PDA

View Full Version : Imput on these mids?



BIGTOSH
03-11-2011, 06:00 PM
DIYCable.com : Intro Home Exodus Subwoofers (http://www.diycable.com/main/product_info.php?cPath=24&products_id=538) Just want to know about these and get some ideas on tweeters to run with them. I have a pioneer880 running active and will be using them in my doors. the doors are fully deadened and tweeter mounted above them off axis.

okiedokie
03-11-2011, 07:23 PM
Best sounding 7inch I have ever owned.
If you have the room & power to run them, then maybe give them a try.
There is a 5 & 8 coming out around April or may which will be at a lower introduction price.

BIGTOSH
03-11-2011, 09:26 PM
Best sounding 7inch I have ever owned.
If you have the room & power to run them, then maybe give them a try.
There is a 5 & 8 coming out around April or may which will be at a lower introduction price.

How do you have them installed? What kinda power? What tweeters?

RAM_Designs
03-11-2011, 09:55 PM
I have a pair sitting in their shipping box in my truck...they're about a half inch or so deeper than my ID OEM's, so it's going to be hard to get them to fit. I've heard great things though, ciaonzo loves them as well.

okiedokie
03-12-2011, 03:10 AM
I have a Scion Tc.
I installed them in my doors then i built a ported box & then sealed it up to compare which i liked better.
Pheonix Gold= 125 per side
Eclipse= 65 per side
MB Quarts= 62.5 per side then i bridged the amp so around 250 per side.
JL audio Slash 500/1= 250 per side, even if this amp is underated at 500.

Tweeters i played with are SB Acoustics neo, & some Vifa large format which i really like paired with the Anarchy Mids.
I Cant remember my x-over points.
I'm going buy the 5.1/4 & the 8's when they come out around May.

Theride
03-12-2011, 10:35 PM
how deep are these things? looks like you would need a very deep door to fit these in?

RAM_Designs
03-12-2011, 10:52 PM
how deep are these things? looks like you would need a very deep door to fit these in?

You definitely need a deep door, they're around 4" deep.

okiedokie
03-13-2011, 04:42 AM
3.37 depth

Inferno333
03-13-2011, 12:03 PM
The pdf says they are 3.66" deep.

That's why I never tried to use them in my tC.


I might be trying them in my Trailblazer though. We'll see if I have the depth when it warms up a bit.

okiedokie
03-14-2011, 12:45 AM
^^^ Here's the pdf
http://www.diycable.com/main/pdf/AnarchyDocs.pdf
Learn how to fabricate your doors.

Cruzer
03-14-2011, 01:00 AM
Sick excursion/mid bass plus the xbl2 motor allows them to play to 4-5k hz clean