PDA

View Full Version : Only 1.7 cubes for a pair of ID CTX 10"s and want 28hz tuning... what to do?



skylineTT
05-23-2011, 11:24 PM
I'm building for a 93 ranger single cab with bucket seats.. this only allows me enough dimension for 1.7 cubes with .5" MDF.. (50"wide)x(13" tall)x(8" bottom depth)x(4" top depth)

subs are Image Dynamics CTX 10"s on an MTX 4002.
I can build the box no problem, but i feel that this isnt enough space and i will have to do external aeros to get 28hz tuning.

What do you guys think?

JL Audio
05-23-2011, 11:33 PM
polyfill out the azz.

skylineTT
05-23-2011, 11:33 PM
for realz? I've never messed with polyfill

Haunz
05-23-2011, 11:37 PM
That small AND you want ported... ?

IDK the subs very well so fell free to post the t/s, but either way if your customer has cash there are some clever passive circuits that can be built to make any sub work in any box... :fyi:

RAM_Designs
05-23-2011, 11:45 PM
Use a passive radiator.

Kangaroux
05-23-2011, 11:54 PM
^^^ yeah you'll have to do something like this. you could do external aeros but tbh there isn't a "nice" way of doing them lol. especially for a 28hz tuning you need plenty of space for port and with a limited space to work with it's just not possible with a normal slot

skylineTT
05-24-2011, 12:01 AM
http://i69.photobucket.com/albums/i57/all-names-were-taken/IMAG0101.jpg

The manual recommends 1.2 @ 28hz for 1 sub..

or .75-.9 sealed. this is looking better but i didnt really want to seal em.

skylineTT
05-24-2011, 12:02 AM
And i could use a PR in between the seats and it would look like a single sub setup. would i leave the box sealed that way?