quick question

[KARLEON]

Is it possible to add too many screws in a box? I was thinking about placing a screw every 2 inches

[Bill T.]

I was at work building mine today.. and a pound of screws were disappearing fast. Lots of screws help but remember its the glue and Liquid Nails/Silicone that hold it together.

Bill T.

[KARLEON]

I was at work building mine today.. and a pound of screws were disappearing fast. Lots of screws help but remember its the glue and Liquid Nails/Silicone that hold it together.

Bill T.

well yea, i have liquid nails and silicon caulk. Along with the 16 L shapped brackets. But i was still planning on putting a nail every 2inches around my whole box, which in the end will be alot of screws. Just didnt know if it would be a problem. the screws are corse thread drywall about 1 5/8in

[dbhittin]

i didn't use screws on my last box

[KARLEON]

what did you use?

[verylowbass1]

hey you will crack the wood if you do that make it like 3 or 3.5 inches apart and put some liquid nails inside of the box around each line and crease and on the port also....email me at verylowbass1@aol.com

michael

[maylar]

Putting screws closer than 4-6 inches apart is IMO just a waste of screws and time. If you have gaps, then you didn't cut straight enough.

[KARLEON]

Thanks for all the replies guys. Im setting up for (hopefully) tomorrow morning. Wood is already cut. I got it cut at home depot and i measured it. Everything came out pretty straight. I need to do a little sanding but a lil work wont hurt. But keep on comming with all the tips. I have my lil black book and im takin notes :nerd: