View Full Version : Us Amps Merlin Md2d [email protected]

05-21-2011, 06:25 PM

Us Amps MD2D mono sub amplifier
550W RMS x 1 @ 4 Ohms
1000W RMS x 1 @ 2 Ohms
1500W RMS x 1 @ 1 Ohms
Frequency Response: 20Hz - 250Hz
Variable Crossover Control: 40Hz - 250Hz, 24dB/Octave, Butterworth
Variable Bass EQ: 30dB Boost @ 45Hz
Subsonic Filter: 15Hz - 40Hz, 24dB/Octave
Low Level RCA Input
1 Gauge Power Inputs
8 to 18 Gauge Speaker Outputs
Power and Protect Indicators
Class D
Dimensions: 2-1/2"H x 10-1/2"W x 18-1/4"L

Item(s) Description/Condition:

The amp has been tested and it works great. i load tested for a few hours with no problems at all.. it has not been repaired before..

cosmetically, the amp is very clean .it has a few scratches, but nothing that hurts the performance. has all the power and speaker terminal screws. still has the original plexiglass bottom that is crack free...


225.00 shipped to the cont usa

Shipping and Miscellaneous Item Information:

Item Pictures:




(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

05-22-2011, 08:06 PM

05-23-2011, 08:30 AM
i have a question .. i got a md2d while back mine don't have a plexie glass bottom and the inputs are not on the end they are along the side under where your us amps logo is whats the difference ? between mine and your different year designs ?mine also says in the booklet that is does 1800 @ 1 ohm im going to pm u the listing that has the pictures so i don't dump on your listing just incase it might have come across it sounding like that . im not in anyway just curious between the difference in appearance

05-23-2011, 03:48 PM
pmed you back apollo...

this amp is sold!