PDA

View Full Version : Items needed to Finish my Install (Batts, Alt, 25ft. 1/0 wire)



bgolightly82
05-29-2011, 11:11 PM
Want to Buy to finish my install.
Still need Batteries. Running about 5k daily, so I figured I'd run an XS D1200 under the hood, and a D3100 in the trunk

Also need about 25ft. of 1/0 to finish my Big 3. Doesn't matter which color but I want quality wire. Could use some good ring connectors as well.
And about 50ft. of good speaker wire, prefer 10g.

And the main item need; Still need an HO Alt. It's for an 03 Grand Am so I think they make 250's and 270's, either is fine, but I'm looking for quality (Mechman, DC, or Excessive) If you have one that will fit my GA, please let me know!

Have cash in hand, so if you have anything I'm looking for, let me know!

infamous_e46
05-29-2011, 11:12 PM
i have 25 ft of very flexible 2/0 same physical size as 1/0 but more copper in it and 20 ring terms

bgolightly82
05-29-2011, 11:20 PM
What brand is it? What are you looking to get for all?

infamous_e46
05-29-2011, 11:21 PM
What brand is it? What are you looking to get for all?

flexaprene

138 shipped conus for everything

bgolightly82
05-29-2011, 11:35 PM
No thanks....that's a little high. I can get Knu wire for half that

infamous_e46
05-29-2011, 11:39 PM
go do that then

bgolightly82
05-29-2011, 11:40 PM
How much for like 15ft with 4 connectors?

infamous_e46
05-29-2011, 11:41 PM
all or nothing but it is 2/0 welding cable and it is rated for 450 amps at 25-50ft

ejschultz
05-29-2011, 11:48 PM
I've got some Stinger Pro OFC wire I'll ship for $50. I've got about a 4 foot run, a 17 foot run, and a 3 foot run. I don't know how you'd be cutting it up, but that's 24 feet.

bgolightly82
05-29-2011, 11:54 PM
Is the stinger wire Aluminum?

ejschultz
05-30-2011, 12:02 AM
OFC, oxygen free copper, some of the best stuff out there. I don't have any pics of it right now, but if you check out my build log, you can see it installed in my car somewhere in there. The last page shows the newer wire I put in. I only replaced it because I picked up a different battery terminal and re-did some other wiring to connect to the side post on my battery for a cleaner look. I'm OCD.

bgolightly82
05-30-2011, 12:22 AM
Yah that might be enough....this is for my big 3 connections so i know it's enough, but i'll have to do some more measuring to see if the footage you have will be right....i will get back to you on that....$50 the best you'll do? I'm in Michigan

ejschultz
05-30-2011, 12:26 AM
I might be able to work something else out if I can fit it into a flat rate box. I'll definitely try to hook you up with it.