PDA

View Full Version : Orion HCCA TC-9 motor with 12" 4 spoke basket



Digital Designs
07-08-2011, 02:55 PM
Like the title says, looking to sell my blown Orion HCCA 12d. This is from the early 2000s and I have been told is TC-9 based. I am NOT able to get the basket separated from the motor so please DONT ask if I will split them up. They are both in decent shape, minor scratches on the sticker on the bottom of the motor. This includes motor, 12 inch 4 spoke basket, motor rubber cover, terminals that were on the sub, and a rubber mounting gasket. I will also throw in the stock dustcap if you want. I will start this out at $100 plus actual shipping. That is NOT a firm price so make an offer if you want it. Not really looking for trades unless you have a D2 SA-8 or a single 4 ohm DD1508. I will try my best to get rid of the extra pieces of the spider left on the basket before shipping. Thanks for looking, here are pics.

http://i125.photobucket.com/albums/p46/Micah_Jones/0708111442.jpg

http://i125.photobucket.com/albums/p46/Micah_Jones/0708111444.jpg

http://i125.photobucket.com/albums/p46/Micah_Jones/0708111446.jpg

BlactimusCrime
07-08-2011, 05:05 PM
beast platform to build on, GLWS

Digital Designs
07-08-2011, 05:10 PM
beast platform to build on, GLWS

Thanks bruh

fasfocus00
07-08-2011, 06:43 PM
pic of pole without dust cap over it, please

Cali_Screw
07-08-2011, 09:43 PM
one of my favorites!

Cali_Screw
07-09-2011, 01:06 AM
Yea, if i can get a pic of the pole vent, im interested in buying this!

Digital Designs
07-09-2011, 02:12 AM
Sorry guys, terrible cell pic. The vent is NOT shifted or crooked or anything, just a bad angle. This is the best I could do though.

http://i125.photobucket.com/albums/p46/Micah_Jones/mms_picture4-1.jpg

http://i125.photobucket.com/albums/p46/Micah_Jones/mms_picture5.jpg

Digital Designs
07-09-2011, 06:26 PM
Bump to the top $80 plus shipping.

Digital Designs
07-11-2011, 01:41 AM
$95 shipped, try and beat that price.

tc300
07-11-2011, 02:32 AM
Nice....

tc300
07-11-2011, 02:33 AM
I think i seen this motor with a sliver pole piece once b4..??
Could it be a diff variation of the HCCA?

Digital Designs
07-11-2011, 02:34 AM
Nice....

Buy me. If I was able to get the **** basket off, this would make an awesome 10.

---------- Post added at 02:34 AM ---------- Previous post was at 02:33 AM ----------


I think i seen this motor with a sliver pole piece once b4..??
Could it be a diff variation of the HCCA?

Never seen that before. Possibly though.

tc300
07-11-2011, 02:51 AM
Any reason why you can't get the basket off??

Digital Designs
07-11-2011, 02:55 AM
I dont have the correct tool to unscrew the bolts. They are sort of like a hollow Torx bolt, at least thats what it looks like to me.

tc300
07-11-2011, 03:17 AM
Ooooooooo..... Ic. That sux!
I kinda noticed that in one of the pics. If it's one of the bits I'm thinking of there expensive!!
It's considered a special bit not widley used.

What bit numbers have you tried??

tc300
07-11-2011, 07:08 PM
Hey you looking for any trades???

Digital Designs
07-12-2011, 06:06 PM
Yeah, what you got? I would trade for a D2 Sundown SA-8 or a 2 channel amp, or just about anything actually lol I will PM you

Digital Designs
07-13-2011, 01:16 AM
To the top.

indytrucks
07-15-2011, 10:07 AM
The tool to get the basket off is called a safety torx bit. They aren't expensive. In fact, nost decent tool kits come with some. GLWS.

Flastrongman
07-15-2011, 11:15 AM
what size 2ch amp do you need? I got a bunch

Digital Designs
07-17-2011, 03:27 AM
The tool to get the basket off is called a safety torx bit. They aren't expensive. In fact, nost decent tool kits come with some. GLWS.

Thank you very much, sir. I will have to look into buying one soon if someone doesnt want this with the basket.


what size 2ch amp do you need? I got a bunch

Whatever you have really. Just something decent. Something like 60-100 rms by 2. Not really all that picky.

Digital Designs
07-17-2011, 04:41 PM
Get this thing out of my house, $65 plus shipping is the LOWEST I WILL GO! If it doesnt sell soon I am going to rebuild it into a 10, or 18, or something. lol