PDA

View Full Version : 15" Angles Box Ideas?



Bettr n' Revrse
07-02-2011, 09:59 PM
My other 15 is on its way and Id like to get some boxes now... The problem is that I can only have a height of 16 inches so itll have to be angled to fit... I want two boxes not on big one so I was thinking something like this
http://www.soundmaster.com.au/bookpic/SB15.jpg
http://www.petpeoplesplace.com/petstore/pet-image-large/dual-15-inch-subwoofer-sub-box-two-speaker-enclosure_350397443771.jpg

Needs to be about 2.25 or so sealed for each...

Bettr n' Revrse
07-07-2011, 01:58 AM
Up

justafifteen
07-07-2011, 02:37 AM
My 15" AQ is in a box that is 16" high. Just predrill the holes

Bettr n' Revrse
07-07-2011, 02:41 AM
My 15" AQ is in a box that is 16" high. Just predrill the holes

I will be lucky to fit 16" high thou so Ill have to find a box thats angled...

Bettr n' Revrse
07-10-2011, 04:43 AM
Up

9515ROB
07-10-2011, 05:00 AM
just build one to how you need it

Bettr n' Revrse
07-10-2011, 05:02 AM
just build one to how you need it

I dont have much for would working tools and hate carpentry lol... but its looking like I may have to if i wanna try these subs...

justafifteen
07-18-2011, 06:18 PM
I will be lucky to fit 16" high thou so Ill have to find a box thats angled...

Well if you can fit 16", I can tell you now that your sub will def fit. My box is 16" high, and I only had about 1/8" of clearance while getting it into my trunk, but hey, it fit.

pro-rabbit
07-18-2011, 06:24 PM
angle enclosures are not to hard to make really. Just measure out the area you have to work with and see what you have.

If you have 16" height available then you won't need an angle. However, you better make sure that your cut out for the sub is centered.

RAM_Designs
07-18-2011, 10:30 PM
angle enclosures are not to hard to make really. Just measure out the area you have to work with and see what you have.

If you have 16" height available then you won't need an angle. However, you better make sure that your cut out for the sub is centered.

This.