optimusprime
08-07-2011, 10:01 AM
it was a sub floating in a cup shaped enclosure it had a small space around the inside between the woofer and cylinder. im tryng to use google sketchup to draw it up. would something like that work ill post pics from sketch up when im done if you dont understand what i mean.

optimusprime
08-07-2011, 10:02 AM
**** still half asleep said wired instead of weird.

RAM_Designs
08-07-2011, 02:19 PM
pics?

pro-rabbit
08-07-2011, 06:14 PM
pics?

Might be a min...he went form half asleep to full asleep

bubbagumper6
08-07-2011, 06:21 PM
http://www.autotoys.com/pics/BT1014.jpg

:confused:

optimusprime
08-07-2011, 06:25 PM
computer went bleh at me i have to re do it and no not like that

05trailblazer
08-07-2011, 06:42 PM
lol im wired up in thos ho3 now. yea the closest thing to your dream is a basooka' which is wack imo/.

optimusprime
08-07-2011, 06:46 PM
http://i54.tinypic.com/1zy92xt.jpg

ok the gray disk represents the sub and in my dream nothing was holding it up but im pretty sure maybe 5-6 poles inside coming up from the bottom to the edge would hold it and also the gap between the cylinder and the sub was smaller would that work as some sort of port?

Imtjnotu
08-07-2011, 06:48 PM
:crashcom:

Imtjnotu
08-07-2011, 06:49 PM
all i can think of is he has the sub in a cylinder that has another cylinder around out so its like a port thats around the whole sub

bubbagumper6
08-07-2011, 06:51 PM
http://i54.tinypic.com/1zy92xt.jpg

ok the gray disk represents the sub and in my dream nothing was holding it up but im pretty sure maybe 5-6 poles inside coming up from the bottom to the edge would hold it and also the gap between the cylinder and the sub was smaller would that work as some sort of port?

There's no length to the port, I bet that would sound like ****.

optimusprime
08-07-2011, 06:53 PM
all i can think of is he has the sub in a cylinder that has another cylinder around out so its like a port thats around the whole sub

i know literally nothing about building enclosures. would that make it not "sound like ****"?

05trailblazer
08-07-2011, 06:54 PM
that kind of looks like the hole in the movie the ring, where that crazy b1tch came out from

Imtjnotu
08-07-2011, 06:55 PM
anything like this?

http://i51.photobucket.com/albums/f362/imtjnotu/Untitled.png

pro-rabbit
08-07-2011, 06:56 PM
i know literally nothing about building enclosures. would that make it not "sound like ****"?

Most people would call that a well, but hey..to each their own lol.

Bassin Buick
08-07-2011, 06:57 PM
was your dream wired in series or parallel?

optimusprime
08-07-2011, 06:58 PM
anything like this?

http://i51.photobucket.com/albums/f362/imtjnotu/Untitled.png

yes i am assuming it has been done?

pimpnyou204
08-07-2011, 07:00 PM
^^ I think he means like that but the sub floating in the box.. or sticks poles etc holding it up level with the opening in the cylinder.. While the cylinder is wider than the sub and that acts as a port.

optimusprime
08-07-2011, 07:02 PM
^^ I think he means like that but the sub floating in the box.. or sticks poles etc holding it up level with the opening in the cylinder.. While the cylinder is wider than the sub and that acts as a port.

you got it but as mentioned earlier it would most likely sound like ****. so im guessing adding a tube under the sub would help that.

bubbagumper6
08-07-2011, 07:03 PM
^^ I think he means like that but the sub floating in the box.. or sticks poles etc holding it up level with the opening in the cylinder.. While the cylinder is wider than the sub and that acts as a port.

You're a few posts behind brah :fyi:

Louisiana_CRX
08-07-2011, 07:15 PM
Martin Luther King Jr had a wired dream also :fyi:

hispls
08-07-2011, 07:32 PM
In theory you could make it function with a large enough box so that the almost non existant port depth would still tune to something, however; ideal arrangement for ported box is to NOT have the port right on top of the woofer. You get turbulence issues that are unpredictable at best. I've seen some walls, that with a large enough box and enough cone area will pretty much just use trim rings to hold the woofers and the space around all them becomes your port area.....seen pics and never heard them so I can't say how they perform.