PDA

View Full Version : Box design



jkrswld
06-13-2011, 11:44 PM
This going to be the design of my box for 4 12's. I was wondering what is the best way to get the right airspace in a design like this. I was thinking of building the box with individual chambers for each sub. Your ideas.

RAM_Designs
06-14-2011, 12:24 AM
Individual chambers...so it's a sealed box? Just asking since it looks like you have a vertical port in the middle.

smd4life
06-14-2011, 12:25 AM
flat surfaces....it can be done

jkrswld
06-14-2011, 12:26 AM
It will be ported just didnt add the ports yet. the slot in the middle was just to show where the 2 pieces come together and might do some neons or something not sure yet. Thanks ram for the input

jkrswld
06-14-2011, 12:29 AM
flat surfaces....it can be done

the subs in the rounded corners are my biggest concern

smd4life
06-14-2011, 12:31 AM
the subs in the rounded corners are my biggest concern

good luck with that..anything is possible, maye a flat side speaker ring glued-n-screwed to a piece of kerfed mdf?

jkrswld
06-14-2011, 12:32 AM
the front of the box will be fiberglass so all the subs will be in rings. Should be an interesting build for me

smd4life
06-14-2011, 12:36 AM
the front of the box will be fiberglass so all the subs will be in rings. Should be an interesting build for me

if you have a lot of experience with glass that sounds like a fun project.....keep us posted, but ive never been a fan of glass sided vented enclosures

RAM_Designs
06-14-2011, 12:39 AM
It'll be easy if you just make some 45 angles.

edit: didn't see you're wanting to fiberglass.

jkrswld
06-14-2011, 12:39 AM
I am decent with glass. jumped in head first on my wifes build and learned a lot. I dont mind the glass sided boxes gives you a little more room to improve the looks a little. plus I am building it more for sq.