PDA

View Full Version : need aeroport length!!!



usarmy1494
07-31-2011, 07:33 PM
i am stuck on this part. iam so stressed on trying to find out how long the port needs to be.

could someone just tell me how long i need to just the middle tube to so it matches the calculator.


*im using a 6" precision port.


http://img29.imageshack.us/img29/7660/xl15.png

CHEMMINS
07-31-2011, 07:37 PM
Products Menu (http://www.psp-inc.com/tools.html)

Go there.....all ya need

Imtjnotu
07-31-2011, 07:43 PM
Beat me to it chem

usarmy1494
07-31-2011, 07:45 PM
i was on that. does Straight length port required mean thats how long the middle is. and Flare length port required means how long it is with the flared ends?

Imtjnotu
07-31-2011, 08:10 PM
yes

usarmy1494
07-31-2011, 09:47 PM
so the the flared ends only add a inch...

CHEMMINS
07-31-2011, 10:21 PM
Well the pipe is shorter and 50% of the flares depth adds to the port length.

usarmy1494
07-31-2011, 10:49 PM
so on the box calculator when i t says the port has to be 11 inches long do i just cut the middle to 11 inches then put the flared ends on??

CHEMMINS
08-01-2011, 05:23 PM
Flared length or straight pipe measurement.

Straight pipe measurement is if you have no flares, thats what you run total.

Flare length is total including the flares. So if it is 20", just subtract what the total of your flare length to get the straight length. aka 20" minus 3" minus 3" = 14" straight pipe length.