PDA

View Full Version : 2 15s exteded cab s10 xtreme



ryvar1994
05-23-2011, 01:59 PM
I have 2 15s in my s10 now sub and port forward i dont really have the money to get a new box yet so this box is just temp.the box im using is one i had in my explorer and customized to fit in the s10 i was just wondering if turning the box around so its facing the bed of the truck instead of facing the seats like they are now would make any difference? and also does anyone have any ideas for a new box i want to build like which direction port and subs are and sizes. i am around 6'2 i would like to keep leg room and still be able to lean back my seat just a little. so pics or ideas would be nice thanks

bhsdriller
05-23-2011, 02:13 PM
subs forward with the port facing up usually works well in ext. cab trucks
Putting 2-15's in my truck and that's what I went with

ryvar1994
05-23-2011, 10:52 PM
where was the port located in the top?

NoLoud4U
05-23-2011, 10:56 PM
where was the port located in the top?

I would put it as close to the rear glass as possible so the sound can roll of the back

ryvar1994
05-23-2011, 11:06 PM
so a long thin port across the back of the box with the subs pointing foward?

RAM_Designs
05-23-2011, 11:10 PM
so a long thin port across the back of the box with the subs pointing foward?

Don't make it too skinny, keep a 1:8 or lower ratio to keep there from being too much drag on the port due to the increased surface area inside of skinnier ports.

ryvar1994
05-24-2011, 02:10 PM
im not exactly sure what that means im still trying to learn the about boxes i dont really know much about them haha so english please? haha thanks

bhsdriller
05-24-2011, 02:18 PM
here's mine...port off to one side. Have done a couple like this and they work great
http://i247.photobucket.com/albums/gg137/bhsdriller/Picture065.jpg

RAM_Designs
05-24-2011, 08:59 PM
here's mine...port off to one side. Have done a couple like this and they work great

They seem to work great in 4-door truck as well. Did a pair of MJ-18's like that and they pounded.

05fronty
05-24-2011, 09:16 PM
here's mine...port off to one side. Have done a couple like this and they work great
http://i247.photobucket.com/albums/gg137/bhsdriller/Picture065.jpg

what fabric is that? i may have to get some for my new box

ryvar1994
05-25-2011, 11:57 AM
what are the dimensions on that box bhsdriller? just wondering and what subs are going in it?

bhsdriller
05-25-2011, 12:00 PM
48w x 24h x 18d......2 15" xcon's

barely going to fit in the back of my truck and still be legal for competing

ryvar1994
05-25-2011, 12:02 PM
what kinda truck? i think 18 inches deep in a s10 would be kinda crazy hahaha