PDA

View Full Version : 6ch of Old School RF Trans-ana Heaven...400x4 and 200IX w/ spacer, end caps, and more



BassAddictJ
02-14-2011, 01:05 PM
Item(s) for Sale:

Rockford Fosgate 400x4, 200IX, amp spacer, and P.G. fuse and distro block.


Item(s) Description/Condition:

They are oldies, rare, and in pretty **** good condition for their age. There 2 small scuffs between the fins, otherwise they are near perfect. Even the back panals are in excellent condition. To give you an idea of how underrated they are the 200IX is rated 400w rms @ 4ohms bridged, many have gotten over 500w out of them.

400x4 Rated specs:
13.8V
4ohms - 50 Watts per ch, less than 0.05% Total Harmonic Distortion (THD)
2ohms - 100 Watts per ch, less than 0.1% Total Harmonic Distortion (THD)
4ohms bridged - 200 Watts per ch, with less than 0.1% Total Harmonic Distortion (THD)

14.4V
4ohms 60 Watts per ch
2ohms 130 Watts per ch
4ohms bridged 260 Watts per ch

Signal-to-Noise Ratio (A-weighted) >95dB
Factory Default Crossover Point 100Hz Butterworth
Crossover Alignment 12dB/octave
Dimensions 95⁄8"W x 135⁄8"L x 25⁄8"H
(24.4cm) x (34.6cm) x (6.6cm)
Damping Factor @ 4Ω (at output connector) >150
Slew Rate 30 V/μs
IM Distortion (IHF) <0.05%
B+ Fuse Size (external to amplifier) AGU 50 amp
Input Impedance 20k ohms

link to manual:http://www.rockfordfosgate.com/rftech/library/1995/3_Amplifiers/MAN0993A_Punch_400x4_MAN.pdf

200IX specs:
100x2 @ 4ohms
200x2 @ 2ohms
400x1 @ 4ohms

built in crossover switchs/cards (Butterworth).

I couldnt find the manual for this one but as far as I know the THD and little ins and outs are the same for this amp as the 400x4.


I'm also throwing in (2) old school phoenix gold wire blocks. One is a fuse block with 4gauge in and fused 8gauge out. The other can be used for the ground to take the 8gauge in and put a single 4gauge out.



Price:


Askign 350 shipped OBO for everything. I'm open to offers so if you have a reasonable price i mind shoot me a PM and we'll talk.

NO TRADES

Shipping and Miscellaneous Item Information:

Fedex Ground

Item Pictures:
http://i105.photobucket.com/albums/m229/bassaddictj/P1170214.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170215.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170216.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170217.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170218.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170173.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170174.jpg
http://i105.photobucket.com/albums/m229/bassaddictj/P1170177.jpg

Again, shoot me an offer you think is reasonable and we'll talk

PM me with any questions.

pickup1
02-14-2011, 01:57 PM
dammit man!!

Louisiana_CRX
02-14-2011, 01:59 PM
dammit man!!

you need those ;)

dacheatham
02-14-2011, 02:06 PM
Those are beautiful

BassAddictJ
02-14-2011, 02:08 PM
someone is goig to sludged when they install these....

that spacer really ties the room together

BassAddictJ
02-14-2011, 05:07 PM
ttt

BassAddictJ
02-15-2011, 10:16 AM
these amps use a special kind of paint, and its real easy to refinish them if you wanted to


here's a pic of a kicker zr1000 that i had refinished using that same kind of paint, looks brand spanking new
http://i105.photobucket.com/albums/m229/bassaddictj/FSPics001.jpg

BassAddictJ
02-15-2011, 10:21 AM
i WILL put these on ebay if i have to

BassAddictJ
02-15-2011, 06:34 PM
so help me god i will ebay it.....

Spooney
02-15-2011, 06:52 PM
Nice amps man. I ran 6 tens off of a punch 200 in like 97. It would even handle under one ohm loads for comps . ****** old school amp

BassAddictJ
02-16-2011, 01:30 AM
goin on ebay tomorrow afternoon

BassAddictJ
02-16-2011, 03:13 PM
on ebay now

BassAddictJ
02-17-2011, 06:29 PM
they're up on ebay but im still accepting offers

BassAddictJ
02-17-2011, 10:21 PM
sold