View Full Version : NON-WORKING Memphis 16-MC3004 amp

04-20-2011, 10:50 PM
Item(s) for Sale: Memphis 4ch amp. Cosmetic 7/10 Mechanical 0/10

Item(s) Description/Condition: Amp isn't in horrible shape. Could use a cleaning with some scuffs. Not exactly a show car amp. No burn marks on either side of the board. Nothing looks damaged and caps are not swollen. When fuses are put in they pop after about 5 secs. I do not know how to repair amps. Sold an amp to a lady and this one was the one in her car. Unknown circumstances on how it ended up this way. Your guess is as good as mine

Price: $60

Shipping and Miscellaneous Item Information: Buyer pays shipping. Only accept paypal from people with feedback.

Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

04-22-2011, 01:27 PM
Still here. Make me an offer or trade! I may be overlooking something on this amp, so its probably an easy fix. If you know what it is or could be feel free to share the knowlege!

04-22-2011, 07:28 PM
Sounds like it has a blown output transistor or two if its popping the fuses after it powers on for a few seconds. Probably only on one side or channel. Shouldn't be a very expensive fix as long as the parts are readily available.

04-23-2011, 01:54 AM
Great to hear! Any testing i can do on them? Resistance on them or anything?

11-04-2011, 10:00 PM
Forgot about this, But still have! any offers?

11-05-2011, 10:20 PM
any trades?

11-05-2011, 11:25 PM
Always, for you i would ship first, anyone below 5 feedback will have to ship first.

11-07-2011, 11:47 PM

11-08-2011, 12:20 AM
Any intrest in a new set of Digital Designs 6.5 coaxials...I have a new set here Im not using...

DD Audio: Mobile Audio | Components | Coax | CXS 6.5 (http://ddaudio.com/mobile-audio/components/coax/cxs-65.aspx)

11-09-2011, 05:27 PM
I would, but I have no use for any speakers right now. Thanks, though. UP

11-09-2011, 07:35 PM
any interest in an old school 2channel? i have to dig a few out, but i have an underrated malibu100. iirc, it was over 200x2, or 400x1@4

11-10-2011, 06:08 PM
Not really TBH. right now I have too many amps and not enough subs, lol.

11-12-2011, 04:48 PM
So, anyone able to quote me a price to fix this? Thinking of fixing and using for my car. I've fixed things before,mainly replaced resistors or caps, unsure how to test anything else. Will even pay if you teach me!

11-16-2011, 08:28 AM

11-16-2011, 05:54 PM
well, from what it sounds like to me, you may need, and definately should be using a scope. there are some things you can ohm out on the transistors, and it is possible that there is a shorted output(s) which you could test by checking for dc power on the speaker terminals when you turn it on. wire a headlight in series with the power too keep the current limited. if you find that, look for shorting on any of the transistor legs. if not, it sounds like a problem in the power supply drive/control section, which is not switching proper. if that is the case, then the scope is needed to see what it is doing. you can take the voltage readings at the control ic legs, but to be sure that it is operating proper, once repaired, the scope will make sure that you do not blow all the time and parts on what you just did.