View Full Version : Alpine Mono Amps

Ryan shaw
06-01-2011, 10:32 PM
1. Product:
Alpine pdx 1.1000
Alpine mrd-m1005

2. Specs:
Alpine pdx
Mono subwoofer amplifier
1,000 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)
4Layer Glass Epoxy PC Board
Variable low-pass filter (50-200 Hz, 24 dB/octave)
Class-D amplifier design
Stackable installation design with front-panel controls
Quick-connect speaker connectors
Thermal Management Processor
Preamp-level inputs and outputs
MOSFET power and output stages
STAR Circuitry
Auto Over-Current Protection
Top Mounted Blue LED Power/Status Indicator
Integrated Wire and Mounting Screw Terminals
One Side Terminal Layout
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Gold Plated Power Screw Terminals
Non-Fading Pre-Amp Output
CEA-2006 compliant
Fuse rating: 20A x 4
4-gauge amp wiring kit with 80-amp fuse recommended
Dimensions: 10-3/16"W x 2-1/2"H x 8-7/8"D
Alpine mrd

Mono subwoofer car amplifier
500W x 1 RMS (4ohm, 12.0V, 1% THD+N)
700W x 1 RMS (2ohm, 12.0V, 1% THD+N)
700W x 1 RMS (4ohm, 14.4V, 1% THD+N)
1.000W x 1 RMS (2ohm, 14.4V, 1% THD+N)
Max. 1.800W x 1
S/N Ratio 90dBA
Internal, variable-speed cooling fan
Amp Link for single-cable hookup to compatible Alpine receivers
STAR Topology for cleaner sound<LI sizcache="1" sizset="124">Bass Engine® features:
Low-pass digital filter, 30-200 Hz, with a selectable 12 or 24 dB/octave slope
Selectable subsonic filter (off, 15Hz, or 30 Hz)
Parametric EQ variable from 30-160 Hz, ±12 dB
Bass Compensator enhances low-end definition
Top-mounted digital control center with cover
CEA-2006 Compliant
MOSFET power supply and output stages
Preamp outputs
Time correction 0-10 milliseconds in 0.1ms steps
Phase adjustment 0-180
Turn-on delay
Requires 4-gauge power and ground leads and 80 amp fuse
Extra-large terminals
Fuse rating: 20A x 4
Dimensions: 13"W x 2-5/16"H x 8-11/16"D

3. Description/Condition:

Both mint, pulled out of show cars at ultimate electronics

Alpine pdx - 330 shipped
Alpine mrd - 220 shipped (SOLD)

june1018.jpg picture by ryanshaw3ball - Photobucket (http://s1132.photobucket.com/albums/m578/ryanshaw3ball/?action=view&current=june1018.jpg)

06-01-2011, 11:24 PM

Ryan shaw
06-02-2011, 12:50 AM
Oops, prices are up

Suicide Bobb
06-02-2011, 04:38 AM
I want that mrd...post gutz?

Ryan shaw
06-02-2011, 08:46 PM
I'd prefer not no take it apart really, let me see if I can find one on archive.

Mrd has a screen for voltage measurement...WHY DON'T ALL AMPS HAVE THIS? Lol

Ryan shaw
06-02-2011, 08:48 PM
Just noticed that both amps are missing their fuses...wtf ultimate electronics?


Ryan shaw
06-03-2011, 11:20 AM
sorry but the mrd sold this morning on ebay.

PDX still up for sale

Why So Cereal?
06-03-2011, 08:11 PM
any trades on the PDX? pm me if interested, if not free bump

Bettr n' Revrse
06-03-2011, 08:13 PM
Yes any trades?

Ryan shaw
06-05-2011, 11:32 PM
Not much. 6" aero's if you got em, anything tc sounds probably

Ryan shaw
06-08-2011, 08:04 PM
Pdx still sitting here rotting away. Well not really rotting but getting lonesome at least

06-11-2011, 11:00 PM
I'm interested on that pdx
would you be interested on a ECLIPSE 7200MK2 ?
it has the copper chassis and the 8 volt plus all that good stuff.
let me know.

Ryan shaw
06-13-2011, 01:22 AM
sorry, i'll pass i just got a new double din

Ryan shaw
06-13-2011, 08:32 PM
Mrd is back up for sale, guy fell through